Premier Firearms Auction - Day 1

Premier Firearms Auction - Day 1

Friday, May 17, 2024  |  9:00 AM Central
Auction closed.
Premier Firearms Auction - Day 1

Premier Firearms Auction - Day 1

Friday, May 17, 2024  |  9:00 AM Central
Auction closed.
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 10 of 27

Civil War E. Remington & Sons New Model Army Revolver

Lot # 227 (Sale Order: 226 of 664)      

Very Fine Civil War U.S. Contract E. Remington & Sons New Model Army Percussion Revolver

Remington's revolvers were the second most widely issued by the Union throughout the Civil War. The New Model Army was manufactured from 1863-1875 and represents the last of Remington's .44 caliber percussion revolvers. "PATENTED SEPT. 14. 1858/E. REMINGTON & SONS. ILION NEWYORK.U.S.A./NEW-MODEL" marked in three lines on the top barrel flat. Matching serial numbers located on the barrel, trigger guard finial (hidden, requires disassembly), left of the grip frame, and handwritten on the underside of both grip panels. The cylinder is unnumbered. Single letter sub-inspection marks located on various components. Boxed script "BH" inspection cartouche stamped on the left grip panel. Threaded "pinched" blade front sight and top strap groove rear sight.

Class: Antique

Very fine, retains 75% plus original blue finish with some flaking and smooth brown and gray patina on the balance, some light scratches, and sharp markings and edges in the metal. The grips are also very fine with some minor wear on the otherwise defined edges, a few light handling marks, and a crisp cartouche and sub-inspection stamps. Mechanically excellent.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Remington Army Model 1871 Rolling Block Pistol

Lot # 228 (Sale Order: 227 of 664)      

Fine U.S. Remington Army Model 1871 Rolling Block Pistol

Only around 6,000 Army Model 1871 Rolling Block Pistols were manufactured by Remington in the 1870s and 1880s with about 5,000 sold to the U.S. Army. They were inspected by Curtis R. Stickney whose script initials "CRS" are on the left side of the grip. These were the last single shot U.S. martial pistols. Those in high condition like this one are especially valuable. The pistol has an 8 inch blue barrel, casehardened frame with distinctive hump on the back strap, niter blue trigger, and bright hammer and breechblock . The left side of the frame has the "P S", which stand for "Proofed" and "Stickney," as well as marked with the two-line address/patent dates marking. It has standard fixed sights. The one-piece smooth walnut grip is numbered to the gun, and both grip straps have matching assembly numbers.

Class: Antique

Fine. The barrel retains 85% original high polish blue finish. The breech block and hammer have a bright appearance with some pitting .The receiver and trigger guard retain 85% plus original case colors with some scattered spots of dark pitting visible on the left of the frame. The re-oiled grip is also fine with some minor handling marks and a crisp cartouche. Mechanically excellent.

Provenance: The Milan J. Turk Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Colonel Daniel M. Ray Presentation Sword with Scabbard

Lot # 229 (Sale Order: 228 of 664)      

Historic Highly Embellished Schuyler, Hartley & Graham U.S. Civil War Cavalry Officer's Presentation, "Quill Tip" Damascus Blade Sword with Relief Chiseled Silver Grip, Gilt Ornamentation, and Scabbard Inscribed to Colonel Daniel M. Ray of the U.S. 2nd East Tennessee Cavalry with Extensive Documentation

