Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
Auction closed.
Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
Auction closed.
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 7 of 27

Smith & Wesson New Model No. 3 Single Action Revolver

Lot # 1150 (Sale Order: 151 of 674)      

Smith & Wesson New Model No. 3 Single Action Revolver

In 1878 S&W introduced the New Model No. 3, and it was an instant success. Its design drew on handling and mechanical improvements from its popular predecessors, the American, Russian and Schofield models, and spawned a series of wide ranging variations, including a target model that dominated target competition in the late 19th century. This example has a barrel marked "44 S&W CTG" on the left side. This model rarely had caliber markings. The cylinder is non-matching (34686). The barrel and barrel latch are numbered to the gun.

Class: Antique

Fine, retaining 40% plus original blue finish with a smooth brown-gray patina on the balance. Traces of original case colors remain on the trigger guard. The hammer retains 40% original case colors. The grips are also fine with some minor handling marks and some softened checkering. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Antique Factory Engraved Colt Frontier Six Shooter SAA Revolver

Lot # 1151 (Sale Order: 152 of 674)      

Documented Factory Engraved Etched Panel Colt Frontier Six Shooter Single Action Army Revolver with Highly Attractive Relief Carved Mexican Eagle Pearl Grip and Factory Letter

The .44-40 WCF SAA has found a special place in the hearts of Peacemaker collectors. When introduced in 1877, the .44-40 WCF SAA was intended to be used in conjunction with another legendary Western icon, the Winchester Model 1873 Rifle, which used the same cartridge. As a factory engraved example, this Frontier Six Shooter is certainly one of the rarer and more highly sought after SAAs. In "The Official Record of the Colt Single Action Army Revolver 1873-1895," the authors accounted for a grand total of only 421 factory engraved SAAs chambered in .44-40 WCF in the 1-164100 serial number range. Not only is this one of those rare factory engraved examples, it also has an interesting shipping history that is part of the Colt legacy.The accompanying factory letter states the revolver was shipped to Simmons Hardware Co. of St. Louis, Missouri, on February 10, 1883 as part of a ten gun shipment with a 5 ½ inch barrel in .44-40 caliber, nickel finish, factory engraving, and type of stocks not listed. The factory letter goes on to state, “Our records also indicate this gun was returned by the Simmons Hardware Co. on February 2, 1887 to have the barrel changed from 5 ½” to 4 ¾”. The gun was re-shipped to Simmons Hardware Co. on February 14, 1887. We are unable to explain the reason for the small letter ‘S’ being stamped with the serial number. No mention is made in the records regarding this mark.” Further details of the factory return are presented in “The Official Record of the Colt Single Action Army Revolver, 1873-1895”: “Simmons Hardware was shipped a large order in February [1887] which included 17 engraved Frontier revolvers with 5 1/2” barrel. It is not known if Simmons changed their order or if a mistake was made at the factory, but all 17 engraved revolvers were subsequently returned to the factory and the barrels changed to 4 ¾”. Serial numbers of these revolvers were all in the 86000 to 90000 range” (page 169). It has been hypothesized that Simmons Hardware Co. marked the revolver with the letter “S” to indicate ownership and that these seventeen guns, which included this example, were originally store display samples that were eventually sold to the public with a 4 ¾ inch barrel because the shorter barrel length was a better seller.The revolver is decorated in classic scrollwork on punch dot background. The beautiful coverage displays scroll patterns along with fan patterns on the recoil shield, loading gate, and top of the back strap, zig-zag line geometric patterns on the ejector rod housing, top strap, cylinder, backstrap, butt, and trigger guard bow. The top of the barrel has the two-line Hartford address on top and the highly desirable “COLT FRONTIER SIX SHOOTER” acid etched panel surrounded by engraved scrollwork. The underside of the barrel has the correct caliber designation “44” stamping in small font. The left side of the frame has the three-line patent dates marking. The revolver wears a set of pearl grips featuring a wonderful deep relief carved Mexican eagle on the right panel. The period grips are high quality, and likely introduced to the revolver by Simmons Hardware Co. where it was originally shipped to. The loading gate has the assembly number “5327.” The matching serial number along with the aforementioned letter “S” appears on the frame, trigger guard, and back strap.

Class: Antique

Exceptionally fine, retaining 80% original nickel plating. The acid etched panel is legible. The engraving is crisp. The grips are excellent with a filled repair at the toe (left panel) and crisp carving. Mechanically excellent. A great piece of late 19th century Colt artistry that has a story to tell!

Provenance: The TTT Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 35,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Engraved Tipping & Lawden Model 1A Pepperbox Pistol

Lot # 1152 (Sale Order: 153 of 674)      

Exceptional Possibly Finest Known Cased, Exhibition Quality Factory Engraved Tipping & Lawden Model 1A Pepperbox Pistol

Tipping & Lawden of Birmingham, England, were one of only two firms licensed to manufacture Sharps pistols abroad. This pistol is one of only around 2,000 Model 1 pistols manufactured by the firm. In the 1860s to early 1870s. It is certainly among the most ornate and finest condition Tipping & Lawden pistols extant and has nearly full coverage scroll engraving on the silver plated frame which is marked "TIPPING & LAWDEN/SHARPS PATENT" in a circle around the hammer screw on the right. The bright royal blue barrel has an engraved border at the muzzles, scrollwork around textured grip panels on the sides, and additional scrollwork at the breech. The grips have coordinating floral scroll patterns. The pistol comes in an E.M. Reilly & Co. retailer case with an oiler, screwdriver, and cleaning rod.

