Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
to bid until the live auction begins!
Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
to bid until the live auction begins!
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 10 of 27

Cased Special Order Engraved Remington New Model Army Revolver

Lot # 1225 (Sale Order: 226 of 674)      

Outstanding Cased Special Order Engraved, Etched, and Silver Plated Remington New Model Army Percussion Revolver

This truly extraordinary New Model Army was likely embellished for presentation or display. The Special Order Department serial number "29" is marked on the left side of the grip frame near the toe and on the backside of the trigger guard and hand-written on the inside of the grips. The number on the bottom of the barrel is mostly obscured by the silver plating but appears to also be "29." Howard Madaus estimated that less than 100 in-house embellished guns were manufactured during the Civil War. Matching or similar cylinder etching is shown on multiple models of Remington revolvers pictured in "The Guns of Remington: Historic Arms Spanning Two Centuries" by Madaus and Goodwin, including two revolvers on page 56. In some examples, the shooter wears a cape/cloak. It features a pinched blade front sight, standard barrel markings with engraved borders, traditional punch dot backed scroll engraving on the rear of the barrel and most of the frame as well as the trigger guard bow, some geometric pattern accents and borders on the barrel and back strap, gadroon patterns along the top strap sight groove and lower front sides of the frame, etched scrollwork on the loading lever, and a detailed etched scene of two men on horseback among trees and one of the men firing a handgun at the other. Some of the patterns are off-center or uneven. An "N" is marked ahead of the lever catch. The back of the cylinder has a "W," and a "J" is on the left side of the trigger guard. A small "1" is also on the left side of the front strap. The strain screw is absent. The screws, cylinder, and loading lever are blued, and the remaining surfaces are silver plated. The mahogany case contains a double sided powder flask with a pair of pheasants and a dog on each side and a slanted spout, an American Powder Co. cartridge box with lead conical bullets inside, R.D. Walker cap tin, and a dual cavity bullet mold.

Class: Antique

Excellent overall with 98% of the original silver plating showing some slight flecking and natural aged patina, 90% plus original blue finish showing some slight fading and cylinder drag lines, minor edge wear throughout, crisp engraving and etching patterns, slight shrinkage of the grips which show a slight check on the right and appropriate age and handling related discoloration, and minor handling and storage wear. Mechanically excellent. The case and accessories are very good with mostly storage wear, including some staining and discoloration of the case lining and a cracked divider. This is a gorgeous and incredibly scarce example of the Remington Special Order Department's work complete with a case and accessories. These Special Order Department guns are rarely available and are missing from many of the most advanced Remington collections. Chances to acquire one of these pieces in this high level of condition and special order features is most likely seldom offered in a lifetime.

Provenance: The Robert M. Lee Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 22,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

E. G. Lamson & Co. Palmer Bolt Action Saddle Ring Carbine

Lot # 1226 (Sale Order: 227 of 674)      

Outstanding Civil War Era E. G. Lamson & Co. Palmer Bolt Action Saddle Ring Carbine

The Palmer carbine was patented in 1863 and holds the distinction of being the first metallic cartridge bolt action firearm ever adopted by the U.S. Ordnance Department. The bolt on this design is used to seat the cartridge and seal the breech. It fires with a traditional side lock. Approximately 1,001 of these carbines were ordered by the U.S. government, but they arrived one month too late to see action during the Civil War. This carbine has small "M.M" (Miles Moulton) inspector initials on the left of the breech, left stock flat and top of the stock, and a script "MM" cartouche on the left stock flat.

Class: Antique

Excellent plus as issued condition with outstandingly fiery case colors and very minor handling and storage type marks. The wood is equally excellent plus and has a extraordinarily crisp cartouche, stunning raised grain, smooth oiled finish, and only some slight flaking at the edges of the heel and toe. Mechanically excellent. This is the most attractive Palmer Civil War Carbine we have catalogued!

Provenance: The Bob Noske Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 7,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. Contract Gibbs Breech Loading Percussion Carbine

Lot # 1227 (Sale Order: 228 of 674)      

Outstanding, One of the Finest known Civil War U.S. Contract Gibbs Breech Loading Percussion Carbine

The Gibbs carbine is one of the scarcest and best designed carbines used by Union forces. Only 1,052 Gibbs carbines were manufactured by William F. Brooks of New York City at the Phoenix Armory and delivered to the U.S. government in 1863 due to the factory being burned down during the New York Draft Riots that same July. Around 500 of these were issued to the 10th Missouri Cavalry and smaller quantities were issued to the 13th and 14th New York Cavalry. This example has a blade front sight, three-leaf rear sight marked "B" on the left, additional "B" markings on other components including the stock ahead of the "U.S" marked buttplate tang, the Gibbs patent marking on top at the breech, a spread wing eagle design behind the hammer on the distinctive long lock plate, "WM F. BROOKS/MANFR NEW YORK/1863" ahead of the hammer, a saddle ring on the left, and a smooth walnut stock.

Class: Antique

Excellent with 95% plus original blue and vivid casehardened finish, some minor production flaws such as the textured patch on top of the breech, and generally only minor handling and storage marks on the metal and wood. Mechanically excellent. Gibbs carbines are already difficult to come by, and this is clearly the finest example we have had the pleasure of cataloging.