This is an exceptionally fine and highly embellished example of a non-regulation Civil War sword from Schuyler, Hartley & Graham of New York, which was presented to Colonel Daniel M. Ray of the 2nd East Tennessee Cavalry Regiment in the Union Army. Daniel M. Ray was born on a farm in North Carolina on 27 March 1833, where he received part of his education before moving to Dandridge, Tennessee, and receiving the rest. The outbreak of the Civil War in 1861 was problematic for Ray, who is noted as having had strong convictions for the Union, believing no state should secede. Initially, Ray organized a group of other like-minded people from eastern Tennessee and began to sabotage Confederate military operations in the area. Around December of 1861, Ray accepted a lieutenant’s commission and was appointed adjutant in the 3rd Tennessee Infantry Regiment (Union), a post he held until 31 August 1862.In August of 1862, Ray resigned his post in the 3rd Tennessee to accept a commission as colonel of the newly formed 2nd East Tennessee Cavalry regiment. In late 1862, the regiment was attached to the Army of the Cumberland and took part in operations around Murfreesboro in central Tennessee. In December of 1862, the regiment took part in their first major engagement, the Battle of Stone’s River. After the Battle of Stone’s River, Ray was given command of the 2nd Cavalry Brigade of the 1st Division (at times transferred to the 2nd Division). This brigade included the 2nd Tennessee, 2nd Indiana, 4th Indiana, 1st Wisconsin, and Battery D of the 1st Ohio Light Artillery. It is noted in sources pertaining to Ray that he was offered a brevete rank when given this command but refused it, stating that he preferred “to be colonel with a reputation rather than a general without one.” The brigade remained heavily involved in all the operations of the Army of the Cumberland through 1863, with cavalry operations being a primary focus of these campaigns. They were part of the operations against Pegram and Franklin, the expedition to McMinnville, operations around Alexandria, and the Tullahoma Campaign. In the autumn of 1863, Ray’s brigade had crossed the Cumberland Mountains and Tennessee River with the army and was heavily involved in the Chickamauga Campaign, culminating in the Union defeat at the Battle of Chickamauga. Included documentation with this sword indicates that Ray carried two swords, one of which was lost/captured at Chickamauga. It is likely that the sword captured at the battle was one of a more utilitarian form, as this sword was presented to Ray just a few months before the battle and is documented as having remained in the family. By the end of 1863, these rigorous campaigns had taken their toll on Colonel Ray, and his health was failing. On 13 February 1864, Ray wrote a letter of resignation from his command due to his degrading health and returned to East Tennessee. Due to the extreme factionalism and discontent in Tennessee, Ray decided to move his family to Illinois in 1866, where they stayed briefly before moving on to Woodson County, Kansas, where he lived for the next 43 years. It is noted in the documentation that on his 80th birthday he proudly showed off his various war mementos, including this sword, and then 12 days later died on 7 April 1913. From there it notes that this sword first passed to Ray’s son Phillip, and then on to his grandson, and then his great-granddaughter Margaret Lanphier, from who it passed into various private collections before now being offered here. The sword itself is an exceptionally attractive and quite unique example of a non-regulation officer’s presentation sword which was retailed by Schuyler, Hartley & Graham of New York c. 1862-1863. It measures approximately 38 3/8 inches overall with 32 7/8 inch, slightly curved blade, similar to the profile of an M1850 officer’s sword. This blade however shows Damascene patterns throughout the steel and has a very attractive “quill tip” or “pipe-back” design which broadens slightly for the final third to the tip, which is not often seen on even non-regulation presentation swords. The lower half of the blade on both sides has extensive etching showing floral and martial motifs, “E PLURIBUS UNUM” in a banner on the right, and the Schuyler, Hartley & Graham marking on the right ricasso, with gilt accents throughout. There is a scalloped brass rain guard at the base of the blade where it meets the guard
more... Provenance: The Family of Colonel Daniel M. Ray; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Henry Rifle Owned by Christian Krauss US 3rd Veteran Volunteers

Lot # 230 (Sale Order: 229 of 664)      

Historic and Exceptional Engraved Civil War Martially Inspected New Haven Arms Co. Henry Lever Action Rifle Identified to a Member of the U.S. 3rd Veteran Volunteer Infantry

