Premier Firearms Auction - Day 3

Premier Firearms Auction - Day 3

Sunday, May 19, 2024  |  9:00 AM Central
to bid until the live auction begins!
Premier Firearms Auction - Day 3

Premier Firearms Auction - Day 3

Sunday, May 19, 2024  |  9:00 AM Central
to bid until the live auction begins!
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 9 of 30

First Generation Colt Single Action Army Revolver

Lot # 3200 (Sale Order: 201 of 749)      

Documented California Shipped First Generation Colt Single Action Army Revolver with Factory Letter

The Colt Single Action Army Revolver is arguably the most iconic American handgun. In the hands of ranchers, cavalrymen, Native Americans, lawmen, and outlaws, the Peacemaker’s legacy was forged out in the hostile American West and continues to gain popularity among today's collectors. Offered here is a very attractive example of the legendary Peacemaker chambered in the iconic .45 LC caliber. The accompanying Colt factory letter dated April 3, 1963 states the revolver was shipped to William H. Hoegee Co. of Los Angeles, California, on March 16, 1929 with a 7 1/2 inch barrel in .45 caliber, blue finish, and hard rubber grips. This was a single gun shipment. The barrel has the standard one-line Hartford address on top and "45 COLT" on the left side. The left side of the frame has the two-line patent dates marking followed by a Rampant Colt. The letter "J" is stamped above the frame serial number. The matching serial number appears on the frame, trigger guard, back strap, and both grip panels. The matching last two digits of the serial number "63" appear on the back of the cylinder. The assembly number "962" is marked on the loading gate and back of the frame. With a custom display case.

Class: Curio & Relic Handgun

Very fine, retaining 80% original blue finish with high edge wear, cylinder drag line, and grip straps thinning to a brown. The frame and hammer retain 85% original case colors. The grips are excellent with a few minor handling marks and overall crisp checkering. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Texas Shipped First Generation Colt Single Action Army Revolver

Lot # 3201 (Sale Order: 202 of 749)      

Myres El Paso, Texas Shipped First Generation Colt Single Action Army Revolver in .38 Colt with Myres Holster Rig and Factory Letter

The accompanying factory letter states the revolver was sold to famed saddlery Myres Co. (address unavailable) and shipped to Momsen, Dunnegan & Ryan Co. of El Paso, Texas, on January 28, 1928 with a 4 3/4 inch barrel in .38 Colt, blue finish, and hard rubber stocks. This was a single gun shipment. Few firearms are more deeply associated with the American West than the Colt Single Action Army and perhaps no other state personifies the image of the Wild West more the Texas. Momsen, Dunnegan & Ryan Co. was a prosperous El Paso based hardware company that traced its lineage back to 1881 when Gustave Momsen arrived in El Paso from San Francisco. Fixed sights, with "38 COLT" on the left side of the barrel, two-line Hartford address on top, and the two-line, three-date patents next to the uncircled Rampant Colt on the frame. "08" on the rear cylinder face. Matching assembly number "838" on the loading gate and hidden on the back right side of the frame. Right side of the grip frame numbers matching. Underside of black hard rubber grips matching hand-numbered. As a Colt SAA sold to Myres Co. it is fitting that it comes with a S.D. Myres floral tooled holster rig. Born in Texas in 1871, Sam D. Myres founded his famed saddlery and leather business in Sweetwater, Texas, in 1897 and moved the operation to El Paso, Texas, in 1920. He offered some of the country’s finest saddles money could buy. A humbled Myres said, “I want to do the job right. I don’t want to make them ashamed they asked me to lead the parade.” And he did just that. This holster rig is certainly a testament to his craftsmanship.

Class: Curio & Relic Handgun

Fine, retaining 40% original case colors on the frame with some mild scattered spotting, 50% original blue finish on barrel, cylinder and grip frame with some mild flaking and edge wear, and mild cylinder drag line. Modified refinished front sight. Grips are also fine with some dings and dents. The holster rig is very fine. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Sharps Model 1852 Slant Breech Percussion Saddle Ring Carbine

Lot # 3202 (Sale Order: 203 of 749)      

Very Fine Sharps Model 1852 Slant Breech Percussion Saddle Ring Carbine

Approximately 5,000 manufactured between 1853-1855 by Robbins & Lawrence of Windsor, Vermont, for Sharps before production shifted to the very similar Model 1853 in Hartford, Connecticut. This is the earliest Sharps Model with the distinctive "slanting breech" and is fitted with the lever hinge pin retaining spring mounted on the right rear of the forearm. The top of the barrel is marked "SHARP'S RIFLE/MANUFg CO./HARTFORD, CONN." behind the rear sight, the receiver upper tang is marked "C.SHARPS/PATENT/1848" followed by the serial number, and the lock is marked "C.SHARPS'/PATENT./1852." Brass blade front and ladder rear sight. Sling ring and saddle bar mounted on the left of the barrel band and receiver. Mounted with a smooth forearm and straight grip stock with brass patch box and carbine buttplate. Matching serial number "4741" marked on the receiver, breech block and bottom of the barrel.

Class: Antique

Exceptionally fine, retains 80% original brown finish with some scattered minor freckling, one very small patch of minor pitting on the left of the barrel and a few dings on the right, 50% niter blue finish on the small parts with smooth brown patina on the balance, attractive untouched natural aged golden patina on the brass fittings, and sharp markings and edges in the metal overall. The wood is very fine with some scattered light scratches and dents, some minor chipping on the bottom of the forend ahead of the lever, and defined edges. Mechanically excellent. One will look a long time to find a better example.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 9,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Model 1855 First Model Sporting Percussion Revolving Rifle

Lot # 3203 (Sale Order: 204 of 749)      

Colt Model 1855 First Model Sporting Percussion Revolving Rifle

Approximately 1,000 of the "First Model" revolving rifles and carbines were manufactured in 1856-1859 in several barrel lengths. The design is essentially an upsized version of the Model 1855 "Root" revolvers. These are historically significant as the first long guns manufactured at Colt's Hartford factory. They are easily identified by an oiler and cleaning rod mounted on the left side of the frame (both absent on this example). This rifle has a dovetailed blade front sight, buckhorn notch rear sight (replaces removed frame sight), "{COLT'S PT./1856}" and "{ADDRESS COL. COLT/HARTFORD CT. U.S.A.}" on top of the barrel at the breech, bordered knurling on the hammer, double spur trigger guard, smooth buttstock with rifle buttplate, and the matching serial number on the barrel, cylinder, frame, and trigger guard tang.

