"Model HGM 100L 1306 1001 (Mfg. Date 6/2013). Purchased New in 2013 for $231,674. Consisting of: 2- HGA SERIES ULTRA FINE GRINDING MILLS/CLASSIFIERS MODEL 100L: Mill #1 S/N 1306 1001 (Mfg. Date 6/2013) Main Unit Power: 132 kW, Classifier Power: 30 kW, Output Size: 300 – 2500 Mesh, Main Shaft Speed: 190 r/min, Capacity: 0.5 to 4.5 tons/hr., Main Unit Weight: 9600 kg / 4355 lbs. Each Mounted on a 7 ft. x 7 ft. (approx.) Fabricated Steel Base, housed in a 8 ft. 3 in. high x 10 ft. 5 in. wide x 10 ft. 5 in. deep, Enclosed Top and Open Bottom, Sound Suppressed House/Enclosure, having 5 in. thick Waffled Foam Fitted Walls with 2 in. x 2 in. Wire Retaining Mesh, Metal Clad Exterior Wall, powered by ECHTOP Model GR3-CI-TF-449T-6-RR-E-200, 200 hp Electric Motor, 460 v, 1190 rpm, driving through a Right Angle Drive, Bottom Positioned Reduction Gearbox. Mill #2 S/N 1306 1002 (Mfg. Date 6/2013) Main Unit Power: 132 kW, Classifier Power: 30 kW, Output Size: 300 – 2500 Mesh, Main Shaft Speed: 190 r/min, Capacity: 0.5 to 4.5 tons/hr., Main Unit Weight: 9600 kg / 4355 lbs. Mounted on a 7 ft. x 7 ft. (approx.) Fabricated Steel Base, housed in a 8 ft. 3 in. high x 10 ft. 5 in. wide x 10 ft. 5 in. deep, Enclosed Top and Open Bottom, Sound Suppressed House/Enclosure, having 5 in. thick Waffled Foam Fitted Walls with 2 in. x 2 in. Wire Retaining Mesh, Metal Clad Exterior Wall, powered by ECHTOP Model GR3-CI-TF-449T-6-RR-E-200, 200 hp Electric Motor, 460 v, 1190 rpm, driving through a Right Angle Drive, Bottom Positioned Reduction Gearbox. With 2- AUTOMATIC ELECTRIC CONTROL SYSTEMS ELECTRICAL CONTROL CABINETS: Each are Free Standing 7 ft. high x 46 in. wide x 25 in. deep (approx.) having Double Hinged Front Doors, Floor Mounted, Each Equipped with SHANGHAI CLIRIK HMI with Vibrating Feeder Amp Meter, Amplitude Adjusting, Main Unit Current and Blower Current Setting Knobs, Manual/Automatic Mode Switch and Others, Variable Frequency Drive HMI. 2- DELTA VARIABLE FREQUENCY DRIVE UNITS Series CP2000, Model VFD370CP43A-21; With 5- CHNT Model NMI-630S/3300, 800v, 8KV Circuit Breakers; with 1- DELTA CP200 Model N/A, Variable Frequency Drive with additional Switch Gear. Including Transformer, 4- Instruments /Gauges, 2- HMI Interface Units, 10-Circuit Indicator Lights, Emergency Stop Switch. (NOTE: Units are adjacent and joined appearing as 1 Unit.) With SHANGHAI CLIRIK MACHINERY CO., LTD. BAG HOUSE FABRICATED, CARBON STEEL: Duct size: f 500 mm, Wind Capacity: 18600m3/h, Wind Pressure: 8600 Pascal, Motor Power: 75kw, Speed: 2900 rpm; Bag Numbers: 250, Size(mm):150 x 2000, Air Volume(m3): 16,560 – 27,600, Pulse Pressure(MPa/min): 1.2 - 2.0, Efficiency: 99.50%, Air compressed volume is 05~0.7 m3/min. Having Pulse Jet Air System, Electromagnetic Actuated Pulse Valves, Carbon Steel Hopper having 8 ft. (approx.) Straight-Wall-Height x 20 ft. 6 in. long x 7 ft. 7 in. wide (approx.) having 8 ft. high (approx.) 60° (approx.) V-Type Hopper Bottom mounted on 17 ft. high x 10-3/4 in x 10-3/4 in. Pressed, Formed, Angle Iron Legs, With Bag Cages having 250- 6 in. dia. x 78-3/4 in. long (approx.) Fabric Dust Bags; with a 6 in. dia. x 27 ft. long (approx.) Single Screw Type Discharge Auger powered by In-line Electric Motor driving through a Reduction Gearbox, Twin 24 in. dia. x 4 ft. high (approx.) Cyclone Particle Separator with Discharge Transitions into a Bottom Mounted Feed Hopper. With INDUSTRIAL FAN: 36 in dia. x 12 in. wide (approx.) Duct Size: 500 mm Wind Capacity: 18,600 m³/hour Wind Pressure: 8600 Pascal, with HBWSY Jack Shaft and Bearing Housing Assembly, Carbon Steel, Cast and Machined, powered by TECHTOPIND MOTORS Model GR3-CI-TF-405TS-2-BR-D-100 Electric Motor, 100 hp, 230/460 v, 3570 rpm, S/N 09132599 (Mfg. Date 120202), Mounted and Unitized on a 4 ft. x 6 ft. Fabricated Channel Steel Base. With CONVEYOR, TUBULAR, SCREW TYPE: 8-1/2 in dia. x 27 ft. long (approx.) having 1- each Angled Intake and Discharge Ports, powered by GUOMAO Model BLD3-11-5.5 Close Coupled, In-line Electric Motor driving through Reduction Gearbox S/N D1303215. With LOT DUCTWORK, PIPING AND FITTINGS: Consisting of but not necessarily limited to: 2- 45° Ells, 19-1/2 in. ID (approx.); 1- Nipple, 19-1/2 in. ID x 29 in. long (approx.); 2- Flanges, Bolted, 19-1/2 in. ID (approx.); 1- Joint Ducting, 7 in. dia. x 21 in. long (approx.); 2- Joints Piping 19-1/2 in. dia. x 90 in. long (approx.) with Flanged End Fittings; 1- 90° Ell, 19-1/2 in. dia. (approx.); 1- 45° Ell, 19-1/2 in. dia. (approx.) (NOTE: 2- Joints are fitted with a 19 in. Butterfly Damper having an Air Activated Remote Activation Cylinder; 1- is Detached.); 19-1/2 in. dia. x 8 ft. long (approx.) having a 45° Y-Type Fitting. With HOPPER, CARBON STEEL: 6 ft. high x 8 ft. long x 5 ft. wide (approx.) having 2- Pyramid Hopper Bottoms, Each off-set to the Outside, Fully Enclosed Top. For complete description, visit maascompanies.com