This fantastic Civil War Henry lever action rifle was manufactured by the New Haven Arms Co. in c. March 1865 and falls within the same range as the rifles purchased by the U.S. Government for the 3rd Veteran Volunteer Infantry. It has the later production features and has a squareback German silver blade front sight, notch and folding ladder rear sight with 900 yard top notch, no alternate rear sight dovetail on the frame, "HENRY'S PATENT. OCT. 16. 1860/MANUFACT'D BY THE NEWHAVEN ARMS CO. NEWHAVEN CT." stamped ahead of the rear sight, "8636." stamped behind the rear sight, the large diameter brass follower with beveled follower cut in the receiver, "&" on the lower tang, buttplate with sharply pointed heel, takedown steel cleaning rod in the buttstock compartment, and the standard sling swivel and screw mounted sling loop on the left side of the stock and barrel respectively. A "JT" U.S. inspector stamp is visible on the left top side of the wrist. The frame and buttplate feature primarily floral and scroll engraving patterns along with a banner design on the right side plate and Columbia's shield and pair of Union flags on the left side plate. The engraving style on this Henry and others associated with the 3rd Veteran Volunteer Infantry has been attributed to Lewis Reibrecht of Company B. He was born in Germany in 1839 and is believed to have arrived in the U.S. shortly before the Civil War. He served as a musician in Company B of the 27th Pennsylvania Volunteer Infantry. He enlisted in the 3rd U.S. Veteran Volunteer Infantry on March 29, 1865. At that time, his "Volunteer Enlistment form" listed his occupation as an "engraver." He and the rest of Company B were stationed at Camp Butler in Illinois and then Camp Randall in Wisconsin. They remained at the latter until March 1866. He later worked as a jeweler and engraver in Newark, New Jersey, until his death in 1904. The patterns, particularly on the sideplates, are very similar to Henry #7594 sold by Rock Island Auction Co. in August 2022 for $55,813. That rifle was documented as issued to George Bemfor of Company B. Reibrecht's own engraved Henry, #7419, was sold at Rock Island Auction in April 2013 for $74,750. "The Historic Henry Rifle" by Wiley Sword also identifies other rifles issued to the 3rd Veteran Volunteer Infantry, including close serial numbers #8634, 8635, and 8639.Until 2015, this historic Henry rifle had its incredibly rare dust cover present. The cover was engraved in the same style as the rifle and was inscribed "Chr KrauSs." The cover was tragically lost, but it identified the rifle's original owner: Christian Krauss (also spelled "Krouse" or "Krause" in some records), a private in Company F of the 3rd Regiment U.S. Veteran Volunteer Infantry who previously served in Company A of the 4th New Jersey Infantry. The 4th was originally raised for 90 days service on April 27, 1861, and then was reorganized to serve for three years on August 19, 1861. During the war, the regiment saw extensive service in the East and lost 266 men, including 5 officers and 156 enlisted men killed or mortally wounded. Colonel Simpson and 400 of the men were captured at the Battle of Gaines Mill on June 27, 1862, but they were freed and back to fighting after the Seven Days battles, including at the Battle of Antietam on September 16-17, 1862, and Krauss is listed as discharged from the 4th on March 21, 1863.

Class: Antique

Exceptionally fine with 50% plus original blue finish remaining on the barrel along with some smooth gray and brown patina and minor oxidation, attractive aged patina on the very fine crisp frame and furniture, 50% original case colors on the hammer, crisp engraving and markings, and mild age and storage related wear overall. The stock is very fine and has mild scratches and dings, a distinct "Henry bump" under the sling swivel on the left, and general minor wear for a Civil War Henry. Mechanically excellent. The rifle does not appear to have seen much use and is certainly one of the finest engraved Henry rifles from the U.S. 3rd Veteran Volunteer Infantry.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 35,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Ball Repeating Carbine

Lot # 231 (Sale Order: 230 of 664)      