Class: Antique

Excellent. The barrels retain 98% plus of the original bright high polish blue finish, the hammer displays vibrant original case colors, and the frame retains virtually all of the original silver plating which has a lightly aged patina. There is some edge wear primarily at the muzzle and some light handling and storage marks. The grips are fine with minor handling wear, dark black tone on the right, and lightly aged tone on the left grip which faces out when in the case. Mechanically excellent. The engraving and markings throughout are crisp. This is easily one of the most attractive Tipping & Lawden pistols we have ever offered at auction and would be nearly impossible to improve upon.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt First Generation Single Action Army Revolver

Lot # 1153 (Sale Order: 154 of 674)      

Excellent Documented Colt First Generation Single Action Army Revolver with Factory Letter

The Colt Single Action Army Revolver is arguably the most iconic American handgun. In the hands of ranchers, cavalrymen, Native Americans, lawmen, and outlaws, the Peacemaker’s legacy was forged out in the hostile American West and continues to gain popularity among today's collectors. Offered here is a very attractive example of the legendary Peacemaker chambered in the iconic .45 LC caliber. The accompanying factory letter states the revolver was shipped on August 5, 1930 to Geller, Ward, & Hasner Hardware of St. Louis, Missouri, the gateway to the West, with a 7 1/2 inch barrel in .45 caliber, blue finish, and type of stocks not listed. This was a single gun shipment. The barrel has the standard one-line Hartford address on top and model and caliber marking on the left side. The left side of the frame has the two-line patent dates marking followed by a Rampant Colt. The matching serial number appears on the frame, trigger guard, back strap, and both grip panels. The matching last two digits of the serial number "04" appear on the back of the cylinder. Matching assembly number "624" is found on the loading gate and rear of the frame.

Class: Curio & Relic Handgun

Excellent, retaining 95% original blue finish with some light spotting and some thinning on the grip straps. The hammer and frame retain 98% vivid original case colors. The grips are also excellent with overall crisp checkering. Mechanically excellent. An excellent pre-war Colt SAA that will be a welcomed addition to any collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt First Generation Single Action Army Revolver

Lot # 1154 (Sale Order: 155 of 674)      

Outstanding Colt First Generation Single Action Army Revolver with Factory Letter

Manufactured in 1922. This is a very beautiful representative example of the legendary Peacemaker chambered in the iconic .45 LC caliber wearing a set of highly attractive period Colt medallion diamond checkered walnut grips. The accompanying factory letter states the revolver was shipped on November 27, 1922 to Janney, Semple, Hill & Co. of Minneapolis, Minnesota, with a 5 1/2 inch barrel in .45 caliber, blue finish and type of stocks not listed. This was a single gun shipment. The barrel has the standard one-line Hartford address on top and "45 COLT" on the left side. The left side of the frame has the two-line patent dates marking followed by a Rampant Colt. The matching serial number appears on the frame, trigger guard, and back strap. The matching last two digits of the serial number "59" appear on the back of the cylinder. Matching assembly number "838" is found on the loading gate and rear of the frame. The Colt Single Action Army Revolver is arguably the most iconic American handgun. In the hands of ranchers, cavalrymen, Native Americans, lawmen, and outlaws, the Peacemaker’s legacy was forged out in the hostile American West and continues to gain popularity among today's collectors. This example will certainly make a statement in any SAA or American firearms collection.

Class: Curio & Relic Handgun

Excellent, retaining 95% plus original blue finish with some thinning on the grip straps, a cylinder drag line, and scattered light edge wear. The hammer and frame retain 97% original vivid case colors. The period replacement factory pattern grips are very fine with an impression near the bottom on the left panel, otherwise a few handling marks and overall crisp checkering. Mechanically excellent. A fabulous example of a pre-war Colt SAA well deserving of the finest collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson 1st Model American Revolver in .44 Henry & Stock

Lot # 1155 (Sale Order: 156 of 674)      

Ultra Rare and Excellent Smith & Wesson First Model American Revolver in .44 Henry Rimfire with Relief Carved Grips and Period Detachable Stock

This is an outstanding example of one of the most rare and highly sought after of the First Model Americans. One of only 200 First Model Americans manufactured in the .44 RF caliber. Manufactured circa 1871. The revolver has a nickel-plated barrel, frame, cylinder and trigger guard with a casehardened hammer and trigger. The revolver has period hand carved two-piece antique ivory grips. The elaborate monogram "JBMO" is relief-carved in a shield on the right grip. The back strap has a screw fastened mount for an interesting period detachable skeleton stock with hinged buttplate. The stock has a high polish blue finish. The top of the barrel rib is roll-stamped with the legend "+ SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT. JULY 10. 60. JAN. 17. FEB. 17. JULY 11. 65 & AUG.24. 69+" in one line. The serial number is stamped on the bottom of the butt. The assembly number "381" is stamped on the rear face of the cylinder, barrel latch and barrel. The revolver and stock are complete with a contemporary French fitted walnut case with blue velvet lining.

