AUCTION: SURPLUS EQUIPMENT LIQUIDATION
Auction closed.
Auction closed.
AUCTION: SURPLUS EQUIPMENT LIQUIDATION
Auction closed.
Auction closed.
Description
Shanghai Clirik Machinery Co., Ltd. HGM Series Grinding Mill Package; PDC Machines, Inc. Diaphragm Compressor; American Combustion Technologies, Inc. Burner Unit and Forced Air Burner AND MUCH MORE!
x Cancel
Closed Lots
INDEPENDENT HYDRAULIC POWER UNIT
Consisting of: 1- BUYERS PRODUCT COMPANY Hydraulic Oil Tank, 20 in. x 20 in. x 15 in. (approx.) with Sight Fluid Temperature Gauge, powered by TECO WESTINGHOUSE 10 hp Electric 1755 rpm Motor having a PRINCE Close, SP25A38A9H2-R (Mfg. Date 6/5/2013), Coupled Direct Mounted Hydraulic Pump with DODGE Coupling Unitized and Mounted on a 3 ft. x 4 ft. Fabricated Channel Steel Base. (NOTE: INCOMPLETE - APPEARS NEW/UNUSED.)
SAFE - T - TANK™ CORP. COMBUSTIBLE FLUID STORAGE TANK
LS-250-SPB-1A 140402 (Mfg. Date 2/28/2014) 250 gal. capacity, UL Tag. No. S-674, 148 12 Gauge, 110 percent, Relief Venting with a capacity of not less than 56,000 cu. ft./hr., with Air Operated Pump for Stationary installation.
LOT 2 TANKS
1 ft. 11 in. x 1 ft. 11in. x 4 ft. 1 in. long Fabricated Carbon Steel, Each having 2- 2 in. Top Ports, Each with Bottom Angle Iron Hold-Down Plates.
TANK, PLASTIC
3 ft. dia. x 4 ft. long (approx.) 200 gal. (approx.) capacity, Insulated with 2 to 3 in. of Material, having Metal Cladding Exterior, mounted on 4- 4 in. sq. Tubing 15 in. high Legs with Floor Plates, having Electric powered Submersible Pump.
SLEEGERS ENGINEERING HEAT EXCHANGER, SHELL AND TUBE
H9806-2 (Mfg. Date 2003) Max Allowable 20° F @SH 75, CH25, Psi @ SH 300° F, Size 28 x 144 BEM, capacity 67 cu. Ft. Max All 20° F, Carbon Steel Shell, Stainless Steel Tube Bundle, TAG No. MO2, Top and Bottom Caps each with 8 in. dia. (approx.) Flanged Port.
HEAT EXCHANGER
For Vertical Operation, having a 64 in. OD x 12 ft. 10 in. Carbon Steel Outer Shell, with Top Cover having a 7 in. OD (approx.) Top Positioned Flanged Port with Interior Installed Stainless Steel Tube Bundle; 4 ft. dia. x 9 ft. 10 in. long (approx.) having Bottom and Top Collector Rings, 4 in. dia. (approx.) Stainless Steel with 60- (approx.) Vertically installed 1-1/4 in dia. (approx.) Stainless Steel Tubes.
TANK, VERTICAL, CARBON STEEL
1000 gal (approx.) capacity, 175 cu. ft., Carbon Steel, 8 ft. Seam-to-Seam, 4 ft. dia. (approx.) Dome Caps on both Ends, Skirted Bottom, 2- 6 in. dia. (approx.) Side Positioned Ports, Flanged, 1- 9-1/2 in. dia. (approx.) Bottom Positioned Flanged Port.
TANK, VERTICAL, CARBON STEEL
1000 gal (approx.) capacity, 175 cu. ft., Carbon Steel, 8 ft. Seam-to-Seam, 4 ft. dia. (approx.) Dome Caps on both Ends, Skirted Bottom, 2- 6 in. dia. (approx.) Side Positioned Ports, Flanged, 1- 9-1/2 in. dia. (approx.) Bottom Positioned Flanged Port.
TANK, CARBON STEEL
800 gal. (approx.) Capacity, 115 cu. ft., Carbon Steel, 5 ft. 4 in. Seam-to-Seam, 5 ft. dia. (approx.) With Oval Clean-Out Hatch, with 2- 2 in. dia. (approx.) Ports, 1- is Bottom Center Positioned and 1- is Top, Side Positioned.
STEEL FAB CO. TANK, VERTICAL, CARBON STEEL
SO 43214, NB 730893 (Mfg. Date 2013) Part No. CRNL 4040.5678901234T 400 gal. capacity (approx.) 32 in. dia. x 8 ft. (approx.) Seam-to-Seam, Domed Caps on both Ends, Skirted, having 3- 3 in. dia. Ports, 3- 1 in. Ports, 1- Visual Sight Gage, 1- Joint of 3 in. dia. x 8 ft. long (approx.) Pipe that is attached to the Tank, 1- Oval Clean-Out Hatch. MAWP 200 psi @ 400°F, MDMT -20° F @200 psi, HD.196 SH. 248.
