Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
to bid until the live auction begins!
Premier Firearms Auction - Day 2

Premier Firearms Auction - Day 2

Saturday, May 18, 2024  |  9:00 AM Central
to bid until the live auction begins!
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 6 of 27

Smith & Wesson Number 3 American 2nd Model Revolver

Lot # 1125 (Sale Order: 126 of 674)      

Smith & Wesson Number 3 American 2nd Model Single Action Revolver

The American model was introduced 3 years before the Colt Single Action Army revolver and is probably, more than any other model, associated with the historic American West. As S&W expert Roy Double pointed out over fifty years ago, "This was a work gun; a big, heavy-caliber holster gun worn openly and ready to hand; a timely gun indigenous to America on the move and a part of America's greatest adventures." Difficult to obtain in any condition, this American Model revolver is indeed a rare and desirable firearm in above average condition. Matching assembly numbers appear on the grip frame, cylinder, barrel, and barrel latch. The right grip panel is numbered to the gun.

Class: Antique

Fine, retaining 50% original blue with a smooth brown patina on the balance and some dings on the top strap. The trigger guard has faded to a gray. The hammer retains traces of original case colors. The period refinished grips are very good with a slight chip at the toe (right panel), dings, and scratches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Remington Ring Trigger "Zig-Zag" Derringer

Lot # 1126 (Sale Order: 127 of 674)      

Very Scarce and Desirable Remington Ring Trigger "Zig-Zag" Derringer

Less than 1,000 of these small pocket pistols were manufactured in 1861-1862. These were the first Remington firearms designed to fire metallic cartridges. Advertisements listed them as "Elliott's Pocket Revolvers." Many have been lost or destroyed leaving few to fill their places in advanced Remington collections. They are difficult to find in any condition. This example does not show the typical markings on either the left or right of the frame, and the serial number is marked on the butt rather than on the left of the grip frame.

Class: Antique

Good, showing a mostly smooth grey patina and some scattered patches of light pitting. The grips are also fine with a few scattered minor dings/chips. Mechanically fine. A rare Remington derringer missing from many collections!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,750.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Casehardened/Blue Finished Remington-Rider Magazine Pistol

Lot # 1127 (Sale Order: 128 of 674)      

Very Scarce Non-Engraved Casehardened/Blue Finished Remington-Rider Magazine Pistol

These small pistols allowed for more than double the capacity of Remington's famous double derringer in roughly the same overall size. They were manufactured from 1871 to 1888. Most were factory engraved making plain examples like this one harder to find and thus particularly desirable. Adding to this pistol's desirability are the checkered grips (commonly smooth) and blue and casehardened finishes (commonly nickel plated). This example has the two-line address and 1871 patent date marking on top of the barrel and is outfitted with the standard sights.

Class: Antique

Very good plus. The barrel and magazine tube retain 30% original blue finish and traces of original casehardened patterns remain on the frame with the balance a mottled gray patina mixed with pitting. The grips are fine with minimal handling marks and crisp period non-factory checkering overall. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

E. Remington & Sons "Dog's Head" Rimfire Cane Gun

Lot # 1128 (Sale Order: 129 of 674)      

Highly Desirable E. Remington & Sons Thomas Patent Rimfire Cane Gun with "Dog's Head" Handle

The Remington Percussion Cane Gun was patented by John F. Thomas, Remington's master mechanic, on 9 February 1858. These canes were one of the first civilian firearms produced by Remington, and they were the only major American manufacturer to produce one. It is estimated that between 1858 and 1866 only 500 of the percussion cane guns were manufactured, with many of them later being converted to .32 Rimfire. This example is one of approximately 2,000 originally manufactured in .32 RF. Along with that, this particular example has the "dog's head" handle, which is fashioned out of black toned gutta percha. Though the "dog's head" handle is not necessarily the scarcest handle variation seen on these canes, it is often cited as the most desirable. The shaft is sleeved in similar black gutta percha as the handle. There is a small silvered band where the handle meets the shaft and an iron ferrule at the tip/muzzle which is marked "141" and with the Thomas patent and Remington address. It measures 36 1/2 inches overall.