Class: Antique

Very good. The revolver retains nearly 95% original nickel-plated finish. Wear is limited to some very minor spots of flaking on the sides and bottom of the barrel, the trigger guard and the rear edges of the cylinder. The hammer and trigger retain 90% of the original case colors. The stocks are excellent overall and the edges of the relief-carved monogram are sharp and showing several attractive circular age cracks on the bottom of the stocks. The legend on barrel rib, serial number and assembly numbers are sharp. The detachable stock retains 98% of the blue finish. The case interior and exterior are excellent. This is an outstanding example of a highly desirable First Model American Revolver in the rarest of all calibers and in stunning original condition.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Pair of Colt "Thuer" Third Model Derringers with Box

Lot # 1156 (Sale Order: 157 of 674)      

Exceptional Pair of Colt "Thuer" Third Model Derringers with Extremely Rare Factory Box -A) Colt Third Model Derringer

Exceptional Pair of Colt "Thuer" Third Model Derringers with Extremely Rare Factory Box -A) Colt Third Model Derringer
Colt manufactured these Third Model derringers from 1870 to 1912, and they were Colt's most popular single shot pocket pistols. This exceptionally high condition pair has the later sloped hammers, round blade front sights, "-COLT-" on top of the barrels, London proofmarks on the bottom of the barrels, nickel-plated barrels and frames, casehardened hammers, niter blue remaining small parts, and smooth varnished grips hand numbered to the pistols. They come in an extraordinarily rare box designed to hold the pair. It has "-/5/4" over "Pair" written on one of the wooden rods inside and inside the bottom of the carton. The lid has the Rampant Colt trademark and "COLT'S/41 Cal./BREECH-LOADING/DERINGER."

Manufacture: Colt
Model: #3 Derringer
BBL: 2 1/2 inch round
Stock:
Gauge: 41 RF
Finish: nickel
Grips: walnut
Serial Number: 44206
Class: Antique

Condition: Excellent with 98% plus original nickel plating, essentially all of the bright original niter blue and case colors on the small parts, light scratches, and minimal overall wear. The grips are also excellent aside from a small flake absent on the right at the toe. Mechanically excellent. The incredibly rare box is fine and has distinct markings, minor repairs, moderate edge wear, a small piece absent on the right flap of the lid, and a few small tears.

B) Colt Third Model Derringer
See "A".

Manufacture: Colt
Model: #3 Derringer
BBL: 2 1/2 inch round
Stock:
Gauge: 41 RF
Finish: nickel
Grips: walnut
Serial Number: 40318
Class: Antique

Condition: Excellent with 98% plus original nickel plating, essentially all of the original case colors and niter blue on the small parts, and minimal handling and storage type wear. The grips are also excellent and have only minor edge and handling wear. Mechanically excellent. This amazing pair may be the only pair complete with a Colt box. All Colt boxes from this era are rare, and boxes for the Colt derringers are especially so. They are rarely even seen let alone offered for sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Relief Carved Dormant Lion Sword Cane with Silver Bands

Lot # 1157 (Sale Order: 158 of 674)      

Desirable Relief Carved Dormant Lion Sword Cane with Engraved Silver Bands

During the 19th and 20th centuries, canes became incredibly popular as a status symbol, especially among the upper class in Western Europe and North America. This specific cane is a fantastic example of that, having been beautifully relief carved in the form of a resting male lion, perfect for a gentleman who may have hunted in Africa. The lion has traditionally been a symbol of courage, nobility, valor, strength, and royalty. The grip is joined to the shaft with an ornately floral engraved, wide silver band, with a matching silver band where the two pieces of the shaft join. The sword blade measures 25 inches and has a fuller in each side. The smooth shaft is of Malacca and tipped with German silver and iron. It measures 36 5/8 inches overall.

Class: Other

Fine, the grip shows an attractive, lightly aged tone with a few scattered hairline age cracks. The silver shows and attractively aged patina and crisp engraving. The shaft has two vertical cracks at the top with some scattered light wear/flaking of the varnish and some light handling marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Relief Carved Elephant Bust Cane

Lot # 1158 (Sale Order: 159 of 674)      

Relief Carved Elephant Bust Cane with Inscribed Gold Plated Band

The popularity of the cane as a status symbol for the middle classes through the upper echelons of society reached its pinnacle in the 18th and 19th centuries at roughly the same time as many European powers reached their peaks of global power. This cane would have certainly befit a worldly British gentleman after a post in certain parts of the British Empire such as Africa or India, given its subject matter. The L-shaped grip of this cane has been attractively relief carved in the form of an elephant's head. The grip is joined to the shaft with a gold plated brass band that has a zig-zag motif and is inscribed with the initials "C.F.M." The shaft appears to be Malacca coated in a dark varnish and appears to have once had a protective tip that is now absent.

Class: Other

Fine, the grip shows an attractive lightly aged tone with a chip absent from the tip of the right tusk and a few scattered hairline age cracks. The band retains most of the gold plating with some light wear. The otherwise good shaft shows some moderate crazing of the varnish and a few light handling marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Relief Carved Cobra Cane

Lot # 1159 (Sale Order: 160 of 674)      

Attractive Relief Carved Cobra Cane

Canes reached the pinnacle of their popularity, especially among the gentry and upper echelons of society, in the late-19th and early-20th centuries, becoming far more than just a mobility tool, but rather a statement piece to project one's social status and wealth. This attractive cane would have been an excellent accessory for a worldly gentleman from that period. The grip of the cane is attractively carved in the form of a cobra emerging from a log. The grip is joined to the shaft with German silver band with floral motifs. The smooth shaft appears to be ebony and is tipped with dark horn. It measures 32 1/2 inches overall.