BUEHLER TANK & WELDING WORKS TANK, LPG
S/N 12406 (Mfg. Date 1949) 287 Water gallon capacity, 84 in. Seam-to-Seam, 32 in. dia. (approx.), 200 psi. (NOTE: May NOT meet Current Certification Standards.)
TANK, FIBERGLASS, VERTICAL
575 gal. capacity (approx.) 42 in. dia. x 8 ft. tall (approx.) Flat Top and Bottom, Flanged, Bolted Clean-Out Hatch, 2- 2 in. dia. (approx.) Flanged Ports.
2 CYCLONES, HEAVY CARBON PARTICLE SEPARATION
32 in. dia. x 39 in. (approx.) Straight-Wall-Height, having Domed Top with a 12 in. to 9 in. ID (approx.) Reducing Fitting, Stainless Steel, Flanged with 4 ft. long Conical Hopper Discharge; 1- 4 in. Flanged Side Mounted Port. 1- Unit is Mounted on a 4- Leg, 3 in. dia. Pipe Frame.
LOT 2 CARBOON STEEL CONVEYOR BELT ROLLS
Consisting of 1- 22-1/2 in. dia. x 51 in. long (approx.) Carbon Steel having Shaft Hubs; 1- 15 in. dia. x 51 in. long (approx.) Carbon Steel having Shaft Hubs.
2 JOINTS PIPE
Carbon Steel, 8 in. dia. x 6 ft. 8 in. long (approx.); Flanged End Fittings, 1- is equipped with 90° Ell, Flanged.
LOT 9 PIECES DUCTWORK PIPING
Rolled and Crimped Galvanized Steel consisting of but not necessarily limited to: 1- Joint 28 in. dia. x 10 ft. long (approx.), 1- Joint 28 in. dia. x 8 ft. 7 in. long (approx.), 1- Joint 17 in. dia. x 11 ft. long (approx.), 1- Joint 11-1/2 in. dia. x 10 ft. long (approx.), 1- Joint 11-1/2 in. dia. x 9 ft. 5 in. long (approx.), 1- Piece Y-Type Ductwork 12 in. dia. (approx.) 1- Piece 45° Ell, 17 in. dia. (approx.).
CLAWSON TANK COMPANY INTERMEDIATE BULK CONTAINER TOTE
Specification DOT 57 12093 B 8, (Original Test 1/23/1993) 275 gal. capacity, 316 Stainless Steel, having a 21 in. dia. Top Mounted Protection Ring for 5- Ports, 1- 4 in., 2-3 in. 1- 2-1/2 in., and 1-1/4 in. Outlets.
MISCELLANEOUS SHOP SUPPORT ITEMS
COATS TIRE CHANGE MACHINE 40-40A 07855, With Air Receiver Tank and Cylinder; OLYMPIA MULTIPURPOSE VISE, 5 in., Pedestal Mounted on a 20 in. Truck Rim.
CONCRETE / MORTAR MIXER, PORTABLE
3-6 cu. ft. capacity (est.) powered by BRIGGS & STRATTON, 1- Cylinder Air Cooled Gasoline Engine, mounted on Single Axle having 4.00-12 Pneumatic Tires, Pin Type Trailer Towing Hitch.
METAL MAINTENANCE PLATFORM, PERSONNEL
46 in. high x 6ft. 8 in. wide (approx.) OD, with Safety Rails on 3- Sides.
LOT SCALE & CARBOON STEEL SECTIONS
FAIRBANKS MORSE PLATFORM BALANCE BEAM SCALES, (NOTE: Base of Scales is Cracked/Broken, Inoperable.) 1- Scale Platform Protection Plate with Headache Rack Backboard, Cast Carbon Steel. (NOTE: for Salvage Only). 3- PIECES CARBON STEEL PAN SECTIONS, ROLLED, Each Piece is 48 in. wide x 8 ft. long x 1/4 in long (approx.) Rolled Trough Pan/Dome having a 2 in. Lip.
2 PIECES PIPE MANIFOLDS
Carbon Steel, consisting of but not necessarily limited to: 1- Joint of 6-1/2 in. OD x 39 in. long (approx.) Pipe having 2- 4 in. Steel Ball Valves, Flanged, Each having a EL-O-MATIC Air Actuated Remote Valve Unit, and 2- Eccentric Swedged Reducers.
LOT 2 CONVEYORS
CONVEYOR, FLAT BELT, POWERED, 12 ft. long x 14 in. wide powered by BALDOR Electric Motor driving through a Right Angle Reduction Gearbox, Mounted on Adjustable Height Legs. CONVEYOR, FLAT BELT, POWERED, 18 ft. 8 in. long x 18 in. wide powered by Electric Motor, driving through a Reduction Gear Box. (NOTE: The Frame of this Unit is Broken/Bent, thus is not Serviceable.)