Model/Series PDC-4-300-300-H-2 S/N: 3LHA-067 (Job 1990-0513 2013) NEW/UNUSED (Original Purchase Price $109,480.) 2- Cylinder Horizontal Opposed Compressor, powered by HYUNDAI Crown Triton 15 hp, 230 v, 60 Hz, 1775 rpm Electric Motor, mounted in Fabricated Metal Frame 5 ft. 8 in. x 44 in. deep x 7 ft. long (approx.) OD, having an I-Beam Base. (NOTE: Most Piping and Valves are Stainless Steel.) Single Stage, Horizontally Opposed Frame Configuration; Inlet MWAP: 90 psig, Max Inlet Temperature: 140° F, MAWP Discharge: 330 psig, Normal Running Parameters: Inlet pressure 40 psig, Capacity 40 SCFM. With Electrical Control Panel, Group A, B, C, D, Type 4, Class 1, Div. 2, 13- (total) Run, Stop, and Standby Button Switches having Integral Indicator Lights, 3- (total) Start, Stop & Jog Button Switches and 1- Emergency Stop Switch.

Having Manifold with 2- SIEMENS Model SKP 25.-13U1 Module; 1- SIEMENS Model SQM 45295A9 Module; 1- AMERICAN CUMBUSTION TECHNOLOGIES, INC. Electrical Control Panel S/N 00416; Blower is powered by TECO WESTINGHOUSE MAX PE Premium, Type AEHH8P, Electric Motor, Catalog No. NP0052, rpm 3480, 230/460 v AC, S/N UYP 3137345008. For use in Class 1 Div. 2 GRP. A, B, C, D; Temperature Code: T4; Rating: 110-130 VAC; 1 phase, 50-60 Hz; 1 FLA Enclosure: Type 4.