Class: Antique

Good as period modified, with a mix of attractively aged plum and gray patinas, and some patches of minor pitting and dings. The re-oiled weathered wood is good with some light handling marks, various cracks at the edges, and some filled in designs visible on either side of the wrist. Mechanically fine. This is a solid representative example of a scarce Colt Model 1855 First Model Sporting rifle and would make a fine addition to any American historic or Colt collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 5,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colorado Colt Model 1871-72 Open Top Revolver with Holster Rig

Lot # 3204 (Sale Order: 205 of 749)      

Historic Factory Documented Carlos Gove & Co. Colorado Territory Shipped Colt Model 1871-72 Open Top Revolver with Extremely Rare Gove Denver Marked Holster, Buckle, and Belt Rig

Carlos Gove (1817-1900) is one of the most legendary gunsmiths and dealers of the American West. When the "59ers" began rushing into the Colorado Territory during the Pike's Peak Gold Rush, he purchased supplies and headed out from Council Bluffs and soon opened a gun shop in Denver in 1862. He partnered with J.P. Lower and Gove's son-in-law Frank Church to form C. Gove & Co. in 1872 and ran the "Denver Armory." When Gove received the Open Top shipment in January 1874 he had a read market as many frontiersmen already had either a Henry rifle or a '66 Winchester in the same .44 rimfire caliber. The following year, the firm became C. Gove & Sons. In addition to Colt's revolvers, Gove outfitted the western and great plains expansion as a dealer and customizer of Sharps rifles. The included copy of a factory letter lists this revolver a one of 50 in .44 rimfire with 7 1/2 inch barrels and blue finish shipped to C. Gove & Company in Denver, Colorado Territory, on January 10, 1874. The revolver has standard markings and features, including matching sharp serial numbers. The included holster appears to be marked" GOVE & SONS/DENVER COL" and has some light border tooling, and the matching leather cartridge belt has a "C. GOVE & CO/DENVER COL" brass belt buckle. Only a small number of these belt buckles are known, and this one is in particularly nice shape. In addition to these Open Tops being the first lettered metallic cartridge Colts shipped West of the Mississippi, Gove had these holster rigs and belt buckles made to accompany the Colt Open Top revolvers he was selling. See B. Welch, "Frontier Denver", T.G.C.A. Magazine, Fall 2007. This is the second three-piece C. Gove Open Top set we have cataloged, both consigned by the same advanced collector, who says he thinks these are the only two known.

Class: Antique

Very good. The revolver has a very attractive appearance with mostly smooth gray patina overall from age and strong traces of the original blue finish remaining in the sheltered areas. The cylinder scene and other markings are distinct. The grip appears original and is good with traces of the original varnish, lower edge wear, small flakes at the toe and heel, scratches, and dings. The Gove cartouche is on the top face of the holster where it received extensive wear, but the holster and belt rig is very good overall considering it is 150 years old and its rarity with some wear including some crackling and flaking. All stitching on the holster and belt is complete. The 12 cartridge loops for .44 rimfire are worn with some cracking but remain solid. The brass buckle has a very dark aged patina. This is a rare territorial Carlos Gove three-piece set with a documented Colt Open Top, belt with distinctive Gove buckle, and holster. The set will certainly make an exceptional addition to any antique American firearms collection, especially one centered on the American West.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 15,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Wm. H. Vanderbilt Cased Engraved Colt 1851 Navy with Carved Grip

Lot # 3205 (Sale Order: 206 of 749)      

Historic Documented Cased Factory Engraved Colt Model 1851 Navy Percussion Revolver with Extraordinary Relief Carved Grip Formerly in the William M. Locke Collection and Identified as Presented to William H. Vanderbilt

Dating to 1859, this beautiful deluxe Colt Model 1851 Navy revolver features beautiful factory engraving consisting of Germanic style scrollwork inhabited by a dog or bear's head on the left by the wedge, floral blooms, beaded backgrounds, rayed/shell accents, a dot motif along the edge of the barrel lug on the left, and beaded backgrounds. The hammer features the classic dog/wolf head motif. The left side of the frame features the inscribed "COLTS/PATENT" marking rather than the usual stamped marking. The patterns are similar to the example attributed to Georg Sterzing on page 83 of "Colt Factory Engravers of the Nineteenth Century" by Herbert Houze. His style is very similar to the work of Gustave Young who would have been out of the country at the time. The barrel features a dovetailed blade front sight and the "-ADDRESS SAML COLT HARTFORD CT.-" address. The left side of the trigger guard has a "3". Matching serial numbers are visible on the cylinder, loading lever (partial), barrel lug, frame, trigger guard, and back strap, and the factory dot marking denoting special finishing and/or engraving is stamped above or below the serial numbers along the bottom of the revolver. The grip features a highly detailed raised relief carved bust of a dragoon officer. The revolver comes in a fitted case with wine colored lining, several projectiles, key, cartridge pack, blued L-shaped combination tool, Colt patent martial pattern flask with angled charger, blued ball/bullet mold, and an Eley Bros. cap tin.This stunning revolver is featured in "The William M. Locke Collection" by Frank Sellers. The revolver is first illustrated on page 6 within a selection of Colt Model 1851 Navy revolvers with a variety of carved grips that are illustrated again on page 103, and the cased set is then illustrated and described on page 106 where Sellers states: "Accompanying this revolver are letters and affidavits tracing the history of this gun from its original presentation by the Colt factory to William H. Vanderbilt, aide de camp to the Prince of Wales when he was on a visit to this country in 1865. Passed down through the family of Vanderbilt to an H.R. Lehman who sold it in 1936 to George W. Pariso whose collection was sold at auction in the early 1940's." It is also illustrated on page 85 of "Colt Engraving" by R.L. Wilson where it is noted as having been "accompanied by papers documenting its presentation to William H. Vanderbilt by the factory (papers have since been lost)", and the historical attribution is discussed in the include 1979 letter from Arnold Marcus Chernoff to Dr. Jon Parker to whom he had recently sold the set. Per Chernoff, the original provenance documentation, which he had personally seen, had been lost after the set was sold from Locke's collection. Without the documentation, the revolver's origin story has been difficult to pin down, and at least some of the history appears to be confused. Albert Edward, Prince of Wales, (1841-1910), later King Edward VII, was the first Prince of Wales to tour North America and visited British North America (present day Canada) and the United Sates, but he made this tour in 1860 when he was just 18 rather than 1865. The revolver being presented in 1860 would be more logical given it was produced in around the latter part of 1859. The trip was initially planned to only include present day Canada, but the prince was invited by President James Buchanan as well as by the leading men of New York, and additional cities subsequently extended invitations. The young prince saw much of the country by train in a short period and was hosted by leading men at many of his various stops, sometimes harassed by rowdy crowds, particularly by Irish-Americans. After his arrival in New York City on October 11, 1860, he was honored by multiple large parades, and a ball on the evening of October 12 at the Academy of Music paid for by 400 members of the New York elite who each contributed $100. Thousands of guests showed up, leading to the floor partially caving under their weight, and the prince was moved away from the crown to the safety of the super room with the elite and later returned to dance with some of the ladies in the ballroom. He subsequently visited the U.S. Military Academy at West Point, Boston, and then finally Portland, Maine, before returning home.Cornelius Vanderbilt (1794-1877) of New York was one of the most powerful and wealthy businessmen and a do
more... Provenance: The Vanderbilt Family; H.R. Lehman; The George W. Pariso Collection; The William M. Locke Collection; Arnold Marcus Chernoff, Ltd.; The Dr. Jon Parker Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 35,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Factory Engraved Colt Model 1851 Navy Percussion Revolver

Lot # 3206 (Sale Order: 207 of 749)      