Outstanding Civil War Ball Repeating Carbine

This Civil War era Ball Repeating Carbine that was manufactured by Lamson & Co. of Windsor, Vermont, between 1864 and 1865. The Ball carbine featured a lever action and 7-shot tube magazine. The carbine has a near full length walnut forearm secured by two barrel bands and has a steel cleaning rod mounted on the right side of the forearm. The barrel has a iron half-moon front sight and two leaf rear sight with sight notches marked "1", "4" and "6." A sling bar with ring is mounted on the left side of the receiver. The carbine has a brown finish on the barrel and color casehardened forearm cap, barrel band, receiver, breechblock, hammer, lever, trigger and buttplate. The screws and small components are niter blue. The stock and forearm are straight grain American walnut. The left side of the receiver is marked "E.G. LAMSON & CO./WINDSOR VT./U.S./BALLS PATENT/JUNE 23 1863/MARCH 15 1864" ahead of the sling bar mount. An Ordnance final inspection mark which consists of the script initials "GGS" surrounded by an oval border is stamped on the left stock flat. A block "P" is stamped on the stock between the Ordnance inspection mark and the receiver. The Ordnance sub-inspector's block initials "GGS" are stamped on the stock comb ahead of the buttplate and on the underside of the forearm. A "S" sub-inspection mark is stamped on the barrel, barrel bands, rear sight, receiver, breechblock, hammer, sling bar mount and buttplate. Lamson & Co. manufactured a total of 1,002 Ball Repeating Carbines for the Ordnance Department. These carbines were delivered in May 1865.

Class: Antique

Excellent plus, as issued. The barrel retains 97% plus original brown finish showing some minor thinning, some loss at the muzzle and marks caused by the barrel bands. The remaining metal surfaces retain 98% vivid original case colors. The buttplate has a collector or museum number. The wood is excellent with a long scratch on the wrist (left side) and chipping near the buttplate toe, otherwise some minor pressure dents and scratches. The cartouche is crisp. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Burnside Rifle Co. 5th Model Breech Loading Carbine

Lot # 232 (Sale Order: 231 of 664)      

Excellent Civil War U.S. Burnside Rifle Co. 5th Model Breech Loading Percussion Carbine

This exceptional Civil War Burnside breech loading carbine was manufactured by the Burnside Rifle Company in Providence, Rhode Island c. 1864-1865. The carbine has the guide screw in the center of the right side of the frame which distinguishes 5th Model Carbines from earlier variations. The carbine has a blued barrel, breechblock, upper and lower receiver tangs and outer breech lever. The barrel band, receiver, hammer, inner breech lever and buttplate have color casehardened finish. The stock and forearm are black walnut with an oil finish. The carbine has a two-leaf folding rear sight mounted on the barrel and sling bar and ring on the left side of the receiver. The top of the barrel is roll-stamped: "CAST STEEL 1864". The top of the receiver is marked: "BURNSIDE PATENT/MODEL OF 1864". The right side of the lock plate is stamped: "BURNSIDE RIFLE Co./PROVIDENCE=R.I." in two lines. The serial number is located on the top of the receiver and breechblock. Small single letter sub-inspector marks are stamped on most components. Small "N.S.P." sub-inspection marks are stamped on the underside of the forearm and trigger guard comb. A "RKW" cartouche is stamped on the left side of the stock wrist.

Class: Antique

Excellent. The carbine remains nearly as issue with 97% plus of the original blue finish, 90% plus nitre blue finish, and 97% vivid case colors remaining with some slight fading from age and very minor handling and storage marks. The stock and forearm are also excellent with a crisp cartouche and inspection marks, raised grain, a scrape on the forearm, otherwise minor dings, and smooth oil finish. Mechanically excellent.