Burner Model Number: ACTO 5SLE Burner S/N 00157 Input: 8 400,000 BTU/hr, Type: Gas having 7-1/2 hp BALDOR 3450 rpm & 2 hp BALDOR 3450 rpm Electric Motors, Supply Voltages: 460 VAC, Amp: 30, Cont. Voltage 120, Amp 30.

SELF-CLEANING / AUTO DE-SLUDGING Type WHPX513 60 Hz S/N 4097029 (Mfg. Date 1998) (NOTE: This is the serial number of the Bowl.) 40 gpm Capacity (approx.), Worm Wheel Shaft 1700-1800 r/m, Motor 460 v 3 ph., 142-150 r/m, powered by ASEA M-160-M 440 v/22 amp, 3 ph., 60 hz, 11.5 Kw, 1750 rpm, No. 7030-079; with 3 ft. x 4 ft. x 15 in. deep (approx.) Stainless Steel Electrical Control Panel consisting of but not necessarily limited to: 2- Meters, SCHNEIDER ELECTRIC, Magelis Digital Read-Out Meter, 20- Push-to-Start / Push to Stop with Lighted Circuit Status Buttons and Diagram with Indicator Lights, with 3- 1/2 in. dia. (approx.) Piping Manifold with Valves and Clear View Sight Gauge, powered by LEESON Electric Motor, Model C6T17FK76C, 2 hp, 1740 rpm, 206/230/460 v, 60 hp, All Unitized and Mounted on Fabricated Channel Steel Square (approx.) Base.

Model TL10-PFG S/N 30113-96127 (Mfg. Date 2012) Area 129.2 sq. ft. (approx.), A.D.M. 92 mm, 26- 0.50 mm PLT, MDMT with 20° F @ 150 psi, MAWP- 150 psi @ 200° F, P.O. No. RTC-63542, with 2- 2 in. (est.) Plugs and 2- 2 in. (est. Ball Valves, Carbon Steel, Flanged, fully enclosed by a Custom Fitted Insulation Blanket, mounted on a 32 in. high x 60 in. long (est.) H-Beam Fabricated Aluminum Stand with Insulating Heavy Duty Blanket; 78 in. x 19 in. x 60 in. (approx.).

Type JKF-86CH, Model PT650D NEW/UNUSED. Valve Type, Variable Speed Taper Screw, Automatic Electronic Weighing and PLC Controls; Having a Stainless Steel Single Auger Feeder; Stainless Steel Bagging Feeder Unit, Bag Weight 2.2 to 132 lbs. (1-60 kg), Filling Speed 2-5 Bags/min, Single Auger, Bag Rest Platform mounted on Cast Steel Base with Electrical Control Cabinet containing Frequency Inverter; 3- JINLDA Model DIZ 47-63 Module; 2- DELTA VFD-EL Variable Frequency Drive Control Module; PT650D Digital Weight Monitor, SLJD Digital Control Panel. (NOTE: No Electric Motor is Installed.) This item was purchased with Lot 10.

Type JKF-86CH, Model PT650D NEW/UNUSED. Valve Type, Variable Speed Taper Screw, Automatic Electronic Weighing and PLC Controls; Having a Stainless Steel Single Auger Feeder; Stainless Steel Bagging Feeder Unit, Single Auger, Bag Rest Platform mounted on Cast Steel Base with Electrical Control Cabinet containing Frequency Inverter; 3- JINLDA Model DIZ 47-63 Module; 2- DELTA VFD-EL Variable Frequency Drive Control Module; PT650D Digital Weight Monitor, SLJD Digital Control Panel. (NOTE: No Electric Motor is Installed.) This item was purchased with lot 10.

Series CXJ II CXJ-100-2 Dry Roller 1-Drum Separator, Electro-Magnetic Vibration Feeder Hopper, Carbon Steel, 12 ft. high x 5 ft. wide x 8 ft. long (approx.) OAD having 2- 20 in. dia. x 39 in. long (approx.) Rotating Drums, each with a Magnet, Magnetic Intensity 300-8000 Gs, 5- tons/hr. nominal output capacity, each Drum having Reduction Gearbox and V- Belt Power Transmission. (NOTE: No Electric Motor is installed.)

1,000 gal. capacity (approx.), 6 ft. high x 40 in. wide x 8 ft. long (approx.); with 2- TEMPCO 60° to 250° F. Thermostats; 3- 3 in. Ball Valves, Brass; 1- 2-1/2 in. Ball Valve, Brass; 2- KENCO 1/2 in. Valve; 2- MIDCO 1/2 in. Ball Valve, mounted on Fabricated I-Beam Base.