Class: Antique

Fine, the gutta percha having mostly adopted an attractive chocolate tone with some of the original black coloration remaining in sheltered areas and some scattered light handling marks. The silvered band is bright, and the iron ferrule shows a dark grey patina. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,750.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Antique E. Remington & Sons Over/Under Derringer

Lot # 1129 (Sale Order: 130 of 674)      

Excellent Early Production Antique E. Remington & Sons Over/Under Derringer

Remington's classic over/under derringers, aka the "Double Derringer" or "Model 95," are undoubtedly among the most iconic pocket pistols of the American West. The design was patented by Dr. William H. Elliot on December 12, 1865, with this variation being manufactured from around 1870 to 1888. This early variation is marked with the two-line "E. REMINGTON & SONS, ILION, N.Y./ELLIOT'S PATENT DECEMBER 12TH 1865" marking on the rib and has an ejector fitted to the left side. The serial number is on the bottom of the lower barrel and on the frame under the left grip. It is fitted with blade and notch sights, as well as a pair of smooth rosewood grips.

Class: Antique

Excellent, retains 98% plus of the bright original nickel finish and 80% plus of the original niter blue with some scattered light handling marks. The grips are also excellent with some scattered light handling marks and retaining most of the original varnish. Mechanically excellent.

Provenance: The TTT Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Non-Engraved E. Remington & Sons Rider Magazine Pistol

Lot # 1130 (Sale Order: 131 of 674)      

Outstanding Non-Engraved E. Remington & Sons Rider Magazine Pistol

Manufactured c. 1871-1888, this design by Joseph Rider with its tube magazine was one of the more unusual designs seen amongst a plethora of late 19th century pocket pistol designs. The vast majority of these pistols were factory engraved, making a non-engraved example like this one relatively scarce. The standard two-line Remington address and patent date are on the top of the barrel. It is fitted with blade front sight, peep rear sight through the breech block, and a pair of smooth rosewood grips.

Class: Antique

Excellent, retains 97% plus of the original nickel finish with only a few scattered spots of light flaking. The grips are also excellent with a few scattered light handling marks. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,400.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

San Francisco 1906 Shipped Colt Bisley Model Revolver

Lot # 1131 (Sale Order: 132 of 674)      

Documented San Francisco 1906 Shipped Colt Bisley Model Single Action Revolver with Rare Factory Picture Box

The accompanying Colt factory letter dated January 25, 1999, confirms configuration and shipment to Pacific Hardware and Steel Company, San Francisco, California, on March 22, 1906, just 26 days before the San Francisco earthquake tragedy! Pacific Hardware had been constructed just one year prior and was one of the few buildings to survive in the district. The features of this Colt are as follows: Blade front sight and frame notch rear sight. Two line block letter address on top of the barrel, "(BISLEY MODEL) 38 W.C.F." on the left side of the barrel and the left side of the frame is marked with the two-line, three patent dates followed by the circled Rampant Colt. The frame and hammer are casehardened, and the remaining metal surfaces are blue. Wide low hammer spur and wide trigger with characteristic "humpback" grip. Matching serial number on frame, trigger guard and backstrap, and the loading gate is marked with the assembly number "2898". The left front of the trigger guard is marked with the Colt triangle "VP" proof, and the left rear is marked with the number "5". Fitted with two piece checkered hard rubber grips with the Rampant Colt in an oval at the tops. Complete with the original maroon hinged lid box numbered to the gun with Bisley picture label and correct factory end labels.