Provenance: The Al Cali Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Burnside Rifle Co. Model 1865 Spencer Repeating Carbine

Lot # 233 (Sale Order: 232 of 664)      

Very Fine U.S. Contract Burnside Rifle Co. Model 1865 Spencer Patent Repeating Carbine

The Burnside Rifle Co. manufactured Spencer carbines in 1865-66. Spencers continued to be used by the U.S. Army in the American West after the Civil War during various conflicts with Native American tribes until they were replaced by the Springfield Trapdoor rifles and carbines. Some of these Burnside Spencer carbines were sold as surplus to France for use during the Franco-Prussian War and that is likely the case with this example given the 1890s German "crown/V" marks on the barrel and frame at the breech. It otherwise has the standard markings and features of the Burnside Model 1865 Spencers and is equipped with the Stabler cut-off. Many of the U.S. surplus arms sold to the French were never used, but you still very rarely see a Spencer made after the end of the Civil War that has crossed the pond twice and remains in this high level of condition!

Class: Antique

Very fine with 80% plus original blue finish, 70% original case colors with fading from age, pitted rear sight base, and generally minor storage related wear overall. The wood is also very fine and has distinct cartouches, mild scratches and dents, smooth oiled finish, and general mild wear. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War American Machine Works Smith Breech Loading Carbine

Lot # 234 (Sale Order: 233 of 664)      

Excellent Civil War American Machine Works Smith Breech Loading Percussion Carbine

A total of 30,362 Smith carbines were reportedly purchased by the United States government during the Civil War. Smith carbines were considered to be one of the most important Federal Cavalry carbines and were known to be accurate and reliable weapons. Nearly all of the Smith carbines manufactured were issued to Union cavalry units and saw hard use during the Civil War, and somehow this example appears to have remained essentially in "as issued" condition. It has standard markings and features, "L.F.R" inspection initials on the left of the breech, "H.D.H." on the bottom of the forearm, "JH" inspection initials ahead of the buttplate, and a crisp oval script "JH" inspection cartouche stamped on the left of the wrist.

Class: Antique

Excellent with 95% plus of the original blue finish and 97% vivid original case colors, minor loss mainly on the buttplate and barrel band, and some light scratches and storage marks. The wood is also excellent and has a crisp cartouche, smooth oiled finish, raised grain, and minor scratches and dings. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Providence Tool Co. Peabody Rimfire Saddle Ring Carbine

Lot # 235 (Sale Order: 234 of 664)      

Excellent Providence Tool Co. Peabody Rimfire Saddle Ring Carbine

These were manufactured by the Providence Tool Co. of Providence, Rhode Island, c. 1866-1871. The Peabody carbine was developed and tested in 1864, but the end of the Civil War terminated Ordnance Department interest in it. Large numbers of Peabody rifles and carbines were sold to Canada, Mexico, Switzerland, Romania, Spain, and France for use in the Franco-Prussian War. Post-war sales of Peabody rifles and carbines in the United States were limited to three state contracts. South Carolina purchased 350 .50 caliber Peabody carbines originally manufactured for a French contract. The carbine has a military blue barrel with block front sight and two-leaf folding rear sight. The barrel band, receiver, breech block, hammer, side plate, lever, and buttplate are color casehardened. A staple-mounted carbine sling ring is mounted at the junction of the left side of the stock and the receiver. The stock and forearm are oil-finished black walnut. The left of the receiver is roll-stamped "PEABODY'S PAT./JULY 22. 1862/MAN'F'D BY/PROVIDENCE TOOL CO./PROV. R.I." in five lines. Small single block letter sub-inspection marks on most components. An oval "W.C." Providence Tool Co. inspection mark, stamped on all Peabody carbines manufactured for foreign contracts, on the left of the stock wrist.