Class: Other

Very good, the grip shows a lightly aged tone with a noticeable chip absent from the left of the log and a few hairline age cracks. The band is mostly bright. The shaft is fine with some scattered light handling marks and light wear on the tip.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Relief Carved Crocodile Cane with Silver Band

Lot # 1160 (Sale Order: 161 of 674)      

Ornate Relief Carved Crocodile Cane with Sterling Silver Band

Canes and walking sticks had been growing in popularity for centuries, first among royalty and nobility, and eventually reaching their most widespread use by the 19th and 20th centuries, having worked their way down to the middle classes as a symbol of the status of whoever carried one. Canes were particularly popular among gentlemen throughout the British Empire, with this example presenting strong association to Egypt or Australia given its theme. The somewhat L-shaped, antique ivory grip of this cane has been expertly relief carved in the form of a crocodile that is fitted with glass eyes. The grip is joined to the shaft by a smooth sterling silver band marked with multiple small hallmarks. The shaft is smooth hardwood and tipped with German silver and iron.

Class: Other

Very good, the grip shows an attractive lightly aged tone with minimal handling evidence. The silver shows an attractively aged patina. The shaft is fine with a few scattered light handling marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

G. Young Engraved/Inscribed Smith & Wesson Number 1 1/2 Revolver

Lot # 1161 (Sale Order: 162 of 674)      

Factory Gustave Young Attributed Presentation Inscribed/Engraved Smith & Wesson Number 1 1/2 2nd Issue Revolver with Checkered Pearl Grips and Case

Manufactured from 1868 to 1875. Engraved by S&W Master Engraver Gustave Young, the revolver is decorated with Young's signature floral scrollwork on punch dot background covering 90% of the surface. The underside of the frame carries the presentation inscription: "PRESENTED TO/N.F. Fuller Jr./by the citizens of/West Rockbury/Nov. 25, 1875." West Rockbury is likely the misspelling of West Roxbury, the southwest neighborhood of the City of Boston. At the time of this writing N.F. Fuller, Jr. remains unidentified. The revolver features a full nickel plating and is fitted with pearl grips. The checkered pearl grips are accented with a floral carving. The back of the right grip panel has the number "507." The back of the left grip panel has the number "57." The matching assembly number appears on the grip frame, cylinder, and barrel. The period partitioned case contains a sealed picture box of UMC .32 caliber cartridges and ten loose cartridges.

Class: Antique

Extremely fine, retaining 85% original nickel plating with some dark pitting in a few of the cylinder flutes. The engraving is crisp. The grips are excellent with crisp carving and attractive colors. Mechanically excellent. The case is fine with minor handling/storage marks and typical high spot wear on the lining. A very attractive Gustave Young presentation engraved S&W tip up revolver.

Provenance: The David Burghoff Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

New York Engraved Smith & Wesson .38 Single Action Revolver

Lot # 1162 (Sale Order: 163 of 674)      

New York Engraved Smith & Wesson .38 Single Action 2nd Model Revolver with Pearl Grips and Case

108,255 of these revolvers were manufactured in 1877-1891. This revolver has the standard markings and features and is New York engraved with classic scroll engraving with punch dot backgrounds, intertwining lines, and a floral blossom behind the hammer. The revolver wears a set of pearl grips. The period partitioned case contains a rare 1st type .38 S&W cartridge picture box, marked "36/.38 Cal" by U.S. Cartridge Co. containing 16 rounds, five loose .38 caliber cartridges (mostly UMC), case key, and tool.

Class: Antique

Excellent as New York engraved, retaining 97% original nickel plating. The engraving is crisp. The grips are also excellent with a slight stress line near the top (left panel) and highly attractive fiery colors. Mechanically excellent. The case is fine with minor handling/storage marks and some wear to the lining.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson No. 3 Second Model Russian Single Action Revolver

Lot # 1163 (Sale Order: 164 of 674)      

Attractive Smith & Wesson No. 3 Second Model Russian Single Action Revolver

Manufactured circa 1873 to 1878 this model is commonly known as the Old Model Russian and is easily recognizable by the spurred trigger guard. The Second Model Russian was also manufactured with a 7 inch solid rib barrel and features a pinned blade front sight and notch rear sight on the barrel latch. The serial number is stamped on the butt along with "SH" inside a diamond. The "SH" inside the diamond indicates this is a fairly scarce variation of the Second Model Russian which would have been purchased and subsequently marked by Schuyler Hartley & Graham. The matching assembly number "00" is stamped on the rear face of the cylinder, barrel, barrel latch and on the left side of the grip frame. The top of the barrel rib is marked "SMITH & WESSON SPRINGFIELD. MASS. U.S.A. PAT. JULY 10.60. JAN. 17. FEB. 17. JULY. 11 65 & AUG. 24. 69." flanked by Maltese crosses. All blue finish with casehardened hammer and trigger guard.