Class: Curio & Relic Handgun

Excellent. The revolver retains 95% plus of the bright original high polished blue finish with some minor box wear and flaking present on the barrel, a couple of areas of minor pitting on the cylinder and toe of the backstrap, and a few minor dings and handling marks. The frame and hammer retain virtually all of the vivid original case colors. The grips are also excellent with only light handling marks and sharp checkering. The markings are sharp and clear. Mechanically excellent. The factory picture box is fine with the exception of a corner on the lid, pieces of the labels flaked off around the edges and edge wear on the lid. The box is remarkably sound. This extraordinary Colt Bisley revolver is rare in that it is one of only a few known with its original picture box and a survivor of the San Francisco earthquake of 1906 in truly exceptional condition.

Provenance: The George S. Lewis Jr. Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 18,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Nickel Colt Single Action Army Flat Top Target Model Revolver

Lot # 1132 (Sale Order: 133 of 674)      

Extremely Rare Documented Scarce Colt Factory Nickel Plated Single Action Army Flat Top Target Model Revolver with Factory Letter

This Colt Single Action Flat Top Target Model revolver with factory letter states this revolver was shipped to Hartley & Graham in New York City on March 17, 1890. The letter describes the revolver as caliber .32/20 with 7 1/2 inch barrel, nickel finish and rubber stocks. The revolver has the distinctive flat top frame with flat sides and dovetail mounted rear sight. The front sight has a solid base with adjustable removable nickel-silver blade. The revolver has a nickel-plated finish with niter blue rear sight and frame screws. The two-piece black hard rubber grips are checkered and have the Rampant Colt logo in an oval near the top and the eagle and shield motif at the base. The top of the barrel is roll-stamped with the legend "COLTS PT. F.A. MFG. Co. HARTFORD CT. U.S.A." and the left side is roll-stamped "32 W.C.F.". The caliber designation "32" is stamped on the underside of the barrel just ahead of the frame. "101" is stamped just behind the ejector housing stud. The left side of the frame is roll-stamped with the Colt "three-date/three-line" patent markings. A small "G" Colt inspection or assembly mark is stamped on the left front trigger guard bow and on the rear face of the cylinder. "S" is stamped in the hammer slot above the firing pin hole. The assembly number, "401" is stamped on the inside of the loading gate. The serial number is stamped on the frame, trigger guard and back strap. All of the visible serial numbers match. Out of a grand total of 43,264 first generation SAAs Colt manufactured in .32-20 WCF, only 30 were built with the standard flat top frame (see David Brown's "The 36 Calibers of the Colt Single Action Army" on page 190). Very few Flat Top Target Model revolvers with a factory nickel-plated finish (and this is most likely the only 32-20!). The combination of .32 WCF and factory nickel plated finish is very rare.

Class: Antique

Excellent. The revolver retains 85% plus of the original nickel-plated finish. The barrel and ejector housing retain most of the nickel-plating with some minor edge wear at the muzzle. The plated finish has flaked around the edges of the frame and top strap, the front and rear edges of the cylinder and on the edges of the back strap and grip strap. The rear sight and frame screws retain 80% of the faded niter blue finish. The serial numbers and the barrel and frame markings are sharp. The grips have faded to a deep brown and are both very good. The action is crisp and functions perfectly. This is an excellent example of an exceptionally rare factory nickel plated, .32 W.C.F. Colt Single Action Flat Top Target Model revolver. Writer cannot recall ever offering a documented nickel plated Colt Single Action Army Flattop Target Revolver!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 13,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Relief Carved Decorative Pedestal Cane

Lot # 1133 (Sale Order: 134 of 674)      

Attractive Ornate Relief Carved Decorative Pedestal Cane with Gold Band

Popular for centuries beginning in the 1500s, canes reached the pinnacle of their popularity among western cultures, particularly in Western Europe and North America, in the 18th and 19th centuries. Canes became especially popular among the wealthy and well respected in society, such as businessmen, lawyers, doctors, and nobility. The knob shaped grip of this cane has been very attractively relief carved with foliage around the upper portion, which is topped with an off-white clear gemstone, and a draped rope around the lower portion. The upper and lower portions of the grip are separated by a thin gold band that bears a faint, illegible inscription. The smooth shaft is of Malacca and tipped with brass. It measures 36 1/2 inches overall.