Desirable Factory Engraved Colt Model 1851 Navy Percussion Revolver

This revolver was manufactured in 1853 and has beautiful factory scroll engraving readily attributable to Master Engraver Gustave Young or his shop. The patterns are consistent with the examples shown in various books on Colt engraving, including in R.L. Wilson's books and would be an early example of his work for Colt. Young and L.D. Nimschke were both trained under Ernst Moritz and Gustav Ernst in Zella, Thuringia, Germany, before they immigrated to the U.S. Other less well-known German-American engravers trained there as well. Though they all have somewhat similar styles, Young developed his own patterns, and his work as Colt's main engraving contractor from 1852 to 1858 is identifiable and remarkable. The scrollwork on this revolver is inhabited by a bald eagle head above the wedge on the right, an open mouth dog head just ahead of the wedge on the left, another open mouth dog head on the left side of the recoil shield, and a closed mouth dog head below the hammer screw on the left. While Young is well-known for heads among his fine scrolls, four on a single revolver is very rare. The engraving has punched backgrounds and includes floral accents, ray/fan patterns, "COLTS/PATENT" hand inscribed in a panel on the left side of the frame, an early version of Young's wolf head design on the hammer, and some wavy borders. The dot marking used by Colt to denote arms selected for engraving and or special finishing is marked by the main serial number locations. Matching serial numbers are found on the loading lever, wedge, arbor pin, cylinder, barrel, frame, trigger guard, and back strap. A "2" is also marked by the serial number on the barrel and cylinder. The barrel also has a brass cone front sight and is marked "-ADDRESS SAML COLT NEW-YORK CITY-."

Class: Antique

Very good plus with crisp engraving throughout, 80% original silver plating remaining on the grip frame, traces of original case colors and blue finish in the protected areas, mostly a smooth brown patina on the balance, minor oxidation, and general minor wear. The grip is fine and has an attractive natural color and grain, some shrinkage, minor age cracks in the butt and on the right side, and minor edge wear. Mechanically fine. This is a very attractive example of Gustave Young's early work for Colt and one of the few Young engraved Model 1851 Navy revolvers to feature this many of his animal head designs among the scrollwork. This is definitely a very attractive classic Colt that would add value and interest to any collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 5,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Gustave Young List Engraved Colt Model 1849 Pocket Revolver

Lot # 3207 (Sale Order: 208 of 749)      

Documented Factory Engraved Colt Model 1849 Pocket Percussion Revolver Listed on the Master Engraver Gustave Young's Billing List from September 23, 1854

This revolver was featured in the article "A Sleeper: Old Model Pocket Pistol Serial #91157" by Robert G. Smith in the November 1992 issue of "The Gun Report" in which Smith discusses the difficulty of finding a six inch barreled Model 1849 Pocket with an original antique ivory grip for his collection, purchasing the revolver from William M. Locke, and later discovering that the revolver is listed in the 6 inch column of Gustave Young's list September 23, 1854, listing of revolvers engraved in his shop. This list has been published in multiple books by R.L. Wilson, including "Samuel Colt Presents" as noted in the article. This revolver provides insight into the important years of the 1850s when engraving styles at Colt were changing over to the Germanic style brought over to the U.S. by recent immigrants. Per research by Herbert Houze in "Colt Factory Engravers of the Nineteenth Century," Young moved to Hartford sometime after his return to the U.S. on June 4, 1853, and he is believed to have become Colt's primary engraving contractor after that position was created in 1855 and remained in that position until making a return visit to Germany starting in the summer of 1858 and returned to working for Colt in 1861, established his own engraving shop in 1864, and moved to Springfield, Massachusetts, in late 1869 and became the primary engraver for Colt's competitor: Smith & Wesson. The revolver features complex and finely detailed scroll and floral engraving with textured backgrounds, "Saml Colt" inscribed in script with a decorative engraved border rather than an address on the top of the barrel, "COLTS/PATENT" engraved on the left side of the frame in a panel among the scrolls, shell/fan motifs on the bottom of the barrel lug and top of the back strap, the wolf/dog head motif on the hammer, and some crosshatched panels by the serial numbers on the barrel lug and frame. The factory dot marking used to denote special finishing is marked above or below the serial numbers along the bottom of the revolver. All of the visible serial numbers match, but the back strap is a replacement renumbered to match. The five-shot cylinder has the classic stagecoach scene.

Class: Antique

Very good with mostly silver-gray patina on the iron, mild pitting at the breech and cylinder, 90% plus original silver plating on the grip frame, aged patina on the silver and brass, and general mild overall wear suggesting this revolver was actually carried and used as a sidearm in the mid-19th century. The back strap is professionally re-numbered to match the rest of the revolver. The grip is fine and has aged patina, age cracks, and attractive grain. Mechanically excellent. This is a scarce documented Colt Model 1849 Pocket listed by serial number on Gustave Young's billing list to Colt on September 23, 1854.

Provenance: The William M. Locke Collection; The Robert G. Smith Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Cased Colt Model 1851 Navy Revolver Inscribed Lt. Wm Mathie

Lot # 3208 (Sale Order: 209 of 749)      

Cased Historic Civil War 7th Illinois Infantry Colt Model 1851 Navy Percussion Revolver Inscribed "Lt. Wm Mathie" with Documented Special Order Grip and Factory Letter

The included factory letter confirms the configuration (including the grip) and that this revolver was one of 48 of this type in a shipment to major dealer B. Kittredge & Co. of Cincinnati, Ohio, on September 23, 1861. The revolver has a dovetailed blade front sight, the one-line New York address, "2" on the left side of the barrel lug, "COLTS/PATENT" on the left side of the frame, standard naval battle scene on the cylinder, matching serial numbers, and the factory dash marking above or below the serial numbers along the bottom designating the revolver for a special order grip and/or special finishing. The back strap is inscribed "Lt Wm Mathie" in flowing script. The revolver comes in a fitted presentation case with a cap tin, spare mainspring, turned bone container with spare nipples, key, powder flask, L-shaped combination tool, blued ball/bullet mold, and a Rampant Colt pin. Information on Lieutenant William Mathie (b. 1836) of Bunker Hill, Illinois, accompanies the revolver. He enrolled as a 1st lieutenant in Company F of the 7th Illinois Infantry on July 25, 1861. Effective April 8, 1862, Mathie was promoted to captain. On the muster roll for August 18, 1862, as "Absent on furlough since August 14, 1862, by special authority from Sec. of War for Maj. Gen. U.S. Grant." In "The Papers of Ulysses S. Grant," Mathie appears in a letter from Colonel John Cook to Grant: "At 3:15 P.M. Lieut Mathie Comd'g. Co. F. 7th Ills, Officer of the Day, reported to these Head Quarters the approach of three Rebel Gun Boats, names unknown, which were allowed to reach a distance of four and a half miles from Fort Holt, when deeming it imprudent to allow them to progress further the batteries were ordered to open upon them..." The 7th participated in the battles of Ford Donnelson and Shiloh before Mathie resigned on Dec 10, 1862. He was mustered into the Company A of the 97th Illinois Infantry on Dec. 21, 1863. Mathie was transferred to D Company of the 37th Illinois Infantry (Fremont Rifles or Illinois Greyhounds) on Jan. 20, 1864, and mustered out as a sergeant on May 15, 1866, with the regiment after guard duty around Houston.