Provenance: The John R. McMurray Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 16,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. Ball & Williams Ballard Carbine

Lot # 1228 (Sale Order: 229 of 674)      

Outstanding Civil War U.S. Martially Inspected Ball & Williams Ballard Carbine

Ball & Williams were originally contracted to manufacture 5,000 of these carbines in January 1864 but ultimately only delivered 1,500 before abandoning the contract in favor of better profits received from contracts for the Kentucky cavalry. Of the 1,500 delivered to the federal government, 1,200 were issued to the Vermont militia after the St. Albans Raid, the northernmost land battle of the war. This example appears to have seen little, if any, use at all and is likely one of a very select few that was not issued and most likely instead sat in government storage. It features a blade front sight, standard notch and folding leaf rear sight, Ballard patent markings on the right side of the frame, Ball & Williams and Merwin & Bray markings on the left of the frame, "M.M" inspection initials on various components, "H" inspection mark on top of the stock ahead of the buttplate tang, and a circled script "MM" cartouche on the left of the stock.

Class: Antique

Excellent plus, nearly as issued, with 95% plus original blue finish with some flaked finish and mostly crisp markings, minimal wear, and some slight oxidation. The wood is also excellent plus and has an exceptionally crisp cartouche, some minor bruising by the barrel band, slight flaking at the toe, and light scratches. Mechanically excellent. One of the finest ever brought to market!

Provenance: The John R. McMurray Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 10,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Kentucky Marked Triplett & Scott Carbine

Lot # 1229 (Sale Order: 230 of 674)      

Outstanding Civil War Kentucky Marked Meriden Manufacturing Co. Triplett & Scott Repeating Rimfire Carbine

The Triplett & Scott carbines were manufactured by the Meriden Manufacturing Company, Meriden, Connecticut, in 1864-1865. 2,000 22-inch barrel carbines were manufactured as part of a contract for 5,000 weapons with the State of Kentucky in 1865. The carbine features a seven-round magazine and is loaded by twisting the barrel to align with the magazine on the lower left side of the receiver. The carbine has a folding leaf rear sight which lacks elevation markings. Sling swivels on both the toe and heel of the stock. The left side of the chamber is stamped "KENTUCKY" in small block letters indicating the carbine was part of the 5,000 piece state contract. The serial number is stamped on the right side of the frame. The lower left side of the frame is marked with the manufacturer's name and location: "MERIDEN MAN'FG. CO./MERIDEN, CONN." in two lines. The patent marking: "TRIPLETT & SCOTT/PATENT DEC. 6, 1864" is stamped in two lines on the upper receiver tang. "Y/W.R" is stamped on the left side at the butt.

Class: Antique

Excellent with 95% plus original blue, 90% plus original case colors, and minimal light wear. The wood is exceptionally fine and has smooth oiled finish, a very small flake at the magazine tube, and minor scratches. Mechanically excellent. We cannot recall a finer example!

Provenance: The Ralph Arnold Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 5,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. Spencer Model 1860 Army Repeating Rifle

Lot # 1230 (Sale Order: 231 of 674)      

Exceptional Civil War U.S. Spencer Model 1860 Army Repeating Rifle

This is an exceptional example of a Spencer Model 1860 Army rifle that was manufactured by the Spencer Repeating Rifle Company of Boston, Massachusetts. Reportedly, 11,470 of these innovative rifles were delivered to the U.S government between the end of 1862-1864. The Spencer rifles and carbines were the most successful repeating long arms manufactured during the Civil War. Rifles of this model typically saw hard use, and were carried by Colonel Wilder's "Lightning Brigade" at Hoover's Gap and General Custer's Michigan "Wolverines" at Gettysburg. The rifle features a 30-inch round barrel, seven-shot magazine tube in the stock, a brass blade front sight that doubles as a bayonet lug, an 800 yard folding ladder rear sight, six-groove rifling chambered for use with 56-52 "52 Spencer" rimfire, three barrel bands, the three-line Spencer address and patent marking on top of the breech, and smooth buttstock. The matching serial number "9531" is roll-stamped on the top of the receiver behind the ejector cut-out and on the bottom of the barrel. "J.W.CLAPP" stamped on the rear surface of the walnut forend. Two boxed script "HHH" and "DAP" (Dwight A. Perkins) inspection cartouches stamped on the left of the buttstock behind the rear lock screw. The rifle barrel has a military blue finish and the forearm cap, barrel bands, receiver, hammer, trigger, lever and crescent buttplate are color casehardened.

Class: Antique

Exceptionally fine, retains 75% plus original blue finish with scattered light handling marks on the barrel showing smooth gray patina on the balance, 70% original case colors slightly muted on the exposed surfaces with a vivid appearance in the protected areas, and sharp markings and edges in the metal overall. The wood is very fine with attractive original raised grains and rich oil finish, scattered dents and scratches, clear cartouches, and distinct edges. Mechanically excellent. This exceptional U.S. inspected Spencer Model 1860 Army repeating rifle has seen little use, and is in a high state of condition when compared with most of the limited surviving examples today, making it a highly desirable specimen for any Civil War arms collector!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 14,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Martially Inspected First U.S. Contract Civil War Henry Rifle

Lot # 1231 (Sale Order: 232 of 674)      