Class: Other

Very fine, the grip shows a lightly aged tone and attractive grain patterns with a few hairline age cracks and a minor chip absent from the bottom edge of the gemstone. The worn, loose gold band is bright. The shaft is very fine with some scattered very light handling marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 800.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Relief Carved Hound Head Cane

Lot # 1134 (Sale Order: 135 of 674)      

Attractive Relief Carved Hound Head Cane

Starting in the 16th century, canes and walking sticks became extremely popular, first among royalty and nobility, and by the 19th and 20th centuries having worked their way down to the middle classes as a symbol of status. Being most popular among the upper echelons of society, popular motifs for canes often featured prized and valuable horses or hunting dogs, such as this example. The grip of this cane has been relief carved in the form of a detailed hound or hunting dog's head. The grip is joined to the shaft with a silver band stylized as a studded collar for the hound, and marked "SOLID/SILVER". The shaft is of a knobbed hardwood and tipped with German silver and iron. It measures 35 1/2 inches overall.

Class: Other

Fine, the grip shows an attractively aged tone with some scattered hairline age cracks and a couple minor chips. The silver band shows an attractively aged patina. The shaft is also fine with some scattered light handling marks and hairline age cracks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 800.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Relief Carved Lion Head Cane with Silver Band

Lot # 1135 (Sale Order: 136 of 674)      

Attractive Relief Carved Lion Head Cane with Sterling Silver Band

During the 19th and 20th centuries, canes became incredibly popular as a status symbol, especially among the upper class in Western Europe and North America. This popularity also coincided with the pinnacle of the age of empire, in which much of the African continent was being colonized by the major powers of Europe. This cane would have been very fitting for a gentleman of one of those powers given its theme. The tusk shaped grip has been expertly relief carved with the snarling head and back of a male lion. The lion is fitted with glass eyes and metal teeth. The grip is joined to the shaft by a plain silver band which is "STERLING" hallmarked. The smooth shaft is ebonized and tipped with brass. It measures 35 3/4 inches overall.

Class: Other

Very good, the grip shows a few scattered hairline age cracks and an attractively aged tone overall. The silver band shows an attractively aged patina. The shaft has some scattered light handling marks and retains most of the ebonized finish.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 700.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Detailed Relief Carved Bust Cane

Lot # 1136 (Sale Order: 137 of 674)      

Detailed Relief Carved Bust Cane

Beginning in approximately the 16th century, canes gradually became more popular among the upper echelons of society, reaching its pinnacle around the late-19th to early-20th centuries. They became far more than just an accessory to assist with mobility, and more of a symbol of ones status and wealth. The grip of this cane has been expertly relief carved in the form of a bust of a person, either with a tall, bound hairstyle, or a tall straw hat. The smooth shaft is of Malacca and is tipped with brass. It measures 34 inches overall.

Class: Other

Very fine, the grip having a few scattered hairline age cracks and otherwise minimal handling evidence. The shaft is very good with some mild wear just below the grip showing a slightly lighter tone and attractively aged brass tip.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 650.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Pre-War/Post-War Colt Single Action Army Revolver

Lot # 1137 (Sale Order: 138 of 674)      

Outstanding Documented "One of Last Six Numbers" Pre-War/Post-War Colt Single Action Army Revolver with Factory Letter