Class: Antique

Good with 25% original silver plating remaining and concentrate on the trigger guard, aged patina on the silver and brass, traces of original case colors and otherwise a smooth gray patina overall, several small dings, some faint pitting, and general mild overall wear. The grip is fine and has very attractive aged patina and grain and minor age cracks. The inscription and most markings remain crisp. Mechanically fine. The relined/refinished case is very good with age and storage related wear. The flask is fine, and the bullet mold is very good.

Provenance: Lt. William Mathie; David Condon Inc.; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

U.S. Navy Colt Model 1860 Army Percussion Revolver

Lot # 3209 (Sale Order: 210 of 749)      

Scarce Documented Civil War U.S. Navy Shipped Colt Model 1860 Army Percussion Revolver with Fluted Cylinder and Factory Letter

The included factory letter indicates this revolver was part of a shipment of 8 inch barreled Model 1860 Army revolvers sold to the U.S. Navy Department and shipped to the commanding officer at the U.S. Navy Yard in Boston on June 8, 1861. Some of the revolver in these early U.S. military shipments included the distinctive fluted cylinders and "four-screw" frames. Some of the early fluted cylinders failed due to weakness at the rear of the chamber at the cylinder stops. Colt improved the design by introducing the "cavalry cylinder" with a taper to the chamber at the rear thereby leaving more material at the stops preventing failures, but Colt soon eliminated both of the fluted cylinder and the "fourth-screws" to streamline production and reduce costs. Navy shipments of the Model 1860 Army were much more limited than those for the U.S. Army. On page 202 of "The Colt Model 1860 Army Revolver," author Charles Pate writes, "While their number was not great, some Colt NMA revolvers saw considerable service on the seas and inland waters of the U.S. during the Civil War." The largest order for the Navy was for just 500 revolvers, and we rarely get the opportunity to offer the Navy 1860 Army revolvers. They were employed on the U.S. Navy ships participating in the blockade of the South as part of the Anaconda Plan and also on the smaller vessels conducting river operations. Like the early U.S. Army examples, this one has no government inspection markings. The 8 inch barrel has a German silver blade front sight and the one-line New York address. The frame is cut for a shoulder stock and has the slightly protruding "fourth screws" on the sides as well as the "COLTS/PATENT" marking on the left. The left side of the trigger guard has a "4" visible. The distinctive fluted cylinder has "PATENTED SEPT. 10th 1850" marked in one flute. Matching serial numbers are found on the wedge, arbor pin, back of the cylinder, barrel, frame, trigger guard, and back strap.

Class: Antique

Very good with traces of original finish, dark brown patina and some light oxidation/pitting on the iron, attractively aged patina on the brass, general mild overall wear, and mostly distinct markings. The refinished grip is very good and has minor handling and storage wear. Mechanically fine. Overall, a very solid and attractive U.S. Navy Colt Model 1860 Army with the desirable fluted cylinder.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Model 1851 Navy Percussion Revolver with Deluxe Grip

Lot # 3210 (Sale Order: 211 of 749)      

Colt Model 1851 Navy Percussion Revolver with Deluxe Grip

Manufactured in 1856. The barrel has a brass cone front sight and the New York City address. The left side of the barrel lug has a small "T", the left side of the frame has "COLTS/PATENT/U.S.", and "L" and "G" are marked on the left side of the trigger guard. The cylinder has the classic Naval Battle of Campeche scene. Aside from the wedge ("1999"), matching serial numbers are found throughout the various metal components. The grip is very nicely figured walnut with a varnish finish.

Class: Antique

Very good plus with traces of original blue and casehardened finish, 40% original silver plating, smooth gray and brown patina on the balance of the iron along with some flash pitting, attractive aged patina on the brass and silver, and generally mild overall wear. The attractive grip is very fine and has attractive flame figure, light edge wear, hammering marks on the butt, and some dings and scratches. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Era Colt Model 1851 Navy Percussion Revolver

Lot # 3211 (Sale Order: 212 of 749)      

Exceptionally Fine Civil War Era Colt Model 1851 Navy Percussion Revolver

This Colt Model 1851 was manufactured in 1861 and has the large round brass trigger guard. The matching serial number is marked on the various components. It has a brass cone front sight and the late style one-line "New York U.S. America" address on the barrel, naval battle scene on the cylinder, "COLTS/PATENT" on the right side of the frame, and an oil finished walnut grip. The Model 1851 Navy saw extensive use during the Civil War largely as personal side arms and many were carried to the West by the thousands of men and women seeking their fortunes through cattle, mining, or theft.

Class: Antique

Very fine. The revolver has 60% plus of the original blue finish and 50% of case colors mixed with a well established brown patina overall. The exposed brass has an attractive aged patina. The oil finish grips are fine with scattered dings wear and a couple of small chips and cracks. The markings including the cylinder scene are crisp. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 7,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Cased Colt 1849 London Model Percussion Revolver

Lot # 3212 (Sale Order: 213 of 749)      

Extremely Fine Cased Colt 1849 London Model Percussion Revolver with Accessories

These revolvers were manufactured from 1853 to 1857 and serial numbered in their own range, 1-11,000. This is a nice example of a cased 1849 Pocket London manufactured in 1854. The London Model is identical in configuration to the standard Model 1849 but has a higher quality of finish. The top barrel flat is marked "-{ADDRESS. COL. COLT./LONDON.}-" inside fancy brackets. "COLTS/PATENT" is on the left side of the frame, and the cylinder is roll engraved with the stagecoach holdup scene. The left side of the barrel lug is marked with "crown/GP" and "crown/V" London proofmarks, and the same proofmarks alternate on the cylinder between the nipples. The complete matching serial number is marked on the barrel, frame, trigger guard, cylinder, back strap, loading lever, wedge, and arbor pin. Casehardened frame and loading lever, silver plated brass trigger guard and back strap, blue on the remaining surfaces, and fitted with a smooth one-piece walnut grip. Complete in a mahogany case with red velvet lining and an area for a plaque on the lid, which is absent. The case contains an iron cleaning rod with a wooden handle, screwdriver/nipple wrench, bag shaped flask marked "COLTS POCKET FLASK" and "JAMES DIXON/& SONS/SHEFFIELD" on the top, blue bullet mold marked "COLTS/PATENT" on the sprue cutter, and an Eley Bros cap tin partially full.

