"Model HGM 100L 1306 1001 (Mfg. Date 6/2013). Purchased New in 2013 for $231,674. Consisting of: 2- HGA SERIES ULTRA FINE GRINDING MILLS/CLASSIFIERS MODEL 100L: Mill #1 S/N 1306 1001 (Mfg. Date 6/2013) Main Unit Power: 132 kW, Classifier Power: 30 kW, Output Size: 300 – 2500 Mesh, Main Shaft Speed: 190 r/min, Capacity: 0.5 to 4.5 tons/hr., Main Unit Weight: 9600 kg / 4355 lbs. Each Mounted on a 7 ft. x 7 ft. (approx.) Fabricated Steel Base, housed in a 8 ft. 3 in. high x 10 ft. 5 in. wide x 10 ft. 5 in. deep, Enclosed Top and Open Bottom, Sound Suppressed House/Enclosure, having 5 in. thick Waffled Foam Fitted Walls with 2 in. x 2 in. Wire Retaining Mesh, Metal Clad Exterior Wall, powered by ECHTOP Model GR3-CI-TF-449T-6-RR-E-200, 200 hp Electric Motor, 460 v, 1190 rpm, driving through a Right Angle Drive, Bottom Positioned Reduction Gearbox. Mill #2 S/N 1306 1002 (Mfg. Date 6/2013) Main Unit Power: 132 kW, Classifier Power: 30 kW, Output Size: 300 – 2500 Mesh, Main Shaft Speed: 190 r/min, Capacity: 0.5 to 4.5 tons/hr., Main Unit Weight: 9600 kg / 4355 lbs. Mounted on a 7 ft. x 7 ft. (approx.) Fabricated Steel Base, housed in a 8 ft. 3 in. high x 10 ft. 5 in. wide x 10 ft. 5 in. deep, Enclosed Top and Open Bottom, Sound Suppressed House/Enclosure, having 5 in. thick Waffled Foam Fitted Walls with 2 in. x 2 in. Wire Retaining Mesh, Metal Clad Exterior Wall, powered by ECHTOP Model GR3-CI-TF-449T-6-RR-E-200, 200 hp Electric Motor, 460 v, 1190 rpm, driving through a Right Angle Drive, Bottom Positioned Reduction Gearbox. With 2- AUTOMATIC ELECTRIC CONTROL SYSTEMS ELECTRICAL CONTROL CABINETS: Each are Free Standing 7 ft. high x 46 in. wide x 25 in. deep (approx.) having Double Hinged Front Doors, Floor Mounted, Each Equipped with SHANGHAI CLIRIK HMI with Vibrating Feeder Amp Meter, Amplitude Adjusting, Main Unit Current and Blower Current Setting Knobs, Manual/Automatic Mode Switch and Others, Variable Frequency Drive HMI. 2- DELTA VARIABLE FREQUENCY DRIVE UNITS Series CP2000, Model VFD370CP43A-21; With 5- CHNT Model NMI-630S/3300, 800v, 8KV Circuit Breakers; with 1- DELTA CP200 Model N/A, Variable Frequency Drive with additional Switch Gear. Including Transformer, 4- Instruments /Gauges, 2- HMI Interface Units, 10-Circuit Indicator Lights, Emergency Stop Switch. (NOTE: Units are adjacent and joined appearing as 1 Unit.) With SHANGHAI CLIRIK MACHINERY CO., LTD. BAG HOUSE FABRICATED, CARBON STEEL: Duct size: f 500 mm, Wind Capacity: 18600m3/h, Wind Pressure: 8600 Pascal, Motor Power: 75kw, Speed: 2900 rpm; Bag Numbers: 250, Size(mm):150 x 2000, Air Volume(m3): 16,560 – 27,600, Pulse Pressure(MPa/min): 1.2 - 2.0, Efficiency: 99.50%, Air compressed volume is 05~0.7 m3/min. Having Pulse Jet Air System, Electromagnetic Actuated Pulse Valves, Carbon Steel Hopper having 8 ft. (approx.) Straight-Wall-Height x 20 ft. 6 in. long x 7 ft. 7 in. wide (approx.) having 8 ft. high (approx.) 60° (approx.) V-Type Hopper Bottom mounted on 17 ft. high x 10-3/4 in x 10-3/4 in. Pressed, Formed, Angle Iron Legs, With Bag Cages having 250- 6 in. dia. x 78-3/4 in. long (approx.) Fabric Dust Bags; with a 6 in. dia. x 27 ft. long (approx.) Single Screw Type Discharge Auger powered by In-line Electric Motor driving through a Reduction Gearbox, Twin 24 in. dia. x 4 ft. high (approx.) Cyclone Particle Separator with Discharge Transitions into a Bottom Mounted Feed Hopper. With INDUSTRIAL FAN: 36 in dia. x 12 in. wide (approx.) Duct Size: 500 mm Wind Capacity: 18,600 m³/hour Wind Pressure: 8600 Pascal, with HBWSY Jack Shaft and Bearing Housing Assembly, Carbon Steel, Cast and Machined, powered by TECHTOPIND MOTORS Model GR3-CI-TF-405TS-2-BR-D-100 Electric Motor, 100 hp, 230/460 v, 3570 rpm, S/N 09132599 (Mfg. Date 120202), Mounted and Unitized on a 4 ft. x 6 ft. Fabricated Channel Steel Base. With CONVEYOR, TUBULAR, SCREW TYPE: 8-1/2 in dia. x 27 ft. long (approx.) having 1- each Angled Intake and Discharge Ports, powered by GUOMAO Model BLD3-11-5.5 Close Coupled, In-line Electric Motor driving through Reduction Gearbox S/N D1303215. With LOT DUCTWORK, PIPING AND FITTINGS: Consisting of but not necessarily limited to: 2- 45° Ells, 19-1/2 in. ID (approx.); 1- Nipple, 19-1/2 in. ID x 29 in. long (approx.); 2- Flanges, Bolted, 19-1/2 in. ID (approx.); 1- Joint Ducting, 7 in. dia. x 21 in. long (approx.); 2- Joints Piping 19-1/2 in. dia. x 90 in. long (approx.) with Flanged End Fittings; 1- 90° Ell, 19-1/2 in. dia. (approx.); 1- 45° Ell, 19-1/2 in. dia. (approx.) (NOTE: 2- Joints are fitted with a 19 in. Butterfly Damper having an Air Activated Remote Activation Cylinder; 1- is Detached.); 19-1/2 in. dia. x 8 ft. long (approx.) having a 45° Y-Type Fitting. With HOPPER, CARBON STEEL: 6 ft. high x 8 ft. long x 5 ft. wide (approx.) having 2- Pyramid Hopper Bottoms, Each off-set to the Outside, Fully Enclosed Top. For complete description, visit maascompanies.com...more