Highly Desirable Martially Inspected First U.S. Contract Civil War New Haven Arms Company Henry Lever Action Rifle

This Henry lever action rifle was manufactured by the New Haven Arms Co., in 1863. This rifle is one of the 800 Henry rifles purchased by the Ordnance Department on December 30, 1863 to arm the 1st D.C. Cavalry regiment. The 1st D.C. Cavalry was the only Federal unit entirely armed with Henry rifles during the Civil War. Commanded by politically connected Col. Lafayette Baker, the 1st D.C. Cavalry initially served on provost duty in the District of Columbia under the direct orders of Secretary of War Edwin Stanton and was assigned to combat Confederate partisan rangers operating in Northern Virginia. In May 1864, the regiment was reassigned to the Department of Virginia and saw action in operations around Richmond and Petersburg. The 1st D.C Cavalry was present when the Army of Northern Virginia surrendered at Appomattox Court House on April 9, 1865. During these battles a significant number of Henry rifles were captured or lost in action. Some captured 1st D.C. Cavalry Henry rifles were apparently used by the body guard of Confederate President Jefferson Davis when he fled Richmond during the last days of the Civil War. The 800 Henry rifles purchased for the 1st D.C. Cavalry under the December 30, 1863 contract are the only Henry rifles fully marked with Ordnance final inspection and sub-inspection marks. Although the Ordnance Department purchased an additional 627 Henry rifles in April and May 1865 to arm the 3rd U.S. Veteran Volunteer Infantry regiment, the 1865 contract rifles did not have Ordnance inspection marks and saw no action in the Civil War. This rifle has all of the features found on the 1863 production rifles purchased for the 1st D.C. Cavalry. The barrel and integral 15-shot magazine have a the second style front sight with nickel-silver square back blade and third pattern folding leaf rear sight with "900" yard marking below the sight notch on the top of the leaf. The magazine has the second pattern, large, brass follower and the follower slot on the bottom of the receiver has milled flats to accept the larger follower. The distinctive brass receiver is the second pattern introduced about serial number 3100 that lacks the alternate rear sight dove-tail. The first style buttplate has a rounded heel and hinged brass butt-trap door. The stock is correctly not fitted with a sling swivel and the left side of the barrel lacks the screw-fastened loop for a sling hook (most 1st D.C. Henry rifles were not fitted with sling swivels and loops which were special order items; the rifles were carried in a leather scabbard manufactured by the Washington Arsenal specifically for the 1st D.C. Cavalry). The top barrel flat is roll-stamped with the correct, first style legend: "HENRY'S PATENT. OCT. 16. 1860./MANUFACT'D BY THE NEWHAVEN ARMS.CO. NEWHAVEN. CT.". The two line legend has serifed (Roman) letters for all the markings except the second "NEWHAVEN" which is stamped in non-serifed (Gothic) letters and is approximately 2-17/32 inches long. The second style marking introduced in the late 3000 serial number range is larger and has all serifed letters. The right barrel flat is stamped with the "C.G.C" initials of Ordnance Sub-Inspector Charles G. Chapman. An Ordnance final inspection mark consisting of the script initials "CGC" with an oval border is visible on the right side of the stock wrist. A single "C" sub-inspection mark is stamped between the receiver and the "C.G.C.." mark on the right side of the barrel and two "C" sub-inspection marks are stamped on the right side of the receiver adjacent to the barrel markings. "C" sub-inspection marks are also stamped on the right side of the buttplate heel and on the right side of the stock neat to the buttplate. The rifle serial number is stamped: (1) on the top barrel flat between the rear sight and the receiver, (2) on the lower left side of the receiver tang, (3) in the upper tang inlet of the stock, (4) on the inside of the buttplate heel and (5) on the shanks of both the hand-fitted buttplate screws. All of the visible serial numbers match. The tang screws are typically not serial numbered on Henry rifles above serial number 3100.

Class: Antique

Very good plus. The rifle is all original and has all of the correct markings and features found on the 800 U.S. Contract Henry rifles purchased to arm the 1st D.C. Cavalry. The rifle shows wear consistent with a weapon that was issued and saw combat. Traces of original blue finish remain on the barrel/magazine with the balance a gray-brown patina visible with sharp edges and crisp legend, serial number and inspection marks. There are a number of old dents and what appear to be vice marks on both sides of the forward swiveli
more... Provenance: The Joe Marlin Hilliard Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 30,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Confederate Spiller & Burr Percussion Revolver

Lot # 1232 (Sale Order: 233 of 674)      

Very Scarce and Desirable Civil War Confederate Spiller & Burr Percussion Revolver

Around 700 Spiller & Burr percussion revolvers were manufactured in Atlanta, Georgia, circa 1862-1864. Around another 700 were manufactured at the Macon Armory after the firm was purchased by the Confederacy in January of 1864. Production started with a very optimistic government contract of about 15,000 revolvers in 1862. Production stopped in November 1864 due to Sherman's March to the Sea. The revolver is patterned after the Whitney's Navy Model and has a distinctive solid brass frame. The brass frame and trigger guard were polished brass, and the remaining surfaces were blued. "C.S" is stamped on the lower right side of the frame at the front. It features a post front sight, frame groove rear sight, six-shot cylinder with safety notches between the nipples like the Remington revolvers, and smooth walnut grips. The cylinder has the spiral twist visible in the metal which is similar to Damascus twist in shotgun barrels of the period; a feature noted in authentic revolvers. The bottom of the barrel and the butt are stamped "1196," and the inside of the grips are hand marked "1196." The loading lever is marked "18 59" with a faint number in the middle that appears to be another "8" and has a "0" further forward.