Class: Antique

Excellent, retains 97% original blue finish and 98% vivid original case colors, with sharp markings and edges in the metal overall. Wood is also excellent with attractive original raised grains and rich oil finish, a few light handling marks, a long sliver of absent wood behind the lock, distinct edges and an exceptionally crisp cartouche. Mechanically excellent. This exceptional example of a Providence Tool Co. Peabody carbine would make a fine addition to any early martial firearms collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

LeMat "Grapeshot" Percussion Revolver with Sword

Lot # 236 (Sale Order: 235 of 664)      

Historic Civil War Second Model London LeMat Two-Barrel Percussion "Grapeshot" Revolver with Sword

Patented in 1856 by Dr. Jean Alexandre Francois LeMat of New Orleans, Louisiana, the LeMat revolver was a unique pistol that combined a 9 shot .42 caliber percussion revolver with a 16 gauge smoothbore grapeshot barrel. The grapeshot barrel served as the center axis for the cylinder. The Second Model, Paris made, LeMat revolvers had a full octagon upper barrel with a loading lever mounted on the left side, rounded trigger guard with no spur, pull-out assembly latch, butt with a lanyard ring hole and hammer with center mounted pivoting striker. In the upper position, the striker engages the percussion nipples in the cylinder, and, it contacts the percussion nipple for the shot barrel in the lower position. The top of the barrel is engraved "Systeme Le Mat Bte. s. g. d. g. Paris" in Old English style script. The right barrel flat is stamped with the serial number, "1949", followed by the LeMat logo which consist of a star above the letters "LM". The serial number, "1948", is also stamped on the right side of the frame below the cylinder and on the side of the cylinder. Total production of LeMat revolvers in Liege, Paris, and London was less than 2,900 between 1856 and 1865, and this example was manufactured c. 1863. During the Civil War, the Confederate government awarded contracts for 900 LeMat revolvers for the Army and 600 revolvers for the Navy. Many senior Confederate officers, most notably cavalry commander General J.E.B. Stuart, carried LeMat revolvers. General Stuart carried a LeMat revolver when he was mortally wounded at the Battle of Yellow Tavern, Virginia, in 1864. The unmarked Confederate officer's pattern sword has a lightly curved 30 1/2 inch blade with a wide fuller, a dark leather blade washer, floral and scroll patterns on the hilt, and black leather and twisted wire wrapped grip. The revolver and sword are accompanied by a Sons of Confederate Veterans certificate indicated that the consignor was a descendant of Corporal Giovanni Batta Rossi of Co. F, Cazadores Espanoles, Louisiana Militia.

Class: Antique

The revolver is very good overall and has an overcoat of golden varnish over much of the metal and wood and some patches of silver-gray patina showing through along with mild pitting. The markings are distinct, and the grips have distinct checkering with some worn spots. The sword is fair. The blade had mottled gray patina and patches of mild pitting. The hilt has a mix of aged patina and brick red coloration. The grip is worn and has only traces of wire wrap remaining.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Era Butterfield Army Model Revolver

Lot # 237 (Sale Order: 236 of 664)      

Very Scarce Civil War Era Butterfield Army Model Percussion Revolver

The Butterfield Revolvers were manufactured by Jesse Butterfield of Philadelphia, Pennsylvania, in 1862. They are considered by collectors to be secondary U.S. martial handgun since they were manufactured in anticipation of an unrealized government contract. Because no contract was awarded, production was limited to only about 640 revolvers. It is equipped with a special disc priming device loaded by loosening a thumb-screw in front of the trigger guard. The top strap is marked "BUTTERFIELD'S/PATENT DEC 11. 1855/PHILADA". The matching serial number "236" is visible on various components.

Class: Antique

Very good with the brass showing an attractive golden aged patina, traces of original silver finish visible in some of the protected areas, professionally made replacement cylinder pin, loading lever assembly and catch, and scattered light to mild pitting and freckling on the iron surfaces with brown patina. The refinished grips are also very good, with scattered light scratches and handling marks, re-stamped numbers on the butt, and some reattached spliced sections on both grip panels. Mechanically fine.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Savage Revolving Firearms Co. Navy Percussion Revolver

Lot # 238 (Sale Order: 237 of 664)      