Class: Antique

Very fine. The revolver retains 80% original blue finish with the balance a smooth brown patina. The barrel shows two patches of dark spotting which were cleaned; one just behind the rear sight and the other on underside of muzzle. All markings remain clear. The hammer and trigger guard retain vivid original case colors. The screw heads still exhibit brilliant flashes of their original niter blue finish. The grips are also very fine with some chipping and a very attractive aged grain pattern and color. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Special Smith & Wesson First Model .44 Double Action Revolver

Lot # 1164 (Sale Order: 165 of 674)      

Extremely Rare Smith & Wesson Special Production Run First Model .44 Double Action Revolver in .38 Military Caliber with Target Sights and Factory Letter

Per the factory letter, this revolver was manufactured in 1903 and is "one of only approximately 10 First Model .44 DA revolvers chambered in the 38 Military caliber and one of a very small percentage converted to a target model." The top of the barrel rib is marked "SMITH & WESSON SPRINGFIELD MASS. U.S.A." flanked by Maltese crosses. Blue finish with casehardened hammer and trigger, blade front and adjustable rear target sights and fitted with checkered hard rubber grips with "S&W" in a circle at the top and patent date on the lower left panel. This revolver has matching serial numbers on the frame, cylinder and barrel assembly (under the barrel latch). The factory letter verifies this revolver as a ".44 Double Action First Model, Special Production Run, .38 Military (Long Colt) revolver", shipped to Simmons Hardware Co., St Louis, Mo, on May 7, 1903 (though all frames were manufactured prior to 1899) with a 6 1/2 inch barrel, adjustable target rear sight, blue finish and black hard rubber grips.

Class: Curio & Relic Handgun

Very fine. The revolver retains 75% plus original blue finish with a smooth brown patina on the balance. The majority of the finish loss is on the forward portion of the barrel, cylinder flats and back strap. The hammer and trigger retain most of the original vibrant case colors. The grips are excellent with a few minor handling marks and crisp checkering. The markings are clear. The mechanics are fine. An extremely rare variation of the Smith & Wesson First Model .44 DA revolver. The only example offered for sale in over 10 years!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Single Action Sheriff's Model Revolver

Lot # 1165 (Sale Order: 166 of 674)      

Desirable Documented Nickel Plated Black Powder Colt Single Action Sheriff's Model Revolver with Extraordinary Double Relief Carved Eagle Head Pearl Grips and Factory Letter

The ejectorless black powder Colt "Sheriff's Model" Single Action Army Revolver is one of the rarest and most sought after variations of the legendary Peacemaker. This nickel plated example is fitted with a factory documented ejectorless 4 inch barrel. In "The Official Record of the Colt Single Action Army Revolver, 1873-1895" the authors stressed the rarity of the ejectorless SAAs as a whole (barrel lengths ranged from 2 1/2 to 7 1/2 inches in the study) and state that "just under 600 ejectorless Single Action Army revolvers were produced in all calibers from 1882 to the 1930s." Based on their analysis Colt manufactured only 37 non-engraved SAAs with a 4 inch barrel in .45 Long Colt and nickel plating in the 1-164100 serial number range (page 326). This is certainly a rare SAA variation that is missing from even the most advanced collections. The accompanying factory letter confirms the "Sheriff's Model" configuration: 4 inch barrel in .45 caliber and nickel finish with type of stocks not listed. The revolver was shipped on May 1, 1880 to Hartley & Graham of New York City as part of a six gun shipment. The nickel plating is a highly sought after finish on antique SAAs as blue finish was more common on this model. The top of the barrel has the two-line Hartford address. The left side of the frame has the three-line patent dates marking. The left side of the trigger guard is marked "45 CAL." The revolver wears a set of highly attractive pearl grips featuring a relief carved eagle head on each side. These grips were likely provided by Hartley & Graham and only add to its appeal. Matching serial numbers appear on the frame, trigger guard, and back strap. Whether on the hip of a lawman, carried by an outlaw or under the counter of a storekeeper's shop, the "Sheriff's Model" Colt SAA was at the front lines and thus saw hard use with this example being in above average condition. It is not hard to imagine this "Sheriff's Model" carried by a flamboyant wealthy Easterner.

Class: Antique

Fine, retaining 40% original nickel plating with a smooth gray patina associated with a well traveled sidearm on the balance. The grips are excellent with crisp carving and highly attractive fiery colors. Mechanically excellent. The black powder Sheriff's Model revolver is missing from even the most advanced SAA collections. This is your chance to acquire one of the most sought after variations of the legendary Peacemaker.