Class: Antique

Very good for a Confederate weapon with attractive aged patina on the brass frame and trigger guard, dark brown patina on the balance of the metal along with mild oxidation/pitting, replaced loading lever/cylinder pin, and moderate overall wear. There is some solder visible at the front face of the frame. The sanded and re-oiled grips are good, and there is a chip on the top right. Mechanically functions, although slightly out of time.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 11,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Confederate Texas Star Inlaid Civil War Lefaucheux Revolver

Lot # 1233 (Sale Order: 234 of 674)      

Confederate Texas Star Silver Inlaid Civil War Era Belgian Lefaucheux Single Action Pinfire Revolver with Texas Pin and Holster

This Lefaucheux revolver has an eye-catching period silver inlaid Texas star on the left grip panel that consists of "TEXAS" spelled out around a circled "CS" marking of the Confederate States, and is accompanied by a period holster with an embossed star, presumably for Texas, on the flap and a silver Texas star pin. The pair definitely appear to have grown together, with an unmistakable Texas aura. One may never come across another set like it. Lefaucheux revolvers were one of the few handguns used by both the North and South during the Civil War that used self-contained metallic cartridges. Due to having limited manufacturing capabilities, the Confederacy relied heavily on importing guns from France, Belgium and England, although there is minimal shipping records to be able to confirm numbers on many of these shipments with many labeled as "merchandise" or "hardware" to avoid capture, and many shipments intercepted by the Union blockade. Lefaucheux revolvers were also purchased and used by European militaries and are considered to be the first metallic cartridge handguns officially adopted by any national military. This example has a blade front sight, hammer notch rear sight, smooth walnut grips with the mentioned silver inlaid Texas star on the left, "H" carved twice on the right, lanyard ring, E. Lefaucheux Brevete markings on the left side of the barrel at the breech with a "crown/JL" marking on the right, serial number "3007" on the left of the frame, and faint circled "E/LG" proof on the cylinder. A similar example of this pattern of Belgian made "Lefaucheux Brevete" Model 1854 type revolver is pictured in plate 2-57 on page 73 of the book "Systeme Lefaucheux" by Chris Curtis, in which it has a slightly different construction from the French made Lefaucheux Model 1854 revolvers of the same time period.

Class: Antique

Good, full of Texas character, with mostly smooth brown patina, the casehardened frame showing half silvery-gray patina, and general mild wear. Grips are also good, with an absent section at the top leading edge of the left panel, scratches, dents, carvings as mentioned, and attractive untouched aged patina on the silver Texas star. Absent loading gate. Mechanically very good. Holster is fair with general age related cracking and wear typical of Texas issue, with an absent flap retainer. Texas pin is very good with a darkened tarnished appearance, and an absent section of the "E" letter. This is one of the neatest Lefaucheux revolver sets this writer has ever seen. This is a must have for any Texas arms collector!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Era Second Model LeMat Percussion Revolver

Lot # 1234 (Sale Order: 235 of 674)      

Civil War Era Second Model LeMat Percussion "Grape Shot" Revolver

The LeMat revolver was patented in 1856 by Dr. Jean Alexandre Francois LeMat of New Orleans, Louisiana, and was a very distinctive handgun that combined a nine-shot .42 caliber percussion revolver with a 16 gauge smoothbore grapeshot barrel. The grapeshot barrel served as the center axis for the cylinder. During the Civil War, the Confederate government awarded contracts for 900 LeMat revolvers for the Army and 600 revolvers for the Navy. Total production of LeMat revolvers in Liege, Paris, and London was less than 2,900 between 1856 and 1865. Many senior Confederate officers, most notably cavalry commander General J.E.B. Stuart, carried LeMat revolvers. The Second Model, Paris made, LeMat revolvers had a full octagon upper barrel with a loading lever mounted on the left side, rounded trigger guard with no spur, pull-out assembly latch, butt with a lanyard ring hole and hammer with center mounted pivoting striker. In the upper position, the striker engages the percussion nipples in the cylinder, and, it contacts the percussion nipple for the shot barrel in the lower position. The top of the barrel is engraved "Col Le Mat Bte. s. g. d. g. Paris" in Old English style script. The right barrel flat is stamped with the serial number, "1620", followed a star above the letters "LM" for LeMat. The serial number is also stamped on the right side of the loading lever, on the right side of the frame below the cylinder and on the side of the cylinder. A small case is included containing a few conical bullets and some buckshot.