Carbon Steel and Refractory Concrete, 31 in. high x 10 ft. 1 in. long x 75 in. wide (approx.) Flanged Top Cover, Tank Internally Lined, Interior Side and End Walls are lined with Layers of MORGAN THERMAL CERAMICS 2 in. Super Wool Insulation and RENO REFRACTORIES, INC. Reno Cast30 Refractory. (NOTE: There appears to be a 70 in. dia. (approx.) Hole cut into the Top at One End.)

30 in. wide x 25 ft. long (approx.) having Troughing Rollers, Fluted Tail Roller Stock, having 10 in. high Channel Steel Side Rail Frame. (NOTE: No Motor is Installed.)

21 ft. 4 in. long x 24 in. wide Heavy Duty with Troughing Rollers, Side Wall Side Boards with Arched Full Length Flat Top Cover with 8- Hinged Inspection Covers 4- on Each Side constructed of 12 in. x 3 in. Channel Steel Frame powered by WEG W22 Model 00518ET3E184T-W22, 3 hp, 230/460, 60 Hz, (Mfg. Date 1/16/2012) 1,765 rpm CLEVELAND Type CGSM, 15:1 Ratio, driving through Reduction Gearbox S/N 110108.

27 in. high x 66 in wide x 66 in. deep, Double Walled Enclosed Top having an 18 in. dia. Hole, Full Open Bottom, Galvanized, Crimp Wall Side Panel Construction.

7 ft. 6 in. high x 83 in. wide x 83 in deep (approx.) OAD, having 12 in. x 12 in. (approx.) Flanged Rear Discharge Port, Fully Enclosed Top with 12 in. x 12 in. (approx.) Flanged Top Intake Port.

Consisting of but not necessarily limited to: 6- Sections of 13 in. dia. U-Trough, 2- are 24 ft. long (1- has a Bottom Discharge Port), 3- are 12 ft. long, 1- is 15 ft. 4 in. long with 1- Screw Auger Section and Motor Mounting Pad.(NOTE: No Motor nor Reduction Gearbox is Mounted.); 6- Sections of Screw Auger, 4- are 12 ft. long, 1- is 10 ft. long, and 1- is 6 ft. long (approx.).

HCP-48128-1 (Mfg. Date 2014); RCP-12156-2 RCP-001 (Mfg. Date 2014); RCP-12156-3 RCP-001 (Mfg. Date 2014) ASME, MAWP 500 psi @ 1000° F, MAWP Ext. AM, MDMP -20 F° @ 500 psi (approx.) Drawing 1455-8HCP-001 Hydro Stop 650 psi with 1/2 in. dia. Reactor 12 in. OD x 13 ft. long Support Plate (approx.). (3rd Unit was ordered as a spare.) With 2- Insulated Structural Steel Support Stands.

2- Joints consisting of but not necessarily limited to: 1- 24 in OD x 90 in. long (approx.) Each End having a Bolted Flange Fitting. 1- 18 in. OD x 90 In. long (approx.) Each End having a Bolted Flange Fitting; 4- Joints each are 24 in. x 8 ft. long (approx.) having Bolted, Flanged End Fittings; 2- 11 in. OD (approx.) Side Mounted Parts, 1- at Top and 1- at Bottom, Both are Flanged, 1- is equipped with a Blind Flange; 1-with a 3 in. Flanged Port.

Consisting of 4- Joints total, Stainless Steel, 18 in. dia.: 2- Joints 8 ft. long (approx.) 2- Joints 5 ft. 1 in. long (approx.), 1- Piece 45° Ell.

33 in. OD x 9 ft. tall (approx.) Stainless Steel, having Cone Type Tops and Bottoms, 1- Side Positioned forced Air Intake.

33 in. OD x 9 ft. tall (approx.) Stainless Steel, having Cone Type Tops and Bottoms, 1- Side Positioned Forced Air Intake. (NOTE - Appears to be Damaged. Apparently in Transit Unit has experienced elevated heat that has resulted in Deforming and Discoloration of the Metal in Several Places.)