Provenance: The TTT Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Texas Shipped Factory Engraved Colt Model 1877 Revolver

Lot # 1166 (Sale Order: 167 of 674)      

Rare and Desirable Antique San Antonio, Texas, Shipped Factory Engraved Colt Model 1877 Thunderer Double Action Revolver with Relief Carved Steer Head Pearl Grips and Factory Letter

The accompanying factory letter lists this highly sought after Model 1877 Thunderer with a 4 1/2 inch barrel in .41 caliber, nickel plating, factory engraving and grips not listed when shipped to Charles Hummel & Son of San Antonio, Texas, on September 18, 1890. Hummel & Son was once the largest Colt dealer west of the Mississippi River. This shipment was for two guns. The sides of the barrel and frame are richly engraved with Helfricht style floral scrollwork on a punch dot background. Scrolls and zig-zag line motifs alternate on the chambers of the cylinder while the rear of the cylinder has a zig-zag line and dot pattern band. Fan patterns adorn the recoil shields and loading gate. Zig-zag line and dot patterns are featured on the barrel ahead of the two-line Hartford address, top strap, back strap and trigger guard. The ejector rod housing features a wavy line and dot motif on top and star burst pattern on the side. The extensive use of zig-zag lines and dots makes for an unusual factory pattern on a revolver model that is rarely found factory engraved. The left side of the frame has the three-line patent dates marking amongst the engraving. The attractive period pearl grips have an outstanding highly detailed relief carved steer head on the right panel. The assembly number "79" is marked on the loading gate. Matching serial numbers are on the frame, trigger guard, and back strap. According to Colt historian R.L. Wilson, approximately 475 Model 1877 Thunderers were factory engraved per the factory records. This Colt model 1877 Thunderer revolver and lot 1177 a Colt model 1877 Lightning are both factory engraved Texas shipped with pearl grips, sent one week apart, and less than 150 serial numbers apart.

Class: Antique

Very fine, retaining 80% original nickel plating with the balance a smooth gray patina. The factory engraving is crisp. The grips are also very fine with minimal handling evidence, crisp carving and fiery colors. The cylinder stop needs work as the cylinder does not rotate properly when the action is cycled. A great piece of late 19th century firearms art that will be a welcome addition to any Colt collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Brackettville, Texas City Marshal Badge

Lot # 1167 (Sale Order: 168 of 674)      

Desirable Brackettville, Texas, City Marshal Badge Made by C. Stubenrauch of San Antonio, Texas

Originally founded 1852 under the name Las Moras, the town of Brackettville was a supply stop along the San Antonio to El Paso road, as well as a supply depot for U.S. Fort Clark which was established the same year. In 1873, the town's name was changed from Brackett to Brackettville when it was awarded a post office to avoid confusion with another town. For many years, especially during the Indian Wars, the nearby Fort Clark was the base of the famous African American cavalry units, the "Buffalo Soldiers". By the time of its closing in 1946, Fort Clark had been garrisoned by or hosted training for virtually every cavalry unit in the U.S. Army. Nearby to the north of Brackettville is "Alamo Village", the full sized Alamo set which was built in the 1950s for John Wayne's 1960 classic "The Alamo". This city marshal badge was likely manufactured in the late 19th century, is of brass construction, and has a maker's mark on the back for C. Stubenrauch of San Antonio, Texas. It takes on the most iconic shape of a sheriff, marshal, or ranger's badge, having a five-pointed star at the center with a ring around it. The star is marked "TEXAS", while the ring is marked "MARSHAL/BRACKETTVILLE" above and below the star.

Class: Other

Very good overall, showing an attractively aged patina, some mild edge wear, and a few scattered light handling marks. This would be a great display piece alongside firearms of the American West!

Provenance: The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Engraved 1st Generation Colt Single Action Army Revolver

Lot # 1168 (Sale Order: 169 of 674)      

Documented Factory Engraved Nickel and Gold First Generation Colt Single Action Army Revolver with Relief Carved Ox Head Pearl Grips and Factory Letter

The Colt SAA found itself almost immediately popular as a sidearm upon its release in the mid-late 1800s, and that popularity continued well into the 20th century among those with a desire for unwaveringly reliable firepower. This documented factory engraved example was manufactured in 1902, and certainly shows a certain flair that is often associated with early 20th century Eastern wealth. The accompanying factory letter states the revolver was shipped to E.K. Tryon, Jr. & Co. of Philadelphia, Pennsylvania, on January 28, 1902 as part of a two gun shipment. The letter verifies the 4 3/4 inch barrel in .38-40 caliber, nickel plating with gold cylinder, and factory engraving with type of stocks not listed. The decorative work on the revolver bears profuse foliate scroll pattern with punch dot background, heart motif on the loading gate and behind the hammer, entwining lines, zig zag lines, and cross hatching. Writer believes the aforementioned embellishment was executed by Cuno Helfricht. The embellishment displays the characteristics of patterns associated with Colt Master Engraver Cuno Helfricht and his shop. Helfricht spent his nearly 50 year career exclusively with the Colt firm (1871-1921). During his tenure with Colt, Helfricht saw the transition from percussion to cartridge firearms and a rapidly growing market for engraved firearms. At the height of the firearm engraving fad, Helfricht oversaw a shop of six engravers. By the turn of the century, experts believe that Helfricht did most of the work himself with the help from one to two assistants. Helfricht's successor's included famed Colt engravers Wilbur Glahn and William Gough. The revolver wears a set of period pearl grips with the right panel featuring a relief carved ox head. The barrel has the standard two-line Hartford address on top and "38 W.C.F." in a banner on the left side. The left side of the frame has the two-line patent dates marking followed by a Rampant Colt. Matching serial numbers appear on the frame, trigger guard, and back strap. The matching partial serial number "115" appears on the rear of the cylinder.