Class: Antique

Good with a few small traces of original blue finish in the protected areas and otherwise mottled gray and brown patina and mild pitting throughout. The markings remain generally distinct. The hammer and striker are chipped. The grips are also good and have distinct checkering and mild scratches and dents. Mechanically functions, although the revolver work only when muzzle is pointed downward.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 9,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Confederate Inspected London Armoury Co. Kerr Patent Revolver

Lot # 1235 (Sale Order: 236 of 674)      

Desirable Civil War Confederate Inspected London Armoury Co. Kerr Patent Percussion Revolver

Approximately 11,000 of these Kerr patent revolvers were manufactured by the London Armoury Company between 1859 to 1866, and many were known to have been exported for use by the Confederacy during the American Civil War, with some stopped by the Union blockade. These revolvers were well regarded by the men who carried them. This example has the desirable "JS/anchor" stamped on the front of the grip, found on known Confederate issued examples. The Kerr revolver's cylinder can be rotated by pulling the trigger, but the hammer must be cocked manually and also revolves the cylinder when it is. The use of an older style back action percussion lock meant that these revolvers were easier to work on and repair than more complicated revolver actions. "L.A.C" London Armory Company marking followed by "crown/GP" and "crown/V" proofs on the upper left barrel flat, "LONDON/ARMOURY" marked on the left of the frame, "KERR'S PATENT. 3763." on the right of the frame, "LONDON ARMOURY." on the lock plate, "3763" and London crown proofs marked on the outside of the cylinder, "D945" marked on the frame under the cylinder, "945" faintly marked on the front face of the cylinder and inside of the trigger guard.

Class: Antique

Very good with strong traces of the original blue finish in protected areas, scattered mild freckling, some scattered patches of light pitting, and legible markings. The grip is fine and has fairly crisp checkering with a few small nicks and handling marks. Mechanically functions fine although cylinder slightly loose on the lock up.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

High Bid: USD 3,250.00

You've been outbid  by B****n! by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. Remington "Model 1863 Zouave" Rifle

Lot # 1236 (Sale Order: 237 of 674)      

Exceptional Civil War U.S. Remington "Model 1863 Zouave" Percussion Rifle

12,501 of these rifles were reportedly ordered from Remington by the Ordnance Department between 1862-1865 during the Civil War for the Union. Government records listed them as "Harpers Ferry Pattern" rifles, and they have similarities to both the Model 1841 and Model 1855 rifles that were manufactured at Harpers Ferry prior to the Civil War but are of a unique pattern. The Model 1863 "Zouave" nickname is of unclear origins, and whether or not any of these rifles saw use in the war remains unclear, although they are still considered to be a secondary issue Civil War arm. "1863" dated lock and barrel. "R.K.A." (Remick K. Arnold) inspection initials marked on the left barrel flat at the breech. Boxed script "BH" (Benjamin Hannis) inspection cartouche stamped on the left stock flat. The brass patch box contains an extra nipple and ball extractor tool.

Class: Antique

Exceptionally fine, retains 90% plus original blue finish on the barrel with some light handling marks and scattered spotting, 90% attractive original case colors on the lock and hammer with minor fading, and sharp markings and edges in the metal overall. The brass exhibits a pleasing golden bright and aged patina. Stock is very fine with distinct edges, a few light scratches and handling marks, and a crisp cartouche. Mechanically excellent. An exceptional example of a Remington "Zouave" rifle that would make a fine addition to any U.S. Civil War firearms collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Era Tower 1853 Enfield Rifle-Musket with Bayonet

Lot # 1237 (Sale Order: 238 of 674)      

Exceptional Civil War Era Tower Pattern 1853 Enfield Percussion Rifle-Musket with Bayonet

The lock is marked "1863/TOWER" at the center and St. Edward's Crown without the "VR" below at the rear indicating this was a commercial arm, not one accepted by the British government. Many British companies exported rifles for use by both the Confederacy and the Union during the American Civil War. In fact, the Pattern 1853 "Enfield" is said to be the second most widely used rifle of the war. Solid front sight that doubles as a bayonet lug, and 900 yard ladder rear sight. The barrel has the standard double 25 bore size marks indicating .577 caliber. Small letters "R&WA/J.J" stamped on the left stock flat. Includes a socket bayonet and a leather scabbard with brass ends.

Class: Antique

Exceptionally fine, retains 85% plus original blue finish with some light flaking on the bands and smooth brown patina on the balance, 70% muted case colors visible on the lock, and sharp markings and edges in the metal overall. Brass exhibits a pleasing untouched golden aged patina. Stock is excellent with attractive original raised grains and rich oil finish, crisp stamping, a few light dings and handling marks, and distinct edges overall. Mechanically excellent. Bayonet and scabbard are both fine. This exceptional Pattern 1853 Enfield rifle-musket would be difficult to improve upon and is a must have for any Civil War collection!

Provenance: The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Gwyn & Campbell Type II Breech Loading Percussion Carbine

Lot # 1238 (Sale Order: 239 of 674)      

Exceptional Civil War Gwyn & Campbell Type II Breech Loading Percussion Saddle Ring Carbine/Union Rifle

Gwyn & Campbell manufactured around 8,200 of Type I and Type II carbines in 1863 and 1864, and the carbines were primarily issued to a variety of Midwestern units during the Civil War. This one has the standard Type II markings and features. Matching serial numbers are visible on the bottom of the barrel, frame, and breechblock. A boxed script "WHR" cartouche is on the left side of the wrist, and small "WHR" inspection initials are on the top of the stock ahead of the buttplate tang. There are also some "R" inspection marks on various components. The right side of the frame has "UNION/RIFLE", and the lock plate has "GWYN & CAMPBELL" in an arch over "PATENT/1862/HAMILTON. O".