This highly sought after Colt "Pre-War/Post-War" Single Action Army revolver was assembled c. 1947-48 using pre-war manufactured parts. According to "Colt's Single Action Army Revolver Pre-War Post-War Model" by Don Wilkerson on page 19, there were only 338 pre-World War II manufactured Colt Single Action revolvers assembled after World War II, which comprise the group of revolvers referred to as Pre-War/Post-War by collectors. This revolver is one of only one hundred sixty-three produced in this configuration (see page 28). The accompanying factory letter states the revolver was shipped to Richard A. Sherburne of Amherst, Massachusetts, on October 3, 1972 with a 5 1/2 inch barrel in .38 Special, blue finish, and hard rubber grips. This was a nine gun shipment. The letter also confirms its "Pre-War/Post-War" status: "Frame and parts were manufactured prior to World War II, but were assembled on February 13, 1948 and held at the Colt factory until shipped on October 3, 1972." The letter also confirms that this SAA was among the last six numbers of the First Generation model held at the factory. The selling of these Pre-War/Post War revolvers during this time directly coincided with the restarting of the production line for the Second Generation Colt Single Action Army revolvers in the early 1950s. Shipped in 1972 meant that this First Generation left the factory during the last years of Second Generation production, which ended in 1975. The last Pre-War/Post-War revolver was sold by the factory at auction in 1980. The barrel is marked with the one-line Hartford address on top and ""COLT SINGLE ACTION ARMY 38 SPECIAL" on the left side. The left side of the frame has the two-line patent dates marking followed by a Rampant Colt. The left side of the trigger guard has the Colt factory triangle proof and "F," indicating it was assembled by Colt Master Gunsmith Harry St. John. The matching assembly number "230" appears on the loading gate and rear of the frame. The matching full serial number appears on the frame, trigger guard, back strap, and both grip panels. The matching partial serial number "12" is stamped on the cylinder.

Class: Curio & Relic Handgun

Excellent, retaining 99% plus original blue and vivid casehardened finishes with very minimal handling marks. The grips are also excellent with crisp checkering. Mechanically excellent. This Peacemaker is an outstanding example of highly sought after Pre-War/Post-War model as well as one of the last First Generation SAAs to leave the Colt factory. Its condition and historical significance would be hard to improve upon.

Provenance: The Albert and Paula Brichaux Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 9,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

First Generation Colt Single Action Army Revolver

Lot # 1138 (Sale Order: 139 of 674)      

Excellent Pre-World War II First Generation Colt Single Action Army Revolver with Original Box

Manufactured in 1939, making it one of the last of the legendary first generation Peacemakers Colt manufactured. Only 934 SAAs were made after this one prior to World War II. This is an excellent example chambered in the iconic .45 LC caliber. The SAA is one of the most iconic firearms of the American west, and it, alongside the Winchester Model 1873, are often cited as the "guns that won the west". They remained popular well after the west was won. The barrel has the one-line Hartford address on top and "COLT SINGLE ACTION ARMY .45" on the left side. The left side of the frame is stamped with the two-line patent dates marking followed by a Rampant Colt. The left side of the trigger guard is marked with the number "4" over the Colt factory triangle proof. The revolver wears a set of silver Rampant Colt medallion grips. Colt commercial blue finish with casehardened frame and polish hammer sides. Matching assembly number "659" appears on the loading gate and back of frame. Matching serial numbers appear on the frame and right side of both grip straps under the grip panel. Colt factory records indicate the revolver was shipped on March 25, 1940 and no other information is available. The original Colt factory box is numbered to the gun and features an end label that confirms the 5 1/2 inch barrel, .45 caliber, grip material, and blue finish. A bore brush and "Shooting Suggestions" pamphlet are also included.

Class: Curio & Relic Handgun

Excellent, retaining 97% original blue finish showing light cylinder drag lines, scattered edge wear, and thinning on the back strap. The frame retains 98% original case colors with fading on the recoil shield and loading gate, otherwise colors are vivid. The grips are also excellent with a few handling marks and attractive color. The box is very fine with a couple repaired lid corners. Mechanically excellent. A very attractive pre-World War Colt SAA revolvers.