6 ft. 4 in. long x 4 ft. 8 in. Deck, having Infeed Hopper/Bin and with Discharge Funnel, mounted on 4- Square Tubing Legs 10 ft. high (approx.), powered by Electric Motor driving through a Reduction Gear Box, (NOTE: Motor may be Inoperable. Some of the Cooling Fan Blades are broken, The Motor Cooling Fan Protective Cap is Removed and Missing).

Having 2- 20 in. dia. x 6- Segment Major Rolls, 4- 6 in dia. Chevroned Rolls (divided 2- Each per Major Roll) mounted in a 3 in. Square Tubing Frame.

Consisting of 3- Tanks, Vertically Stacked, Each 2 ft. Straight-Wall Height x 3 ft. x 3 ft. (approx.) with Inverted Pyramid Hopper Bottom; 2- Tanks are stacked vertically and insulated with 2 in. of Material having a Metal Cladding Exterior Cover, 1- Tank is offset to the side and un-insulated, Unitized and Mounted on a Fabricated Metal Frame.

28-1/2 in. high x 36 in. wide x 66 in. long (approx.), Fabricated Carbon Steel, having 2- 18 in. (approx.) dia. Flanged Top Opening Ports, 1- 14 in. (approx.) dia. Flanged, Bolted, Clean-Out Hatch, 2-2-1/2 in. dia. (approx.) End-Positioned Discharge Ports, Each having a Plug Fitting, 1- Bottom-Mounted Discharge Port having a 2 in. Brass Ball Valve; Modified, Inverted Pyramid Hopper Bottom mounted on 4- 30 in. high (approx.) Angle Iron Legs. (NOTE: Appears to be NEW/UNUSED.)

Consisting of: 1- BUYERS PRODUCT COMPANY Hydraulic Oil Tank, 20 in. x 20 in. x 15 in. (approx.) with Sight Fluid Temperature Gauge, powered by TECO WESTINGHOUSE 10 hp Electric 1755 rpm Motor having a PRINCE Close, SP25A38A9H2-R (Mfg. Date 6/5/2013), Coupled Direct Mounted Hydraulic Pump with DODGE Coupling Unitized and Mounted on a 3 ft. x 4 ft. Fabricated Channel Steel Base. (NOTE: INCOMPLETE - APPEARS NEW/UNUSED.)

LS-250-SPB-1A 140402 (Mfg. Date 2/28/2014) 250 gal. capacity, UL Tag. No. S-674, 148 12 Gauge, 110 percent, Relief Venting with a capacity of not less than 56,000 cu. ft./hr., with Air Operated Pump for Stationary installation.

1 ft. 11 in. x 1 ft. 11in. x 4 ft. 1 in. long Fabricated Carbon Steel, Each having 2- 2 in. Top Ports, Each with Bottom Angle Iron Hold-Down Plates.

3 ft. dia. x 4 ft. long (approx.) 200 gal. (approx.) capacity, Insulated with 2 to 3 in. of Material, having Metal Cladding Exterior, mounted on 4- 4 in. sq. Tubing 15 in. high Legs with Floor Plates, having Electric powered Submersible Pump.

H9806-2 (Mfg. Date 2003) Max Allowable 20° F @SH 75, CH25, Psi @ SH 300° F, Size 28 x 144 BEM, capacity 67 cu. Ft. Max All 20° F, Carbon Steel Shell, Stainless Steel Tube Bundle, TAG No. MO2, Top and Bottom Caps each with 8 in. dia. (approx.) Flanged Port.

For Vertical Operation, having a 64 in. OD x 12 ft. 10 in. Carbon Steel Outer Shell, with Top Cover having a 7 in. OD (approx.) Top Positioned Flanged Port with Interior Installed Stainless Steel Tube Bundle; 4 ft. dia. x 9 ft. 10 in. long (approx.) having Bottom and Top Collector Rings, 4 in. dia. (approx.) Stainless Steel with 60- (approx.) Vertically installed 1-1/4 in dia. (approx.) Stainless Steel Tubes.

1000 gal (approx.) capacity, 175 cu. ft., Carbon Steel, 8 ft. Seam-to-Seam, 4 ft. dia. (approx.) Dome Caps on both Ends, Skirted Bottom, 2- 6 in. dia. (approx.) Side Positioned Ports, Flanged, 1- 9-1/2 in. dia. (approx.) Bottom Positioned Flanged Port.