Class: Antique

Excellent with 95% plus of the original blue finish, 85% plus vivid original case colors, some storage marks. 70% original nitre blue remains on the breechblock and tang. The wood is also excellent and has a few scratches and dents and a very crisp cartouche. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

U.S. Contract Spencer Model 1865 Repeating Carbine

Lot # 1239 (Sale Order: 240 of 674)      

Very Fine U.S. Contract Spencer Model 1865 Repeating Carbine

23,000 of these Model 1865 carbines are estimated to have been manufactured in 1865 and 1866. This carbine has the Stabler cut-off and the standard manufacturer markings and features, including "EAW" and "DAP" cartouches on the left side of the stock and "DAP" stamp ahead of the buttplate tang. It also has German "crown/V" markings on top of the barrel and receiver at the breech indicating it was later sold in Germany and marked with the "vorrat" proof. This may have been one of the surplus arms sold to the French for the Franco-Prussian War and subsequently captured by the Prussians.

Class: Antique

Very fine overall with 85% plus original blue and casehardened finish, light fading, particularly vibrant case colors on the hammer, some minor chipping around the inlet edges, light scratches and dings, and crisp markings on the excellent wood including the cartouches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

U.S. Inspected American Machine Works Smith Patent Carbine

Lot # 1240 (Sale Order: 241 of 674)      

Excellent U.S. Inspected American Machine Works Smith Patent Percussion Carbine

This Smith carbine was manufactured by American Machine Works in Springfield, Massachusetts, early in the Civil War. Most of these carbines were purchased by the government and issued to cavalry units. It utilized a special 50 caliber percussion cartridge which sealed the break action leading to higher pressure and thus velocity than the bullets fired from muzzle loading weapons. The carbine has a blue part round, part octagon barrel with dovetail mounted German silver front sight blade and folding leaf rear sight. The left side of the casehardened receiver is fitted with a sling bar and ring for a cavalry carbine sling. The stock and forearm are oil finished walnut. The Smith patent markings are stamped on the left side of the receiver under the sling bar. The three line Poultney & Trimble address is stamped near the top, and the three line American Machine Works address is located above the sling bar. The serial number is located on the two hinge components. The left side of the stock wrist is stamped with "JH" and "LFR" cartouches. "LFR" is stamped on the left barrel flat at the breech.

Class: Antique

Very excellent. The carbine retains 95% of the original blue finish and 90% of the original case colors. The barrel band has a deep brown patina as does the buttplate which has pitting/oxidation near the top. The wood is also excellent with crisp cartouches, a few minor handling and storage marks, and minor scratches. The action is excellent, and the markings are clear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. E.G. Lamson & Co. Ball Repeating Carbine

Lot # 1241 (Sale Order: 242 of 674)      

Extraordinary Civil War U.S. E.G. Lamson & Co. Ball Repeating Carbine

Only 1,002 of these carbines were manufactured by Lamson & Co. of Windsor, Vermont. Delivery was accepted in May 1865 at the end of the Civil War. They would have been one of the more advanced weapons of the war had they been introduced earlier. The magazine under the barrel holds seven cartridges, and the action operates somewhat similar to the famous Spencer carbines. This extraordinary example has all of the classic markings and features, including a "GGS" cartouche on the left side of the wrist and "GGS" stamps on the bottom of the forearm and on the buttplate ahead of the heel buttplate screw.

Class: Antique

Excellent plus, nearly as issued with 98% plus vibrant, highly attractive original case colors, 98% plum blue finish, and only the faintest handling and storage wear. The wood is also excellent plus and has a crisp cartouche, distinct markings, smooth oiled finish, slight edge wear, and attractive raised grain. Mechanically excellent. This is certainly one of the absolute finest Ball carbines extant!

Provenance: The Bob Noske Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 6,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Indian Wars Era U.S. Spencer-Burnside 1865 Carbine

Lot # 1242 (Sale Order: 243 of 674)      

Exceptional Indian Wars Era U.S. Inspected Spencer-Burnside Contract Model 1865 Repeating Saddle Ring Carbine

The Burnside Rifle Co. manufactured these Spencer Model 1865 carbines circa 1865-1866, serial numbered in the approximate range 1-23000, chambered for use with 56-50 "50 Spencer" rimfire. Many of these Spencer carbines were issued by the U.S. Army in the American West during the Indian Wars, seeing various conflicts with Native American tribes until they were replaced by the Springfield Trapdoor rifles and carbines. Plenty still saw continued use out West until the end of the 19th century. The top of the receiver has the four-line address/patent date and Burnside Rifle Co. marking along with "MODEL/1865". The left of the stock is stamped with a crisp boxed script "ESA" (Erskine S. Allin) inspection cartouche. It has a ladder rear sight graduated to 900 yards, saddle ring mounted on the left of the stock, and is equipped with the Stabler cut-off. Matching serial number "33273" marked on top of the receiver and bottom of the barrel. Most of these Model 1865 Spencer carbines saw hard use out west, with this being an exceptional example that somehow saw minimal use.