Provenance: Kurt House, former editor of The Rampant Colt; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 11,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Remington Model 1875 Single Action Army Revolver

Lot # 1139 (Sale Order: 140 of 674)      

Exceptional Remington Model 1875 Single Action Army Revolver

This is an extraordinary example of a Remington Model 1875 Single Action Army revolver that was manufactured c. 1875-1889. The revolver has a full nickel-plated finish with two-piece, varnished, walnut grips. The frame screws have a fire blue finish. The top of the barrel is roll-stamped: "E. REMINGTON & SONS. ILLION. N.Y. U.S.A.". The caliber designation "44" is stamped on the left side of the frame ahead of the cylinder. The serial number, "616", is stamped on the left side of the frame beneath the grip and on the loading gate arm. "616" is penciled on the inside of both grips. All of the visible serial numbers match. The butt is not fitted with the lanyard ring found on some Remington Model 1875 revolvers. The Model 1875 Single Action Army revolver was designed to compete with the Colt Single Action Army. Remington manufactured approximately 25,000 of these well-designed revolvers between 1875 and 1889. The U.S. Department of the Interior purchased 1,300 nickel-plated Remington Model 1875 revolvers in 1884 to arm Indian Police.

Class: Antique

Excellent. The revolver retains 97% plus of the original nickel-plated finish. Wear is limited to some very minor age spotting over one chamber and one cylinder flute and scattered minor handling marks. The frame and grip screws have nearly all of the fire blue finish. The two-piece grips are both in exceptionally fine condition. Wear is limited to some minor finish loss on the left grip between the screw escutcheon and the frame and a few scattered storage and handling marks. The barrel markings and caliber markings are both crisp. Mechanically excellent. This extraordinary Remington Model 1875 Single Action Army Revolver would be nearly impossible to improve upon!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 8,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

U.S. Smith & Wesson First Model Schofield Revolver

Lot # 1140 (Sale Order: 141 of 674)      

Desirable U.S. Smith & Wesson First Model Schofield Revolver

This is a fine original example of a First Model Schofield Single Action revolver. A total of 3,035 of these were manufactured in 1875 with seven inch barrels, walnut grips and blue finish as the standard finish. The distinctive features of this revolver are the barrel catch attached to the frame rather than the top strap, the gracefully shaped frame and shorter ejector housing. The U.S. Ordnance Department ordered almost the entire production. Many were issued to the 4th Cavalry and the black troops of the 9th and 10th U.S. Cavalry, the "Buffalo Soldiers" of the Indian Wars. Some notorious outlaws and lawmen of the Old West were known to have carried a Schofield as well. The left side of the ejector housing is marked with the two line address/patent dates and "SCHOFIELD'S PAT APR 22D 1873" on the right side. The toe of the back strap is marked "US". The matching serial number is marked on the butt, rear cylinder face, with the letter "L" below it, and on the inside of the right grip panel. The letter "L" also appears on the frame under the cylinder, and the bottom of the ejector housing flat is marked "LP". Blue finish with casehardened hammer and trigger guard, pinned blade front sight and fitted with smooth walnut grips.

Class: Antique

Fine. The revolver retains 40% original blue finish, concentrated mainly on the frame sides and protected areas of the barrel, with a smooth mottled brown patina on the balance. The hammer and trigger guard retain strong original case colors in protected areas with a smooth gray patina on the balance. The grips are also fine with a few scattered minor dings and scratches. The markings are clear. The cylinder has a bit of play, otherwise the action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 5,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson No. 3 Third Model Russian Single Action Revolver

Lot # 1141 (Sale Order: 142 of 674)      

Smith & Wesson No. 3 Third Model Russian Single Action Revolver

This variation of the Smith & Wesson No. 3 is also known as the "Model 1874," "Cavalry Model," and "New Model Russian". This model is easily identified by the large thumbscrew on the top strap, integral blade front sight, trigger guard spur, and humpback grip strap. The barrel is marked with the long one line patent ending with "RUSSIAN MODEL" flanked with Maltese crosses on the rib. The butt has the Schuyler Hartley & Graham diamond marking along with a lanyard ring. The right grip panel is numbered to the gun. Matching assembly numbers appear on the grip frame, cylinder, barrel, and barrel latch.