Model/Series PDC-4-300-300-H-2 S/N: 3LHA-067 (Job 1990-0513 2013) NEW/UNUSED (Original Purchase Price $109,480.) 2- Cylinder Horizontal Opposed Compressor, powered by HYUNDAI Crown Triton 15 hp, 230 v, 60 Hz, 1775 rpm Electric Motor, mounted in Fabricated Metal Frame 5 ft. 8 in. x 44 in. deep x 7 ft. long (approx.) OD, having an I-Beam Base. (NOTE: Most Piping and Valves are Stainless Steel.) Single Stage, Horizontally Opposed Frame Configuration; Inlet MWAP: 90 psig, Max Inlet Temperature: 140° F, MAWP Discharge: 330 psig, Normal Running Parameters: Inlet pressure 40 psig, Capacity 40 SCFM. With Electrical Control Panel, Group A, B, C, D, Type 4, Class 1, Div. 2, 13- (total) Run, Stop, and Standby Button Switches having Integral Indicator Lights, 3- (total) Start, Stop & Jog Button Switches and 1- Emergency Stop Switch....more

Having Manifold with 2- SIEMENS Model SKP 25.-13U1 Module; 1- SIEMENS Model SQM 45295A9 Module; 1- AMERICAN CUMBUSTION TECHNOLOGIES, INC. Electrical Control Panel S/N 00416; Blower is powered by TECO WESTINGHOUSE MAX PE Premium, Type AEHH8P, Electric Motor, Catalog No. NP0052, rpm 3480, 230/460 v AC, S/N UYP 3137345008. For use in Class 1 Div. 2 GRP. A, B, C, D; Temperature Code: T4; Rating: 110-130 VAC; 1 phase, 50-60 Hz; 1 FLA Enclosure: Type 4....more

Burner Model Number: ACTO 5SLE Burner S/N 00157 Input: 8 400,000 BTU/hr, Type: Gas having 7-1/2 hp BALDOR 3450 rpm & 2 hp BALDOR 3450 rpm Electric Motors, Supply Voltages: 460 VAC, Amp: 30, Cont. Voltage 120, Amp 30....more