1000 gal (approx.) capacity, 175 cu. ft., Carbon Steel, 8 ft. Seam-to-Seam, 4 ft. dia. (approx.) Dome Caps on both Ends, Skirted Bottom, 2- 6 in. dia. (approx.) Side Positioned Ports, Flanged, 1- 9-1/2 in. dia. (approx.) Bottom Positioned Flanged Port.

800 gal. (approx.) Capacity, 115 cu. ft., Carbon Steel, 5 ft. 4 in. Seam-to-Seam, 5 ft. dia. (approx.) With Oval Clean-Out Hatch, with 2- 2 in. dia. (approx.) Ports, 1- is Bottom Center Positioned and 1- is Top, Side Positioned.

SO 43214, NB 730893 (Mfg. Date 2013) Part No. CRNL 4040.5678901234T 400 gal. capacity (approx.) 32 in. dia. x 8 ft. (approx.) Seam-to-Seam, Domed Caps on both Ends, Skirted, having 3- 3 in. dia. Ports, 3- 1 in. Ports, 1- Visual Sight Gage, 1- Joint of 3 in. dia. x 8 ft. long (approx.) Pipe that is attached to the Tank, 1- Oval Clean-Out Hatch. MAWP 200 psi @ 400°F, MDMT -20° F @200 psi, HD.196 SH. 248.

S/N 12406 (Mfg. Date 1949) 287 Water gallon capacity, 84 in. Seam-to-Seam, 32 in. dia. (approx.), 200 psi. (NOTE: May NOT meet Current Certification Standards.)

575 gal. capacity (approx.) 42 in. dia. x 8 ft. tall (approx.) Flat Top and Bottom, Flanged, Bolted Clean-Out Hatch, 2- 2 in. dia. (approx.) Flanged Ports.

32 in. dia. x 39 in. (approx.) Straight-Wall-Height, having Domed Top with a 12 in. to 9 in. ID (approx.) Reducing Fitting, Stainless Steel, Flanged with 4 ft. long Conical Hopper Discharge; 1- 4 in. Flanged Side Mounted Port. 1- Unit is Mounted on a 4- Leg, 3 in. dia. Pipe Frame.

Consisting of 1- 22-1/2 in. dia. x 51 in. long (approx.) Carbon Steel having Shaft Hubs; 1- 15 in. dia. x 51 in. long (approx.) Carbon Steel having Shaft Hubs.

Carbon Steel, 8 in. dia. x 6 ft. 8 in. long (approx.); Flanged End Fittings, 1- is equipped with 90° Ell, Flanged.

Rolled and Crimped Galvanized Steel consisting of but not necessarily limited to: 1- Joint 28 in. dia. x 10 ft. long (approx.), 1- Joint 28 in. dia. x 8 ft. 7 in. long (approx.), 1- Joint 17 in. dia. x 11 ft. long (approx.), 1- Joint 11-1/2 in. dia. x 10 ft. long (approx.), 1- Joint 11-1/2 in. dia. x 9 ft. 5 in. long (approx.), 1- Piece Y-Type Ductwork 12 in. dia. (approx.) 1- Piece 45° Ell, 17 in. dia. (approx.).

Specification DOT 57 12093 B 8, (Original Test 1/23/1993) 275 gal. capacity, 316 Stainless Steel, having a 21 in. dia. Top Mounted Protection Ring for 5- Ports, 1- 4 in., 2-3 in. 1- 2-1/2 in., and 1-1/4 in. Outlets.

COATS TIRE CHANGE MACHINE 40-40A 07855, With Air Receiver Tank and Cylinder; OLYMPIA MULTIPURPOSE VISE, 5 in., Pedestal Mounted on a 20 in. Truck Rim.

3-6 cu. ft. capacity (est.) powered by BRIGGS & STRATTON, 1- Cylinder Air Cooled Gasoline Engine, mounted on Single Axle having 4.00-12 Pneumatic Tires, Pin Type Trailer Towing Hitch.

46 in. high x 6ft. 8 in. wide (approx.) OD, with Safety Rails on 3- Sides.

For 55 gal. Drums, with Lifting Frame and Hook Ring.

32 in. dia. x 60 in. tall, (NOTE: NEW/UNUSED).

FAIRBANKS MORSE PLATFORM BALANCE BEAM SCALES, (NOTE: Base of Scales is Cracked/Broken, Inoperable.) 1- Scale Platform Protection Plate with Headache Rack Backboard, Cast Carbon Steel. (NOTE: for Salvage Only). 3- PIECES CARBON STEEL PAN SECTIONS, ROLLED, Each Piece is 48 in. wide x 8 ft. long x 1/4 in long (approx.) Rolled Trough Pan/Dome having a 2 in. Lip.