Class: Antique

Very fine, retaining 95% period retailer applied nickel plating showing some flaking mostly on the back strap. 30% original case colors remain on the trigger guard. The grips are also very fine with some minor handling marks. Mechanically fine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson New Model No. 3 Single Action Revolver

Lot # 1142 (Sale Order: 143 of 674)      

Smith & Wesson New Model No. 3 Single Action Revolver with Scarce 8 Inch Barrel

In 1878 S&W introduced the New Model No. 3, and it was an instant success. Its design drew on handling and mechanical improvements from its popular predecessors, the American, Russian and Schofield models, and spawned a series of wide ranging variations, including a target model that dominated target competition in the late 19th century. This example has a non-standard 8 inch barrel which is marked "44 S&W CTG" on the left side. This model rarely had caliber markings. Fitted with a pinned Lyman beaded blade front sight and adjustable "U" notch rear sight. The barrel latch is non-matching. Matching serial numbers appear on the butt, cylinder, and barrel.

Class: Antique

Fine, retaining 60% plus original blue finish with the balance a smooth brown patina. The trigger guard has faded to a gray. 60% original case colors remain on the hammer. The grips are as fine with some handling marks and overall crisp checkering. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,000.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson No. 3 Second Model Russian Single Action Revolver

Lot # 1143 (Sale Order: 144 of 674)      

Unusual Unserialized Smith & Wesson No. 3 Second Model Russian Single Action Revolver with Charles W. Pate Letter

Manufactured circa 1873 to 1878 this model is commonly known as the Old Model Russian and is easily recognizable by the spurred trigger guard. The Second Model Russian was also manufactured with a 7 inch solid rib barrel and features a pinned blade front sight and notch rear sight on the barrel latch. This is an unusual example as it lacks a serial number. In his accompanying letter, noted firearms historian Charles W. Pate stated, "The most significant feature of this revolver is that there are no serial numbers anywhere on the pistol. Instead, the pistol is marked with two punch marks...I have not previously seen revolvers marked with only a pair of punch marks as the assembly mark." Pate concluded "that this pistol was indeed unique and was assembled by a workman who used the pair of punch marks as his identifying mark...I cannot explain why it was built, however, the factory is known to have produced other Russian Model oddities, one of which was marked with the letter 'S' on all the major parts instead of with a serial number." The pair of punch marks appear on the butt at the heel, back of each grip panel below the screw, left side of grip frame (assembly marks generally stamped on right side), back of cylinder above a tiny "D", barrel latch, frame between the barrel latch cut-out, and left side of the back of barrel. The barrel rib has the one-line S&W legend ending with "RUSSIAN MODEL." Small "B" on the underside of the barrel and back of left side of the frame.

Class: Antique

Exceptionally fine, retaining 95% plus original nickel plating. The grips are very fine with high edge wear and some minor dings and scratches. Mechanically excellent. An unusual unserialized S&W No. 3 Second Model Russian revolver that is a must have for the serious S&W collector. Writer cannot recall another!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 3,500.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson Model 3 Transitional American Revolver

Lot # 1144 (Sale Order: 145 of 674)      

Smith & Wesson Model 3 Transitional American Single Action Revolver

Transitional Americans are found in the approximately 3,200-3,700 and 6,000-8,000 with this example no. 7319 falling in the generally excepted latter range. Transitional models are distinguished by a shorter 1.423 inch cylinder, a 2nd American style interlocking hammer and latch, and a 1st American style flat bottom frame. The barrel rib has a period modified pinned rounded blade front sight and is stamped with the one-line S&W address/patent dates legend. Matching serial numbers appear on the butt, right grip panel, cylinder, barrel, and barrel latch.