Class: Curio & Relic Handgun

Very good, displaying the appearance of a well traveled sidearm proving that not all art hangs on the wall with strong traces of original nickel plating in the protected areas. The engraving is crisp overall. The grips are fine with crisp carving. Mechanically fine. A factory engraved Colt SAA with authentic character.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Engraved Colt Model 1877 Thunderer Revolver

Lot # 1169 (Sale Order: 170 of 674)      

Documented Wexell & DeGress Mexico City Shipped Antique Factory Engraved, Etched Panel, Nickel and Gold Colt Model 1877 Thunderer Double Action Revolver with Rare Factory Documented Relief Carved Mexican Eagle Pearl Grips and Factory Letter

Offered here is a documented example of a Mexico City shipped factory engraved Model 1877 "Thunderer" revolver. The included factory letter states the revolver was shipped to famed retailer Wexell & DeGress of Mexico City, Mexico, on September 23, 1885 with a factory engraving, 5 inch barrel in .41 caliber, nickel finish, and pearl grips with carved Mexican eagle motif. This was a six gun shipment. Although the revolver wears a set of Mexican eagle carved pearl grips, these grips are not original to the gun. The cylinder and ejector rod housing have a gold wash finish. The barrel, frame, and grip straps are plated in nickel. The Colt factory engraving consists mostly of floral scrolls on punch dot background with fan motifs on the recoil shield, loading gate, and behind the hammer, wavy lines on the top strap, rear of cylinder, and ejector housing, and star bursts on trigger guard bow and front of frame. The barrel has the two-line Hartford address stamped on top and the acid etched "COLT DA 41" panel on the left side. Matching serial numbers appear on the frame, trigger guard, and backstrap.

Class: Antique

Fine as a South of the border survivor with great appeal, proving that not all art hangs on a wall. The revolver retains 60% untouched original nickel plating and 40% of the period retailer applied gold wash on the cylinder and ejector housing. The acid etched barrel panel is clear. The engraving is crisp. The fine grips show similar "working gun" character from spending a lifetime in the hand. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

F. Burkhard Trinidad, Colorado Mexican Loop Holster Rig

Lot # 1170 (Sale Order: 171 of 674)      

Highly Desirable F. Burkhard Trinidad, Colorado Mexican Loop Holster Rig with Burkhard Cartridge/Money Belt

Established in 1879 in Trinidad, Colorado, the Frederick Burkhard saddle making firm was formed just three years after the incorporation of the town. In 1882, Bat Masterson was the town marshal of Trinidad, and from that year the Burkhard firm is known to have used the bordered maker's mark that is present on this holster. The holster itself is a fairly typical Mexican loop design that was popular at the time, with the "F. BURKHARD/MAKER/TRINIDAD COLO." mark within a shield-like border prominently on the body, and it will accommodate a Single Action Army revolver with a 4 3/4 inch barrel. The billet of the belt has a Burkhard maker's mark on the billet, a single row of .44/.45 sized cartridge loops, a nickeled buckle with clipped corners, a money pocket near the buckle, and measures approximately 40 1/2 inches overall.

Class: Other

Very good, the holster showing moderate wear, some cracking typical of its age, and some absent stitching from the toe. The belt has mild wear overall and all of the stitching appears to be tight. A highly desirable, early Colorado holster rig that would enhance your Single Action Army collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Montana Shipped Colt First Generation Single Action Army

Lot # 1171 (Sale Order: 172 of 674)      

Desirable Documented Billings, Montana Shipped Colt First Generation Single Action Army Revolver with Relief Carved Pearl Grips, Matching Billings Made Holster Rig with Cartridge/Money Belt, and Factory Letter

Manufactured in 1901, this desirable Colt Single Action Army revolver was shipped to Montana, when the Western Frontier was still very much wild. These Montana shipped guns are far more rare than the, also desirable, Texas shipped revolvers, with only around 145 shipped to Montana up to 1898, while nearly 6,000 were shipped to Texas. According to the included factory letter, this revolver was sold to Winchester Repeating Arms Company, which was not uncommon, given that Colt revolvers were sold through Winchester affiliated dealers and visa versa. At the time of shipment to A.L. Babcock Hardware in Billings, Montana, it was very much still part of a wild frontier, seeing two local train robberies in 1902 and 1904. The included factory letter also confirms the serial number, caliber, barrel length, and finish, as well as a shipment date of 29 June 1901. The revolver has standard markings including matching serial numbers on the frame, trigger guard, and back strap. It has been fitted with an attractive pair of period retailer pearl grips, with the right panel having a relief carved deer's head, befitting the wild nature of Montana. Completing the full Montana rig, this revolver includes a Billings made holster rig by "F.B. Chapman Billings Mont." The holster itself is of the Mexican loop pattern with the maker's mark on the front of the body along with light border tooling. The seams are secured with a thick rawhide whip stitch. Also includes an unmarked wide, saddle shop quality cartridge/money belt with a single row of cartridge loops and a German silver clipped corner buckle. A complete rig with revolver, holster, and belt all from the same location on the Western Frontier is truly a scarce find!