SELF-CLEANING / AUTO DE-SLUDGING Type WHPX513 60 Hz S/N 4097029 (Mfg. Date 1998) (NOTE: This is the serial number of the Bowl.) 40 gpm Capacity (approx.), Worm Wheel Shaft 1700-1800 r/m, Motor 460 v 3 ph., 142-150 r/m, powered by ASEA M-160-M 440 v/22 amp, 3 ph., 60 hz, 11.5 Kw, 1750 rpm, No. 7030-079; with 3 ft. x 4 ft. x 15 in. deep (approx.) Stainless Steel Electrical Control Panel consisting of but not necessarily limited to: 2- Meters, SCHNEIDER ELECTRIC, Magelis Digital Read-Out Meter, 20- Push-to-Start / Push to Stop with Lighted Circuit Status Buttons and Diagram with Indicator Lights, with 3- 1/2 in. dia. (approx.) Piping Manifold with Valves and Clear View Sight Gauge, powered by LEESON Electric Motor, Model C6T17FK76C, 2 hp, 1740 rpm, 206/230/460 v, 60 hp, All Unitized and Mounted on Fabricated Channel Steel Square (approx.) Base....more

Model TL10-PFG S/N 30113-96127 (Mfg. Date 2012) Area 129.2 sq. ft. (approx.), A.D.M. 92 mm, 26- 0.50 mm PLT, MDMT with 20° F @ 150 psi, MAWP- 150 psi @ 200° F, P.O. No. RTC-63542, with 2- 2 in. (est.) Plugs and 2- 2 in. (est. Ball Valves, Carbon Steel, Flanged, fully enclosed by a Custom Fitted Insulation Blanket, mounted on a 32 in. high x 60 in. long (est.) H-Beam Fabricated Aluminum Stand with Insulating Heavy Duty Blanket; 78 in. x 19 in. x 60 in. (approx.)....more

Type JKF-86CH, Model PT650D NEW/UNUSED. Valve Type, Variable Speed Taper Screw, Automatic Electronic Weighing and PLC Controls; Having a Stainless Steel Single Auger Feeder; Stainless Steel Bagging Feeder Unit, Bag Weight 2.2 to 132 lbs. (1-60 kg), Filling Speed 2-5 Bags/min, Single Auger, Bag Rest Platform mounted on Cast Steel Base with Electrical Control Cabinet containing Frequency Inverter; 3- JINLDA Model DIZ 47-63 Module; 2- DELTA VFD-EL Variable Frequency Drive Control Module; PT650D Digital Weight Monitor, SLJD Digital Control Panel. (NOTE: No Electric Motor is Installed.) This item was purchased with Lot 10....more

Type JKF-86CH, Model PT650D NEW/UNUSED. Valve Type, Variable Speed Taper Screw, Automatic Electronic Weighing and PLC Controls; Having a Stainless Steel Single Auger Feeder; Stainless Steel Bagging Feeder Unit, Single Auger, Bag Rest Platform mounted on Cast Steel Base with Electrical Control Cabinet containing Frequency Inverter; 3- JINLDA Model DIZ 47-63 Module; 2- DELTA VFD-EL Variable Frequency Drive Control Module; PT650D Digital Weight Monitor, SLJD Digital Control Panel. (NOTE: No Electric Motor is Installed.) This item was purchased with lot 10....more

Series CXJ II CXJ-100-2 Dry Roller 1-Drum Separator, Electro-Magnetic Vibration Feeder Hopper, Carbon Steel, 12 ft. high x 5 ft. wide x 8 ft. long (approx.) OAD having 2- 20 in. dia. x 39 in. long (approx.) Rotating Drums, each with a Magnet, Magnetic Intensity 300-8000 Gs, 5- tons/hr. nominal output capacity, each Drum having Reduction Gearbox and V- Belt Power Transmission. (NOTE: No Electric Motor is installed.)...more

1,000 gal. capacity (approx.), 6 ft. high x 40 in. wide x 8 ft. long (approx.); with 2- TEMPCO 60° to 250° F. Thermostats; 3- 3 in. Ball Valves, Brass; 1- 2-1/2 in. Ball Valve, Brass; 2- KENCO 1/2 in. Valve; 2- MIDCO 1/2 in. Ball Valve, mounted on Fabricated I-Beam Base....more

Carbon Steel and Refractory Concrete, 31 in. high x 10 ft. 1 in. long x 75 in. wide (approx.) Flanged Top Cover, Tank Internally Lined, Interior Side and End Walls are lined with Layers of MORGAN THERMAL CERAMICS 2 in. Super Wool Insulation and RENO REFRACTORIES, INC. Reno Cast30 Refractory. (NOTE: There appears to be a 70 in. dia. (approx.) Hole cut into the Top at One End.)...more

30 in. wide x 25 ft. long (approx.) having Troughing Rollers, Fluted Tail Roller Stock, having 10 in. high Channel Steel Side Rail Frame. (NOTE: No Motor is Installed.)...more

21 ft. 4 in. long x 24 in. wide Heavy Duty with Troughing Rollers, Side Wall Side Boards with Arched Full Length Flat Top Cover with 8- Hinged Inspection Covers 4- on Each Side constructed of 12 in. x 3 in. Channel Steel Frame powered by WEG W22 Model 00518ET3E184T-W22, 3 hp, 230/460, 60 Hz, (Mfg. Date 1/16/2012) 1,765 rpm CLEVELAND Type CGSM, 15:1 Ratio, driving through Reduction Gearbox S/N 110108....more