Class: Antique

Exceptionally fine, retains 75% plus original blue finish on the barrel with smooth brown patina on the balance, 85% vivid original case colors, some scattered light to mild surface freckling, with sharp markings and edges in the metal overall. The front sight blade has been filed down. Wood is very fine with rich oil finish, a few light handling marks, a crack behind the lock, a few small chips on top behind the receiver, defined edges and a crisp cartouche. Mechanically excellent. This exceptional Burnside Spencer Model 1865 carbine would make a fine addition to any U.S. military firearms collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Era Butterfield Army Model Revolver

Lot # 1243 (Sale Order: 244 of 674)      

Very Scarce Civil War Era Butterfield Army Model Percussion Revolver

The Butterfield Revolvers were manufactured by Jesse Butterfield of Philadelphia, Pennsylvania, in 1862. They are considered by collectors to be secondary U.S. martial handgun since they were manufactured in anticipation of an unrealized government contract. Because no contract was awarded, production was limited to only about 640 revolvers. It is equipped with a special disc priming device loaded by loosening a thumb-screw in front of the trigger guard. The top strap is marked "BUTTERFIELD'S/PATENT DEC 11. 1855/PHILADA". The matching serial number "521" is visible on various components.

Class: Antique

Very good with the brass showing an attractive golden aged patina, a few traces of original silver finish visible in some of the protected areas, replacement section on the tip of the hammer (slightly short, does not make contact with the cylinder nipple) and scattered light to mild pitting and freckling on the iron surfaces with gray and brown patina. The refinished grips are good, with scattered light scratches and dents, and a crack visible on the butt of the left grip. Mechanically fine.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

High Bid: USD 4,000.00

You've been outbid  by b****5! by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War New Jersey Contract Remington New Model Army Revolver

Lot # 1244 (Sale Order: 245 of 674)      

Fine Civil War New Jersey Contract Remington New Model Army Percussion Revolver

The left side of the barrel is marked "N.J" indicating this is one of only approximately 1,000 New Model Army revolvers purchased by the State of New Jersey for issue to state militia during the Civil War. The revolver lacks the final inspection cartouches on the grips that were applied to the U.S. contract Remington revolvers, with these New Jersey contract revolvers considered far more scarce. The octagon barrel is fitted with the late style front sight blade, with a threaded "pinched" blade front sight and top strap groove rear sight. The top of the barrel is roll-stamped "PATENTED SEPT. 14. 1858/E.REMINGTON & SONS.ILION NEWYORK.U.S.A./NEW-MODEL" in three lines. Single letter sub-inspection marks located on various components. Serial number "86340" marked on the underside of the barrel, left of the grip frame, trigger guard lug (hidden, requires disassembly), and faintly handwritten on the underside of both grip panels. Cylinder is unnumbered.

Class: Antique

Fine, retains 70% original blue finish flaking to a smooth brown and gray patina on the balance, with scattered mild freckling and defined markings and edges in the metal. Grips are very fine with a few small nicks and light handling marks, and distinct edges. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,900.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War U.S. Contract Starr Arms Co. Model 1863 Revolver

Lot # 1245 (Sale Order: 246 of 674)      

Attractive Civil War U.S. Contract Starr Arms Co. Model 1863 Single Action Percussion Revolver

The Starr Arms Co. Model 1863 Army revolver was one of the most widely issued revolvers of the American Civil War alongside the Colt Model 1860 Army and the Remington New Model Army. This revolver from c. 1864 has the standard Starr markings along with U.S. Ordnance inspection marks.

Class: Antique

Very fine with 75% plus of the bright original high polish blue finish remaining, some fading to smooth brown patina, vibrant original case colors on the loading lever and hammer, drag lines, and general minor age and storage related wear. The refinished grip is very fine and has minor marks and scratches. Mechanically excellent. A very attractive example of the classic Starr Model 1863 Army Revolver from the Civil War.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Citizens Association of Chicago Remington New Model Army

Lot # 1246 (Sale Order: 247 of 674)      

Citizens Association of Chicago Marked E. Remington & Sons New Model Army Cartridge Conversion Revolver

"C.A.315" stamped on the right of the frame ahead of the cylinder, reportedly one of approximately 400 of these revolvers marked for the "Citizens Association" of Chicago, which was a council formed in 1874 after the second Chicago fire to enforce reforms demanded by insurance underwriters for fire protection in the city. These markings are further explained in the second quarter of 2017 Remington Collectors Journal. The New Model Army was manufactured from 1863-1875. In 1868, Remington began converting percussion revolvers for use with metallic cartridge, skirting by the Rollin White patent issue through a partnership with Benjamin Kittredge who paid Smith & Wesson $1 for each converted revolver. Faintly visible boxed script inspection cartouche stamped on the left grip. Matching serial number "142009" marked on the bottom of the barrel, inside of the trigger guard (requires disassembly for viewing), and left of the grip frame. "245" is also marked on the bottom of the barrel, left of the grip frame, and faintly handwritten on the underside of both grip panels.