Class: Curio & Relic Handgun

Very good overall as a working Montana outfit. The mechanically excellent Colt shows mostly smooth, once cleaned, artificial grey-brown patina and some scattered very light surface pitting, typical of a Montana working gun. The period retailer installed grips are also fine with a large period repair on the left panel along with a minor chip absent at the top, a smaller repair in the right panel, and otherwise minor handling marks and distinct carving. The holster has wear and light cracking and the belt is good with extensive age cracking and a stabilizing strap added to the backside of the billet opposite the buckle. A rare complete Billings, Montana Single Action Army Rig that exudes all of the legendary character of the American West!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt First Generation Single Action Army Revolve

Lot # 1172 (Sale Order: 173 of 674)      

Excellent Documented Colt First Generation Single Action Army Revolver in Scarce .38 Long Colt with Original Box and Factory Letter

Colt introduced the .38 Long Colt caliber to its line of SAAs in 1886, and it is a highly sought after chambering for today's collectors. As explained by Colt historian and author David Brown, "The comparatively small production of this caliber makes these guns hard to find, and they are prized by collectors. Specimens in mint condition are extremely rare." Before 1914 Colt produced only 1,011 standard SAAs chambered in .38 LC ("The 36 Calibers of the Colt Single Action Army," page 170). This high condition example comes with a factory letter that confirms it was sold to Howell Shingle Co. of Portland, Oregon, and shipped on December 9, 1913, to Marshall-Wells Hardware Co. with a dealer location in Portland, Oregon. Interestingly, it goes on to list all the other dealer locations of this company. This was a single gun shipment. The factory letter confirms the 4 3/4 inch barrel in .38 Colt and blue finish with type of stocks not listed. The barrel has the two-line Colt Hartford address on top and is marked "38 COLT" on the left side. The frame carries the standard two-line patent date marking followed by a Rampant Colt on the left side. The trigger guard is stamped with the Colt factory triangle proof and the number "1." Matching serial numbers appear on the frame, trigger guard, back strap. The matching partial serial number "7883" is marked on the back of both grip panels. The matching assembly number "733" is found on the loading gate and back of the frame. Includes the original box and bore brush. The matching number box carries the correct period label listing the 4 3/4 inch barrel, "rubber" grips, blue finish, and .38 "Colt cartridge" caliber.

Class: Curio & Relic Handgun

Excellent, retaining 97% plus bright original high polish blue finish with high edge wear and light cylinder drag lines. The hammer and frame retain 98% vivid original case colors. The grips are also excellent with crisp checkering. The repaired box is fine. Mechanically excellent. A high condition Colt SAA in highly desirable .38 LC well deserving of the finest collection.

Provenance: The TTT Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

W.B. Ten Eyck "Mexican Loop" Holster and Cartridge/Money Belt

Lot # 1173 (Sale Order: 174 of 674)      

Desirable Billings, Montana, W.B. Ten Eyck "Mexican Loop" Colt Single Action Army Holster and Cartridge/Money Belt

Manufactured c. 1886-1900 in Billings, Montana, by W.B. Ten Eyck, one of the more scarce Western saddle and holster makers. Ten Eyck was born in Pennsylvania in 1858, traveling westward in the 1880s, he originally found work in a Miles City, Montana, saddle and tack shop before moving to Billings and establishing his own shop in 1886. Like most holster makers in the American West, Ten Eyck specialized in saddles first and foremost, for which his shop gained a notable reputation. This example shows the eye-catching, framed "W.B. TEN EYCK/Billings M.T." maker's mark on the outer surface of the holster as well as the belt billet. This holster was very clearly originally manufactured and paired with this belt as it is riveted to the belt with the same copper rivets used on the holster loop. The is sized for a 4 3/4 inch Colt Single Action Army revolver, with single "Mexican Loop", light border tooling, and an open toe. There is a single row of cartridge loops on the belt that appear to accommodate .44 or .45 caliber cartridges, a small opening for storing money near the buckle, and the buckle is iron. The rig is oriented for a right handed shooter. The belt is 3 3/4 inches wide and approximately 40 inches long.

Class: Other

Very fine overall with some mild wear and handling evidence typical of use on the Western Frontier, some scattered age-cracking, and almost all of the stitching remaining tight. This is a very fine example of a holster rig from one of the American West's rarer makers!

Provenance: The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Antique Colt Single Action Army Revolver

Lot # 1174 (Sale Order: 175 of 674)      

Documented Factory Nickel Black Powder Colt Single Action Army Revolver with Slim Jim Holster and Factory Letter

The factory letter for this highly desirable factory nickel plated black powder Colt SAA revolver states it was shipped on August 25, 1877 to B. Kittredge & Co. of Cincinnati, Ohio with nickel plating and .45 caliber chambering. The barrel length and grips are not listed, a common indication of 7 1/2 inches and walnut. This shipment was for fifty guns. Factory nickel plated antique SAAs are rarely encountered and when found are generally well worn. This example, however, remains well above average condition retaining much of the original factory nickel plating. The barrel has the one-line Hartford address on top, and the left side of the frame has the three-line patent dates marking. "45 CAL" is stamped on the left side of the trigger guard. The period grips were likely fitted by Kittredge. Matching serial numbers appear on the frame, trigger guard, and back strap. Includes a period slim Jim leather holster.

Class: Antique

Very fine, retaining 75% untouched original nickel plating with brown-gray patina on the balance. The grips are also very fine with typical age lines and attractive mellow aged appearance. The action cycles, however the cylinder is slightly out of time and the hammer has only three clicks. The holster is very good with age cracking and overall tight stitching. A very pleasing and documented factory nickel plated black powder Colt SAA revolver from the Old West!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 7 of 27

1.178.0.872.686122d.10.139