Class: Antique

Very fine. The barrel retains 95% bright original high polish blue finish with edge wear, some scattered minor flaking, and minor scratches. The cylinder has traces of blue on the balance with smooth gray patina and an exceptional, crisp original scene. The right side of the frame and the loading lever retain most of the faded original case colors with a smooth gray patina on the balance. The grip is excellent with 95% original varnish and showing a few minor dings. The markings are crisp and clear. Mechanically excellent. The case is fine with a moderate crack running across the lid. The lining shows noticeable wear in the area of the front sight; otherwise, there is some minor contact wear. The wood plaque is detached. The accessories are fine with most of the bright blue finish remaining on the screwdriver/nipple wrench and bullet mold.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 5,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Paterson Model 1839 Military Pattern Percussion Carbine

Lot # 3213 (Sale Order: 214 of 749)      

Highly Desirable Colt Paterson Model 1839 Military Pattern Percussion Revolving Carbine with Extremely Rare Cavalry Sling Bar

Only around 950 of these important early Colt Model 1839 carbines are estimated to have been manufactured in total by Samuel Colt's Paterson, New Jersey, factory c. 1838-1841. Of those, the U.S. Navy purchased 360, and they are known to have been used during the Mexican-American War. This Colt Paterson Model 1839 "Saddle Ring" or "Slide Bar" carbine certainly fits the description of a military pattern carbine that was adapted for a sling bar, secured to the plate on the left of the wrist. At the time of writing, this carbine is one of only three known examples of this type with the saddle bar, with the only other known examples, serial numbers 766 and 770 previously sold by Rock Island Auction, close to this example offered. In "Paterson Colt Pistol Variations" by Philip R. Phillips with James E. Severn and R.L. Wilson, 100 Model 1839 Carbines are noted as ordered in March of 1841 by the U.S. Ordnance Department (see page 93), and on March 29, 1841, a letter from Pliny Lawton, Superintendent of the Patent Arms Manufacturing Co., wrote, "If these Carbines are to have slides put on them for the belt I would advise that the inspection be deferred until that is done say one week hence when all will be ready or say by Tuesday week Let me hear from you immediately." (sic on page 177). The authors also note, "No Paterson Colt arms have come to the attention of the authors equipped with belt hook or slide devices." The option of a carbine with a sling bar would help Colt compete with its main competitor for innovative cavalry arms at the time: the breech loading Hall carbines which featured sling rings on the early models, including a ring mounted on the left side of the wrist on the Model 1836 which was manufactured up to 1840, and then sling bars and rings on the left sides starting with the Model 1842. Pages 108 and 176 of "Paterson Colt Pistol Variations" specifically discuss the fact that Colt's revolving carbines were up against the Hall carbines in government trials. In February 1841, multiple U.S. Navy officers provided glowing testimony concerning Colt's patent carbines in revolvers, and the carbine received especially favorable reviews after trials. Lieutenant Cicero Price, for example, wrote, "I have only to say that the advantages of Colt's carbine and pistol over the ship's musket and pistol are so manifest, and so great, that I hope soon to see them adopted altogether in the service. . ." However, once actually in service, the Patersons did not receive favorable reviews, and government orders ceased and thus brought about the termination of Colt's first firearms business. The navy and army of the Republic of Texas purchased and utilized Colt's advanced carbines, and these purchases led to Colt's use of the Naval Battle of Campeche as the scene on the Model 1851 Navy and subsequent models. R. L. Wilson wrote this model was "The most practical and popular of all Colts longarms from the Paterson period" and also indicated that Samuel Colt continued to sell and display this model into the 1850s. The Model 1839 is featured in multiple paintings by famous frontier artist George Catlin that were used to promote Colt's early firearms. On top of being the best of the Paterson long guns, this model is also significant as one of the first practical repeating long gun designs. There had been other repeating firearms in the past, but none of these were remotely as useful and many were unsuited to production on a large scale. This carbine is marked with matching serial number "761" on the inside of the loading lever, wedge, rear face of the barrel lug, back of the cylinder, cylinder arbor, hammer, hammer stirrup, trigger spring, rear face of the recoil shield, bottom of the upper tang, inside the upper stock channel, and inside of the saddle bar plate. Blade front and dovetail mounted notch rear sight. The right of the barrel is marked with the one-line legend "*Patent Arms M'g. Co. Paterson N.J.- Colt's Pt.*" with snake terminals at either end of the marking. "COLT'S PATENT ARMS MAN'Y Patterson JERSEY" marked on the cylinder along with "W L ORMSBY". The buttstock is fitted with a crescent iron buttplate.

Class: Antique

Very good. The barrel exhibits a smooth brown patina with a crisp Patent Arms legend on the right. The cylinder shows a smooth gray patina with strong markings and mostly visible scenes. The recoil shield retains traces of original blue finish with mottled brown and gray patina on the balance of the remaining iron surfaces. The balance of the frame retains mostly dark silvered out patterns of case colors. The stock is also very good with a protective coat of varnish applied, scattered scratches and dings, and some minor cracks behind
more...

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 30,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Belt Model Paterson Percussion Revolver with Extra Cylinder

Lot # 3214 (Sale Order: 215 of 749)      

Scarce Colt Belt Model Paterson Percussion Revolver with Extra Cylinder

The Colt Paterson was Samuel Colt's first revolver and helped make his name a byword for the revolver, and, though the Paterson venture was short lived and ended in commercial failure, the successful use of the Paterson by men like Samuel Walker and the Texas Rangers established both the revolver as a form and Samuel Colt's reputation and ultimately led to the rebirth of Colt's firearms business in 1847 and his company's immense success in the 19th century. He received his first patent for revolvers in 1835 in England and then the U.S. in 1836 and formed the Patent Arms Manufacturing Company in Paterson, New Jersey, later the same year. Less than 3,000 of his expensive revolvers split among several models and variations were manufactured before the company closed in 1842. The No. 2 and No. 3 Belt Models were manufactured c. 1837-1840 in a shared serial number range, and there is notable variation from example to example. This revolver has a stepped rear of the frame and coordinating stepped top of the back strap rather than the flat style observed on most examples. We have observed this variation on another .34 caliber Belt Model (sn. 698) that also featured the rounded cylinder and a straight grip with a flat butt like this example. The barrel has a German silver blade front sight and is marked "-Patent Arms Mg Co Paterson N.J. Colt's Pt.-" reading from the breech towards the muzzle. The five-shot, square back cylinder is roll engraved with a centaur hunting scene. The following numbers were noted: "604" on the back of the installed cylinder and "709" on the other cylinder, "709" and "11" on the key ring, "709" on the back of the barrel lug, "709" on the right side of the front strap and hammer, "709" in the butt mortise of the grip, and blank modern made wedge and back strap.

Class: Antique

Fair with 20% of original blue finish, some light original case colors on the frame, mostly smooth gray and brown patina on the balance, distinct markings, some minor oxidation and small patches of mild pitting, a crack in the right side of the frame at the trigger screw, repaired hammer, modification/repair on the trigger, and broken mainspring. The grip is very good and has over half of the period refurbished finish, a few dings and scratches, and minor handling wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 16,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Pair of Factory Engraved Colt Model 1851 Navy Revolvers

Lot # 3215 (Sale Order: 216 of 749)      

Cased Pair of Factory Engraved Colt Model 1851 Navy Percussion Revolvers -A) Colt Model 1851 Navy Revolver