27 in. high x 66 in wide x 66 in. deep, Double Walled Enclosed Top having an 18 in. dia. Hole, Full Open Bottom, Galvanized, Crimp Wall Side Panel Construction....more

7 ft. 6 in. high x 83 in. wide x 83 in deep (approx.) OAD, having 12 in. x 12 in. (approx.) Flanged Rear Discharge Port, Fully Enclosed Top with 12 in. x 12 in. (approx.) Flanged Top Intake Port....more

Consisting of but not necessarily limited to: 6- Sections of 13 in. dia. U-Trough, 2- are 24 ft. long (1- has a Bottom Discharge Port), 3- are 12 ft. long, 1- is 15 ft. 4 in. long with 1- Screw Auger Section and Motor Mounting Pad.(NOTE: No Motor nor Reduction Gearbox is Mounted.); 6- Sections of Screw Auger, 4- are 12 ft. long, 1- is 10 ft. long, and 1- is 6 ft. long (approx.)....more

HCP-48128-1 (Mfg. Date 2014); RCP-12156-2 RCP-001 (Mfg. Date 2014); RCP-12156-3 RCP-001 (Mfg. Date 2014) ASME, MAWP 500 psi @ 1000° F, MAWP Ext. AM, MDMP -20 F° @ 500 psi (approx.) Drawing 1455-8HCP-001 Hydro Stop 650 psi with 1/2 in. dia. Reactor 12 in. OD x 13 ft. long Support Plate (approx.). (3rd Unit was ordered as a spare.) With 2- Insulated Structural Steel Support Stands....more

2- Joints consisting of but not necessarily limited to: 1- 24 in OD x 90 in. long (approx.) Each End having a Bolted Flange Fitting. 1- 18 in. OD x 90 In. long (approx.) Each End having a Bolted Flange Fitting; 4- Joints each are 24 in. x 8 ft. long (approx.) having Bolted, Flanged End Fittings; 2- 11 in. OD (approx.) Side Mounted Parts, 1- at Top and 1- at Bottom, Both are Flanged, 1- is equipped with a Blind Flange; 1-with a 3 in. Flanged Port....more

Consisting of 4- Joints total, Stainless Steel, 18 in. dia.: 2- Joints 8 ft. long (approx.) 2- Joints 5 ft. 1 in. long (approx.), 1- Piece 45° Ell....more

33 in. OD x 9 ft. tall (approx.) Stainless Steel, having Cone Type Tops and Bottoms, 1- Side Positioned forced Air Intake....more

33 in. OD x 9 ft. tall (approx.) Stainless Steel, having Cone Type Tops and Bottoms, 1- Side Positioned Forced Air Intake. (NOTE - Appears to be Damaged. Apparently in Transit Unit has experienced elevated heat that has resulted in Deforming and Discoloration of the Metal in Several Places.)...more

6 ft. 4 in. long x 4 ft. 8 in. Deck, having Infeed Hopper/Bin and with Discharge Funnel, mounted on 4- Square Tubing Legs 10 ft. high (approx.), powered by Electric Motor driving through a Reduction Gear Box, (NOTE: Motor may be Inoperable. Some of the Cooling Fan Blades are broken, The Motor Cooling Fan Protective Cap is Removed and Missing)....more

Having 2- 20 in. dia. x 6- Segment Major Rolls, 4- 6 in dia. Chevroned Rolls (divided 2- Each per Major Roll) mounted in a 3 in. Square Tubing Frame....more

Consisting of 3- Tanks, Vertically Stacked, Each 2 ft. Straight-Wall Height x 3 ft. x 3 ft. (approx.) with Inverted Pyramid Hopper Bottom; 2- Tanks are stacked vertically and insulated with 2 in. of Material having a Metal Cladding Exterior Cover, 1- Tank is offset to the side and un-insulated, Unitized and Mounted on a Fabricated Metal Frame....more

28-1/2 in. high x 36 in. wide x 66 in. long (approx.), Fabricated Carbon Steel, having 2- 18 in. (approx.) dia. Flanged Top Opening Ports, 1- 14 in. (approx.) dia. Flanged, Bolted, Clean-Out Hatch, 2-2-1/2 in. dia. (approx.) End-Positioned Discharge Ports, Each having a Plug Fitting, 1- Bottom-Mounted Discharge Port having a 2 in. Brass Ball Valve; Modified, Inverted Pyramid Hopper Bottom mounted on 4- 30 in. high (approx.) Angle Iron Legs. (NOTE: Appears to be NEW/UNUSED.)...more