Class: Antique

Very good, retains 40% original high polish blue finish with areas flaking to smooth brown and gray patina on the balance, freckling and some patches of light pitting. The brass trigger guard retains an attractive golden patina. Grips are also very good with scattered scratches, dents and small chips. Mechanically fine.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,600.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Starr Arms Co. Model 1863 Army Percussion Revolver

Lot # 1247 (Sale Order: 248 of 674)      

Outstanding Civil War Starr Arms Co. Model 1863 Army Revolver

Model 1863 Army Revolver manufactured by the Starr Arms Co. of New York, New York, c. 1863-1865 as part of the approximately 25,000 arms purchased under contract with the Ordnance Department. The single action revolver has a high polish blue finish on the barrel, six-shot cylinder, frame, trigger guard and back strap. The hammer and loading lever have a color casehardened finish. The frame screws have a fiery, niter blue, finish. The one-piece walnut grip is oil finished. The round barrel has a dove-tail mounted steel half-moon front sight. The top of the hammer has a groove that serves as the rear sight. The right side of the frame is roll-stamped: "STARR'S PATENT JAN. 15, 1856" in one line below the cylinder. "STARR.ARMS. Co. NEW. YORK." is roll-stamped on the opposite side of the frame. Single letter "B, C" and "M" Ordnance sub-inspection marks are stamped on most components. The lower left side of the grip is stamped with the Ordnance Sub-Inspection mark which consists of three script initials with a rectangular border. The Ordnance final inspection mark consisting of three script initials with a rectangular border is stamped on the lower right side of the grip. The serial number is stamped on the side of the cylinder and in the frame hammer slot. The Starr Arms Co., was the Ordnance Department's third largest supplier of revolvers during the Civil War; only Colt and Remington produced more revolvers under government contracts.

Class: Antique

Excellent. The revolver appears to be in as-issued and un-fired condition, showing only limited storage and handling wear. The barrel, cylinder, frame, grip straps and trigger guard retain 90% plus of original high polish blue finish. Wear is limited to scattered flaking on the top strap, sides of the frame adjacent to the grip, grip straps and the bottom of the trigger guard. The loading lever and hammer have nearly all of the casehardened finish with vivid case colors. The frame screws retain nearly all the fire blue finish and are free from screw-driver marks. The grip is excellent with light but legible Ordnance inspection marks. This is an outstanding example of an important Federal cavalry revolver that is a key piece in any comprehensive collection of Civil War handguns.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,750.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Mass. Arms Co. Maynard Primed Belt Revolver

Lot # 1248 (Sale Order: 249 of 674)      

Exceptional Factory Engraved Mass. Arms Co. Maynard Primed Belt Revolver with Hand Revolved Cylinder

When the U.S. District Court for the Southern District of Massachusetts granted Samuel Colt an injunction against Mass. Arms Co. in 1851 that prevented them from making their Wesson & Leavitt revolvers, they started making hand turned revolvers, but they were never very popular and production was rather limited. This example was manufactured in the early to mid-1850s and has a small button on the bottom of the action just ahead of the trigger that releases the cylinder so that it can be manually rotated. At least 200 of these pistols were shipped to abolitionist John Brown in Kansas in 1857. Other mechanisms were also tried. One method, for example, used a trigger pull to rotate the cylinder and then the hammer was manually cocked. To make these more primitive firearms more palatable to the public, Mass Arms Co. equipped it with Maynard's tape priming system. This example has attractive scrollwork engraving on the hammer, lock, and frame; a shield with "MAYNARD'S PATENT/[patriotic eagle and shield motif]/SEP. 22. 1845" on the primer door; etched floral designs on the cylinder; "MASS. ARMS CO./CHICOPEE FALLS" on the top strap; "142" on the recoil shield; "340" on barrel lug; German silver blade front sight; notch rear sight; and smooth grip.

Class: Antique

Exceptionally fine. The barrel and cylinder retain 95% bright original high polish blue finish with minor scratches. The hammer, top strap, frame, and lock plate retain 60% plus original case colors. The etching and engraving are crisp. The brass grip straps and trigger guard retain 70% original silver plating. The re-varnished grip is fine with minor handling marks. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Civil War Era Allen & Wheelock Army Model Center Hammer Revolver

Lot # 1249 (Sale Order: 250 of 674)      

Exceptional Civil War Era Allen & Wheelock Army Model Center Hammer Percussion Revolver

This is an example of a Civil War production Allen & Wheelock Army revolver that was manufactured in Worcester, Massachusetts in 1861-1862. Some estimates suggest Allen & Wheelock only manufactured approximately 700 of these center hammer revolvers and the Ordnance Department purchased 536 Allen revolvers in 1861; all are presumed to be .44 Army revolvers. Revolvers sold on the civilian market during the Civil War were still used during the war as privately purchased sidearms. The left side of the part octagon barrel is stamped with "ALLEN & WHEELOCK. WORCESTER. MASS. U.S./ALLEN'S PT'S. JAN.13.DEC.15.1857.SEPT.7.18." The serial number "502" is stamped on the inside of the trigger guard, rear face of the cylinder, cylinder rod, side of the hammer, underside of the sideplate, left side of the grip frame, and underside of both grip panels.

Class: Antique

Exceptionally fine, retains 75% plus original bright high polish blue finish with scattered areas flaking to a smooth gray and brown patina on the balance, scratches, and defined markings and edges in the metal. 75% vivid original case colors remain on the hammer and trigger guard. Grips are excellent with most of the original varnish, some minor chipping along the otherwise defined bottom edges, and some scattered light handling marks. Mechanically excellent. This attractive, high condition, Allen & Wheelock Army Model Center Hammer revolver would make a fine addition to any early American firearms collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 4,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 10 of 27

1.178.0.836.d2a4bd2.8.140