Cased Pair of Factory Engraved Colt Model 1851 Navy Percussion Revolvers -A) Colt Model 1851 Navy Revolver
This cased set contains a pair of Colt Model 1851 Navy percussion revolvers decorated with matching factory engraving. Only a very limited number of Colt revolvers were engraved as pairs overall and these pairs were generally not consecutively numbered. These revolvers are only three numbers apart (nos. 174493 and 174496). The engraving on this Civil War pair from 1863 is in the late percussion vine scroll pattern. This style of embellishment is discussed in the book "The Book of Colt Engraving" by R.L. Wilson and there is a photograph of a Model 1860 Army revolver on page 147 with similar engraving as on these revolvers. The scrollwork covers the frame, rear section of the barrel, and flat sides of the loading lever with flourishes of the pattern on the trigger guard, butt and back strap. There are also floral blossoms among the scrollwork. A fan type motif is engraved behind the hammer. The hammer has the wolf or hound head. The embellishment on the revolvers differ with the type of head motif among the scroll on the left side of the barrel. No. 174493 has a Native American head. No. 174496 has a dog head. The letters "IP," which denote special finishing by the Colt factory, accompany the serial numbers on the main components (barrel, frame, trigger guard, and back strap). The top barrel flat is stamped with the one-line New York address: "-ADDRESS SAML COLT NEW-YORK CITY-" The revolvers have the classic Naval Battle of Campeche cylinder roll-scenes and a brass cone front sight. The left side of the frame is stamped "COLTS/PATENT." The left side of the trigger guard is stamped with the letter "X" and "36 CAL." Each revolver has matching respective full or partial serial numbers on the frame, barrel, trigger guard, back strap, cylinder, loading gate, wedge, and arbor pin. The trigger guard to no. 174493 lacks the last digit. The barrel and cylinder are blued, the brass grip straps are plated in silver, and the hammer and loading lever are color casehardened. The partitioned case is lined in red velvet and contains two cap tins (Eley Brothers and W.&C. Eley), a blued double cavity bullet mold marked "COLTS/PATENT" on the sprue cutter, two packages of six combustible envelope .36 caliber cartridges, replated silver plated double face powder flask with patriotic motif, and lead balls and conical bullets.

Manufacture: Colt
Model: 1851
BBL: 7 1/2 inch octagon
Stock:
Gauge: 36
Finish: blue/casehardened/silver
Grips: antique ivory
Serial Number: 174493
Class: Antique

Condition: Very good plus, with strong amounts of original blue finish on the lower barrel flat and 85% plus original silver plating on the grip straps, otherwise a pleasing smooth gray patina and a series of scratches on the butt. Most of the cylinder scene retains. The engraving is crisp. The grip is very fine with some minor handling marks and highly attractive grain and aged appearance. Mechanically excellent. The refinished, relined to fit case is very good with minor handling/storage marks and faded lining with high spot wear.

B) Colt Model 1851 Navy Revolver
As described in "A."

Manufacture: Colt
Model: 1851
BBL: 7 1/2 inch octagon
Stock:
Gauge: 36
Finish: blue/casehardened/silver
Grips: antique ivory
Serial Number: 174496
Class: Antique

Condition: Very good plus, with strong amounts of original blue finish on the lower barrel flat and 80% original silver plating on the grip straps, otherwise a pleasing smooth gray patina. Most of the cylinder scene remains. The engraving is crisp. The grip is very fine with some minor handling marks and highly attractive grain and aged appearance. Mechanically excellent. A solid representative pair of factory engraved Colt Model 1851 percussion revolvers that will bring added dimension to any Colt percussion or firearms art collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 14,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Model 1860 Army Revolver with Heavy Leaf Scroll Engraving

Lot # 3216 (Sale Order: 217 of 749)      

Excellent Documented Cased, Factory Engraved Colt Model 1860 Army Revolver with Heavy Leaf Scroll Engraving

Factory cased and engraved Colt Model 1860 Army revolver manufactured in 1870. This revolver is pictured and described on page 156 of "The Book of Colt Engraving" by R.L. Wilson. The description states that this revolver was one of 70 shipped to Schuyler Hartley and Graham on April 10, 1877, ten years after the date it was manufactured. The revolver has a full nickel-plated finish with niter blue screws and trigger. The one piece grip is highly figured, fancy grade, walnut with a piano finish. The engraving consists of what R.L. Wilson describes as a "heavy leaf scroll" which consists of large floral patterns on a punchdot background. The cylinder has the usual roll-engraved Texas Navy battle scene and "COLT'S PATENT" markings engraved with a dot and dash border. The sides of the hammer are engraved with a wolf's head motif. A block "E" is stamped either above or below the serial number on the barrel lug, frame, trigger guard and back strap which indicates that the component was designated by Colt for engraving. The hammer spur features the bordered knurling found on late production Model 1860 Army revolvers. The top of the barrel is roll-stamped: "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" in a panel formed by scrollwork. "COLTS/PATENT" is roll-stamped on the left side of the frame in a panel with line and scrollwork borders. "44 CAL" is stamped on the left shoulder of the trigger guard. The full serial number, "187265" is stamped on the bottom of the barrel lug, frame, trigger guard and back strap. The cylinder is stamped with the partial serial number, "265". All of the visible serial numbers match. The mahogany, American style, case has six compartments and is lined with purple velvet. The case contains: (1) 250 count tin of Eley percussion caps for Colt Belt and Pocket pistols with green paper label, (2) two small packages marked for 44-100 "Revolving Holster Pistol" combustible cartridges, (3) blued, bent leg, double cavity, bullet mold marked "COLT'S/PATENT" on the sprue cutter and "44H" on the right block and (4) fixed charger powder flask for Model 1860 Army revolvers embossed on one side of the body with "COLTS/PATENT" above crossed flags, a cannon and military trophies.

Class: Antique

Excellent. The revolver retains more than 90% of the original nickel-plated finish. The deeply cut scroll engraving is crisp. The nickel-plating has some flaking on the edges of the loading lever slot, sides and back of the trigger guard, and inside of the grip strap. There is some flash pitting on the face and sides of the hammer and the percussion nipples. The right end of the cylinder wedge is slightly dented. The highly figured walnut grip retains about 85% of the original piano finish with scattered, minor handling marks. The action is tight and functions well. The exterior of the mahogany case is revarnished and is in fine condition and shows minimal wear. The case-lining is in very fine condition. The lining is clean, has faded slightly and is free from damage. Wear is limited to the expected compression marks from contact with the revolver and accessories. The bullet mold is in fine condition and retains about 85% of the dull blue finish. One of the cartridge packs is open and empty, the other sealed but with loose-sounding contents, both showing mild wear. The cap tin is in good condition. The very good powder flask has sharp embossing and is free from dents and has a dark, un-polished patina; almost no trace remains of the original gilt and brown lacquer finish. This is an excellent example of a scarce factory engraved Colt Model 1860 Army revolver that is probably one of the last factory engraved Model 1860 revolvers manufactured by Colt.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 18,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Cased Pair of Colt Model 1849 Pocket Percussion Revolvers

Lot # 3217 (Sale Order: 218 of 749)      

Exceptional Cased Pair of Colt Model 1849 Pocket Percussion Revolvers -A) Colt Model 1849 Pocket Revolver

Exceptional Cased Pair of Colt Model 1849 Pocket Percussion Revolvers -A) Colt Model 1849 Pocket Revolver
The Model 1849 Pocket saw extensive use throughout the United States in the mid-19th century during the gold rushes, settlement of the West, and the turmoil of the Civil War. As his most popular seller, it was a key model in securing Samuel Colt's fortune and legacy. While the Colt Model 1849 Pocket was the most popular of all 19th century Colt revolvers, they are hard to find in exceptional condition, and double cased Colt percussion revolvers of any model are very scarce. A double cased pair in exceptional condition is essentially unheard of. This extraordinarily fine pair of Colt Model 1849 Pocket revolvers was manufactured in 1854 and is the high condition pair of Colt Model 1849 Pockets ever offered by Rock Island Auction. The revolvers are only 113 serial numbers apart and have clearly rarely been out of their case and likely never fired. They come in a very rare rosewood double case fitted to the pair and also contain two Eley Bros. cap tins, a small single sided eagle powder flask, cartridge pack, blued Colt's patent iron ball and conical bullet mold, five loose cartridges, a few balls and bullets, an L-shaped combination tool, two extra nipples, and a key. Both pistols have the standard markings and features, including matching visible serial numbers. The first pistol also has a "5" on the left side of the barrel lug. The second pistol has a "2" at the same location.