Class: Antique

Fine, retaining 50% bright original high polish blue finish with a smooth brown-gray patina on the balance. Traces of original case colors remain on the hammer and trigger guard. The grips are also fine with a coat of protective varnish, scattered handling marks, and mild high edge wear. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 2,250.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

U.S. Smith & Wesson First Model Schofield Single Action Revolver

Lot # 1145 (Sale Order: 146 of 674)      

U.S. Smith & Wesson First Model Schofield Single Action Revolver

This revolver is one of 3,000 First Model Schofields purchased by the U.S. Government. They were used by the U.S. Army for only a few years before being sold as surplus on the civilian market and used in the West by Wells Fargo Express agents and many others. This example remains in its original military configuration. The U.S. military markings include "US" stamped on the butt, "L" and "P" stamped on the barrel, and "L" on the frame. Grips lack a visible cartouche. Matching serial numbers appear on the butt, right grip panel, and cylinder.

Class: Antique

Very good, retaining 30% plus original blue finish with a mix of smooth brown and gray patinas on the balance and some scattered pitting which has been cold blued on the rear right side of frame. The grips are also very good with some chipping along the worn high edge, an indentation on the left panel, and scattered handling marks. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

High Bid: USD 3,000.00

You've been outbid  by b****5! by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson New Model No. 3 Single Action Revolver

Lot # 1146 (Sale Order: 147 of 674)      

Smith & Wesson New Model No. 3 Single Action Revolver

Introduced in 1878. The revolver has the two-line S&W address/patent dates barrel rib marking, S&W monogram embossed checkered hard rubber grips, and matching serial numbers on the butt, right grip panel, cylinder, barrel, and barrel latch.

Class: Antique

Very fine, retaining 80% original nickel plating. 40% plus original case colors remain on the hammer and trigger guard. The faded grips are fine with overall crisp checkering. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,600.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson Russian 2nd Model Single Action Revolver

Lot # 1147 (Sale Order: 148 of 674)      

Smith & Wesson Russian 2nd Model Single Action Revolver

Manufactured from 1873 to 1878. The barrel rib has the one-line address/patent dates legend ending in "RUSSIAN MODEL." The butt has the Schuyler Hartley Graham distributor "SH" in a diamond marking along with a lanyard ring hole. Matching assembly numbers appear on the grip frame, cylinder, barrel, and barrel latch.

Class: Antique

Fine, having the appearance of spending time in a challenging environment with 70% plus original nickel plating remaining. The shrunken grips are very good showing a very attractive mellow aged appearance and some typical age lines on the bottom. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,600.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson Russian 2nd Model Single Action Revolver

Lot # 1148 (Sale Order: 149 of 674)      

Smith & Wesson Russian 2nd Model Single Action Revolver

Manufactured from 1873 to 1878. The barrel rib has the one-line address/patent dates legend ending in "RUSSIAN MODEL." The butt has the Schuyler Hartley Graham distributor "SH" in a diamond marking along with a plugged lanyard ring hole. The right grip panel is numbered to the gun. Matching assembly number "124" appears on the grip frame, cylinder, barrel, and barrel latch.

Class: Antique

Fine, retaining 70% original nickel plating with a series of numerous dings on the right side of the barrel. The undersize grips are very good with a short crack near the top (left panel) and minor handling marks. Mechanically needs work as cylinder does not always rotate when action is cycled.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,600.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met

Smith & Wesson No. 3 Russian 3rd Model Revolver

Lot # 1149 (Sale Order: 150 of 674)      

Smith & Wesson No. 3 Russian 3rd Model Revolver

Manufactured from 1874 to 1878. Barrel rib legend ends with "RUSSIAN MODEL." The two-line re-issue patent date is marked on the topstrap just ahead of the large screw. The butt has a lanyard ring and a five-pointed star (star-stamped Russian). Right grip panel numbered to a different gun. Matching assembly number "6496" on the grip frame, cylinder, barrel, and barrel latch.

Class: Antique

Fine, retaining 60% plus factory refurbished nickel plating with some pitting. Traces of original case colors remain on the hammer and trigger guard. The very good re-oiled grips have been modified during the revolver's service life to fit the needs of the owner. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Opening Bid: USD 1,600.00

You've been outbid  by YOU!

Placing your bid. please wait...

Reserve Not Met
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 6 of 27

1.178.0.836.d2a4bd2.9.140