Carbon Steel, consisting of but not necessarily limited to: 1- Joint of 6-1/2 in. OD x 39 in. long (approx.) Pipe having 2- 4 in. Steel Ball Valves, Flanged, Each having a EL-O-MATIC Air Actuated Remote Valve Unit, and 2- Eccentric Swedged Reducers.

CONVEYOR, FLAT BELT, POWERED, 12 ft. long x 14 in. wide powered by BALDOR Electric Motor driving through a Right Angle Reduction Gearbox, Mounted on Adjustable Height Legs. CONVEYOR, FLAT BELT, POWERED, 18 ft. 8 in. long x 18 in. wide powered by Electric Motor, driving through a Reduction Gear Box. (NOTE: The Frame of this Unit is Broken/Bent, thus is not Serviceable.)

Model KA-30 S/N A301305002 (Mfg. 5/2013) 3- Cylinder, 2- Stage, Wind Capacity: 3.00 m³/ min, Piston Capacity: 3.53m³/min, Unit Input Ratio Power: Kw/ (m³ /min), Dimensional Size: 1800 x 790 x 1500 mm, Ex-Factory Date: 05/2013, Power 22 Kw, Rated Speed: 236 r/min, Weight 713 Kg, Rated Discharge Pressure: 0:8 MPa, powered by NORTH AMERICAN ELECTRIC INC. Cat. No. PE286T-30-4C, 30 hp Electric Motor, 208-230/460 v AC, 1760 rpm, S/N 1206 1491, with 5- V-Belt Power Transmission with V- Belt Safety Guard, mounted on 480 L (approx.) Horizontal Air Compressor Tank having 4- 9 in. dia. Non- Castering Steel Wheels, with Electrical Control Panel and Motor Starter having 3- Phase 480 v Feed from H3 Panel Motor Starter from Feed.

Job No. 286724 Powered by 3 hp (approx.) Electric Motor having a Belt Safety Guard, mounted on ROY E. HANSON Air Receiver Tank, Horizontal, S/N 22463 (Mfg. Date 1982) 60 gal., powered by Electric Motor having Belt Safety Guard.

(No OEM Build Plate was found.) Consisting of but not necessarily limited to: 2- 3- Section Skimmer Intake Modules, each Section is 6 ft. wide x 49 in. high (approx.) with GODWIN Pumps®. 2- Sections of 11 in. ID x 25 ft. long (approx.) Flexible Hose, 1- having Ball Joint End coupling Fittings, 1- having Flexible Flanged Bolted End Coupling Fitting. With PARTS Consisting of but not necessarily limited to: 2- 11 in. ID (approx.) Galvanized Ball and Hub End Fittings, 5- Aluminum and Plastic Pipe Fittings, 1- Joint of 11 in. x 5 ft. long Plastic Pipe.

4200 (or Similar) 1974 (approx.) vin 85001CYB11158 Powered by CAT 1674 Turbo Charged Diesel Engine, FULLER Road Ranger Model RTOD-9513, 13-Speed Transmission; Engine rebuilt by WYOMING MACHINERY, Work Order No.CP00898, (Date 1-24-2000), S/N 94B038370; having a 3,750 gal. capacity (approx.), 8 ft. wide x 20 ft. long (approx.) 14.13 m³ volume Oval Water Tank (Mfg. 2000) with Hydraulically Driven Centrifugal Water Pump, 2- Rear Facing Pressure Discharge Water Spray Heads.; 2- Rear Facing Flood Lights, Rear Push Block with 2- Wire Rope Hooks, 2- West Coast Mirrors, 2- 80 gal. (approx.) Saddle Fuel Tanks, BUDD 10- Hole Steel Wheels, 11R24.5 Tires.

Model FCG20N6 S/N 484000956 (Mfg. Date 1987-1988) 3,650 lbs., capacity, powered by LPG Engine, Operator ROPS Canopy, Indicated Hours - 8,612.4, 3- Stage Mast, Hydraulic Side Shift Forks, Solid Warehouse Tires. (NOTE: Engine Inoperable.)

Consisting of but not necessarily limited to: 2- Power Supply Modules and 2- Control Modules.