Manufacture: Colt
Model: 1849
BBL: 5 inch octagon
Stock:
Gauge: 31
Finish: blue/casehardened/silver
Grips: varnished walnut
Serial Number: 98514
Class: Antique

Condition: Excellent with 95% plus overall original finish. The barrel has bright original blue, minor edge wear, a small patch of minor surface oxidation, and a few dings by the wedge on the right. The cylinder has some light fading, minor drag lines, and three flattened safety pins on the rear. 97% of the original case colors remain on the frame, and they are particularly bright. The frame has some original flaws at the edges and light handling and storage marks. The grip straps have attractive untouched aged patina on the silver plating. The grip is also excellent and has glossy original varnish and some minor handling and storage marks and dings. Mechanically excellent. The case is very fine and has minor age and storage related wear. The accessories are also very fine to excellent. The mold retains nearly all of the original blue, and the flask has strong original brown lacquer.

B) Colt Model 1849 Pocket Revolver
As described in "A."

Manufacture: Colt
Model: 1849
BBL: 5 inch octagon
Stock:
Gauge: 31
Finish: blue/casehardened/silver
Grips: varnished walnut
Serial Number: 98617
Class: Antique

Condition: Exceptionally fine. The barrel has 95% plus of the bright original blue finish, minor edge wear, and a few light dings on the left. The cylinder has 80% plus original blue finish with some light fading, a crisp roll-scene, minor drag lines, and all but one of the safety pins complete. 75% of the original case colors remain with fading from age to a smooth, mottled gray patina. The grip straps retain 98% plus original silver plating with attractive aged darkened patina. The grip is also exceptionally fine and has glossy original varnish, minimal light handling and storage marks, flaking on the right, and very minor edge wear. Mechanically excellent. This is an absolutely stunning cased set. Very few double cased sets like this exist, and this set is one of the finest we've ever offered at auction.
Provenance: The Don and Carol Wilkerson Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 18,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Cased Pair of Engraved Silver Plated Colt 1860 Army Revolvers

Lot # 3218 (Sale Order: 219 of 749)      

Cased Pair of Factory Engraved Silver Plated Colt Model 1860 Army Percussion Revolvers with Extraordinary Relief Carved Mexican Eagle Grip -A) Colt Model 1860 Army Revolver

Cased Pair of Factory Engraved Silver Plated Colt Model 1860 Army Percussion Revolvers with Extraordinary Relief Carved Mexican Eagle Grip -A) Colt Model 1860 Army Revolver
Each revolver was manufactured in 1865 and feature a matching Colt factory engraving. The engraving is in a vine pattern without shading in the Gustave Young style. Several of the scrolls terminate in floral blossoms. The engraving on the barrel sides extends to the top, terminating just ahead of the one-line New York address. The barrel wedges have a matching engraving. The hammers are engraved with a wolf’s head on both sides of the noses and fish scales on the sides of the spurs. Both revolvers feature serial numbers on the barrel, frame, trigger guard and back strap marked along with the letter “E,” which was used to denote factory engraved revolvers. The left side of the 3-screw frames cut for a shoulder stock have the hand engraved “COLTS/PATENT” in an upward arch. The cylinders have the standard naval scene and are marked “COLTS PATENT.” The left side of the trigger guards are marked "44 CAL." The revolvers feature a full silver plating while the hammers, cylinders and loading levers appear to have a gold wash over the silver. The screws are niter blue. The revolvers wear a fantastic relief carved Mexican eagle grip on the left side of the “A” and on the right of the “B.” This is a true factory pair as “A” no. 154299 and “B” no. 154304 are only 5 numbers a part. “A” cylinder lacks a serial number. “B” cylinder is numbered to a different gun (“4204”, possibly a factory error as ”4204” is also on the wedge). The wedge on “A” is correctly numbered to the gun. Both “A” and “B” have respective matching full or partial serial numbers on the barrel, frame, trigger guard, back strap, and arbor pin. The revolvers are housed in an original partitioned case lined in burgundy velvet and containing a “COLTS/PATENT marked double face trophy of flags and arms silver plated powder flask, silver plated two cavity steel bullet mold marked “COLT’S/PATENT” on the sprue cutter and “44H” on the right side, silver plated “L” shaped combination tool, 2 Eley cap tins, and small container. This set certainly would have made for a fine presentation piece for a Mexican politician or military officer. With the end of the Civil War, President Johnson pressured Napoleon III to back down and unofficially armed the Mexican republicans against Maximilian and the foreign supported Mexican imperial forces. With the withdrawal of French forces, Maximilian was left scrambling to hold power and issued increasingly brutal orders, including a decree calling for the execution of any member of an armed band in a futile attempt to end resistance to his rule. He was captured and executed by firing squad on June 19, 1867. The set would have certainly been a fitting presentation piece for a leader of the "Restored Republic" in 1867-1876.

Manufacture: Colt
Model: 1860 Army
BBL: 8 inch round
Stock:
Gauge: 44
Finish: silver/gold
Grips: antique ivory
Serial Number: 154299E
Class: Antique

Condition: Exceptionally fine, retaining 85% plus original silver plating with general loss on both grip straps and hints of original gold wash on the loading lever, cylinder and hammer. The engraving is crisp. The cylinder retains nearly all of the roll-stamped scene and has some light blistering to the plating. The grip is excellent with some minor handling marks, crisp carving and attractive color and grain. Mechanically excellent. The case is very good with a couple cracks on the lid, minor-moderate handling/storage marks and faded lining showing strong burgundy color under the recesses for the revolvers and implements with typical high spot wear. The replated silver plated powder flask, combination tool and bullet model are all fine.

B) Colt Model 1860 Army Revolver
As described in "A".

Manufacture: Colt
Model: 1860 Army
BBL: 8 inch round
Stock:
Gauge: 44
Finish: silver/gold
Grips: antique ivory
Serial Number: 154304E
Class: Antique

Condition: Exceptionally fine, retaining 90% original silver plating showing general carry and use wear and hints of original gold on the loading lever, cylinder and hammer. The engraving is crisp. The cylinder retains nearly all of the roll-stamped scene. The grip is excellent with some minor handling marks, crisp carving and attractive color and grain. Mechanically excellent. A very desirable, beautiful rare factory engraved, Mexican eagle stocked Model 1860 cased set with accessories likely presented to a high ranking Mexican military officer or politician.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 40,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civilian Colt Model 1860 Army Revolver

Lot # 3219 (Sale Order: 220 of 749)      

Civilian Colt Model 1860 Army Revolver with Tooled Leather Slim Jim Holster

This civilian Colt Model 1860 Army revolver was manufactured in 1868. The revolver has a civilian type three-screw frame with no stock cut-outs in the recoil shield. The barrel, cylinder, trigger guard, and back strap have a high polish blue finish. The loading lever, hammer, and frame are color casehardened. The brass trigger guard is plated in silver. The cylinder is roll-engraved with the Naval Battle of Campeche scene and "COLT'S PATENT." The top of the barrel is roll-stamped with the legend "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" in a single line. "COLTS/PATENT" is stamped in two lines on the left side of the frame. "44 CAL" is stamped on the left shoulder of the trigger guard. Matching serial numbers marked on the barrel, frame, trigger guard, butt, cylinder, cylinder pin, and wedge. With a tooled leather slim Jim holster.

Class: Antique

Very good plus. The barrel retains 30% plus bright original high polish blue finish with a smooth brown-gray patina on the balance. The cylinder retains traces of original blue finish, and the naval scene is crisp overall. 40% original blue finish remains on the back strap. The trigger guard retains 20% original silver plating in and around the protected areas. The frame, hammer, and loading lever retain 30% original case colors. The grip is very fine showing some minor handling marks and retaining most of the original varnish. Holster is very good. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt London Model 1851 Navy Percussion Revolver

Lot # 3220 (Sale Order: 221 of 749)      

Fine Colt London Model 1851 Navy Percussion Revolver

Manufactured at Colt's London factory in 1855. Colt's Model 1851 Navy revolver proved to be very popular in the U.K. initially following the Great Exhibition in London in 1851. Features the large oval steel trigger guard, steel back strap, wide cylinder nipple cut-outs, bordered knurling on the hammer spur, and round head frame and trigger guard screws that are typical of Colt London Navy revolvers. The top of the barrel is roll-stamped "-ADDRESS. COL: COLT, LONDON.-" and London "Crown/GP" and "Crown/V" proof and inspection marks are stamped on the left side of the barrel lug and alternating between each nipple on the cylinder. All matching visible serial numbers.

Class: Antique

Fine, retains 30% plus original blue finish concentrated mostly on the barrel flaking to a smooth brown patina on the balance, 75% vivid original case colors with some slight fading around the recoil shields, a minor manufacturing defect visible at the bottom left edge of the frame, and a defined cylinder scene. Grip is also fine with most of the original varnish finish, numerous scattered scratches and dents, a chip at the bottom right edge, with mostly defined edges. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Pocket Navy 4 1/2 Inch Octagon Barrel Cartridge Conversion

Lot # 3221 (Sale Order: 222 of 749)      

Exceptional Three-Digit Serial Number 163 Colt Pocket Navy 4 1/2 Inch Octagon Barrel Cartridge Conversion Revolver

Only around 2,000 "Pocket Navy" revolvers were converted to the 4 1/2 inch octagon barrel .38 rimfire configuration c. 1873-1875. These revolvers had no ejector attached to the barrel and had their loading lever cutouts filled. On this example the lower portion for the rammer remains open. The top barrel flat is marked "ADDRESS COL. SAML. COLT NEW-YORK U.S. AMERICA." The two-line 1871 and 1872 patent markings are on the left of the frame. "36 CAL" is on the left of the trigger guard, and "COLTS PATENT/No.163" is on the cylinder along with the stagecoach holdup scene. Matching serial numbers are also on the barrel, frame, wedge, trigger guard, and back strap. The arbor and loading gate are marked with the assembly number "117". It has the standard post front sight, hammer notch rear sight, and a smooth, one-piece walnut grip.

Class: Antique

Excellent, retains 95% of the untouched original nickel finish with some scattered light flaking, mostly on the grip straps and edges of the trigger guard, showing the aged mellow brass beneath. The grip is very fine with some scattered minor dings and scratches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Cased English Proofed Colt Model 1862 Police Percussion Revolver

Lot # 3222 (Sale Order: 223 of 749)      

Cased English Proofed Colt Model 1862 Police Percussion Revolver

This revolver was manufactured in 1862 and made its way to England based on the Birmingham proof and view marks on the barrel and cylinder. The other markings and features are standard, including matching serial numbers on the wedge, arbor, barrel, frame, trigger guard, and back strap. It comes in a fitted oak case with navy blue lining, a Colt loading and cleaning label inside the lid, cleaning rod, L-shaped combination tool, ball/bullet mold, cap tin, Hawksley flask, and oiler.

Class: Antique

Fine with 50% plus original blue and 30% casehardened finish, 80% original silver plating, aged patina on the silver and brass, smooth gray and brown patina on the balance, and generally minor overall wear. The revarnished grip is good and has some chips at the corners, a spliced repair at the toe on the left, and some scrapes and dings. Mechanically fine. The case is fine and has mild age and storage related wear, and the accessories are mostly very fine with minor wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt Model 1851 Navy Percussion Revolver

Lot # 3223 (Sale Order: 224 of 749)      

Civil War Era Colt Model 1851 Navy Percussion Revolver

Manufactured in 1864 during the American Civil War with standard markings and features, including matching serial numbers (loading lever blank, wedge renumbered to match).

Class: Antique

Very good with 40% original blue finish on the barrel, patches of original case colors in the protected areas, dark gray and brown patina on the balance of the iron, traces of original silver and otherwise aged patina on the brass grip frame, some mild oxidation and pitting, replacement wedge and screws, and general mild wear. The grip is also very good and has chips at the heel and toe, three "kill notches" on the right at the toe, mild edge wear, and most of the original varnish. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,400.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Colt 3 1/2 Inch Round Barrel Pocket Navy Conversion Revolver

Lot # 3224 (Sale Order: 225 of 749)      

Very Fine Colt 3 1/2 Inch Round Barrel Pocket Navy Conversion Revolver Without Ejector

Manufactured c. 1873-1890, this conversion model is characterized by a 3 1/2 inch round barrel with the Hartford address, 1871 and 1872 patent dates marked frame, lack of an ejector, and lack of a barrel lug plug as the barrels were specifically manufactured for this model and not altered from percussion model surplus. The top of the barrel has the standard two-line address, previously mentioned two-line patent dates on the left of the frame, and "N" and "38 CAL" on the left of the trigger guard. The cylinder is rolled with the standard stagecoach scene. Matching serial numbers are marked on the barrel lug, frame, trigger guard, cylinder ("4434"), and backstrap, and the wedge is numbered "06469". It has the standard pin front sight, hammer notch rear sight, and is fitted with a smooth, one-piece walnut grip.

Class: Antique

Very fine, retains 85% of the untouched original nickel finish with some mild flaking concentrated on the front grip strap and trigger guard, showing the mellow, aged brass beneath. 80% of the vibrant original case colors remain on the sides of the hammer. The grip is very fine with some scattered light scratches and dings, retaining most of the original varnish. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,400.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 9 of 30

1.178.0.836.d2a4bd2.13.190