Civil War Savage Revolving Firearms Co. Navy Percussion Revolver

Manufactured by the Savage Revolving Fire Arms Co. of Middletown, Connecticut c. 1861 to the mid-1860s. Of the 20,000 Savage Navy revolvers manufactured between 1861-1865, the Ordnance Department purchased 11,984 of these distinctive revolvers. Features a heart shaped trigger guard with round cocking lever, off-set hammer, six-shot gas-sealing cylinder, octagon barrel, and hinged loading lever. The top strap is roll-stamped "SAVAGE R.F.A.Co.MIDDLETOWN. CT/H.S.NORTH PATENTED JUNE 17 1856/JANUARY 18 1859. MAY 15 1860" in three lines. This example shows no ordnance inspector's markings and was likely sold on the commercial market during the war, making it comparatively rarer than the U.S. inspected examples. The back of the left grip is marked "ROBERT E. EBY." Both grips also have the matching serial number.

Class: Antique

Very good plus with 50% original blue finish on the barrel and loading lever housing, mostly dark gray patina on the balance, some minor pitting, and general mild overall wear. The grips are also very good with repaired cracks, small chips, and mild scratches. Mechanically fine.

Provenance: The Robert E. Eby Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Starr Model 1858 Army Double Action Revolver

Lot # 239 (Sale Order: 238 of 664)      

Fine Civil War U.S. Martially Inspected Starr Model 1858 Army Double Action Percussion Revolver

The Starr Model 1858 and Model 1863 revolvers as a group were the third most widely used revolvers by the Union forces during the Civil War. Approximately 23,000 Model 1858 Army revolvers were manufactured in the late 1850s to early 1860s, with 21,000 reportedly sold to the U.S. government. The frame has the New York address on the left side and the 1856 patent date on the right. Most of the components have single letter inspection marks. All matching visible serial numbers "13407" marked on the front surface of the frame below the loading lever, underside of the barrel, inside of the hammer well (partially visible), hammer, cylinder, left side of the front grip strap, underside of the rear grip strap, and stamped on the top surface of the one-piece walnut grip. Crisp boxed script "ABB" (A.B. Blackington) and "CSL" (Charles S. Lowell) inspection cartouches stamped on both sides of the grip at the bottom.

Class: Antique

Fine, retains 60% original blue finish with scattered patches of flaking and smooth brown and gray patina on the balance, 70% vivid original case colors on the loading lever and hammer with the trigger turned to a smooth gray, and sharp markings and edges in the metal overall. Grip is also fine with defined edges, some scattered light handling marks and nicks, and crisp cartouches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Remington New Model Army Revolver with Holster

Lot # 240 (Sale Order: 239 of 664)      

Fine Civil War U.S. Contract E. Remington & Sons New Model Army Percussion Revolver with Holster

Remington's revolvers were the second most widely issued by the Union throughout the Civil War. The New Model Army was manufactured from 1863-1875 and represents the last of Remington's .44 caliber percussion revolvers. "PATENTED SEPT. 14. 1858/E. REMINGTON & SONS. ILION NEWYORK.U.S.A./NEW-MODEL" marked in three lines on the top barrel flat. Full and partial serial number "97117" is located on the bottom of the barrel, left of the grip frame, trigger guard lug (hidden, requires disassembly), and faintly handwritten on the underside of both grip panels. The cylinder is unnumbered. Single letter sub-inspection marks located on various components. Boxed script "OWA" (Orville W. Ainsworth) inspection cartouche stamped on the left grip panel. Threaded "pinched" blade front sight and top strap groove rear sight. Includes a Civil War era black leather military pattern holster with a faintly visible illegible maker marking stamped on the flap.

Class: Antique

Fine, retains 60% plus original blue finish flaking to a smooth brown patina on the balance, with scattered mild freckling and defined markings and edges in the metal. Grips are also fine with some minor nicks along the otherwise defined edges, light handling marks, and a crisp cartouche. Mechanically excellent. Holster is very good with general mild wear, aging and cracking.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Era Sharps New Model 1859 Breech Loading Rifle

Lot # 241 (Sale Order: 240 of 664)      

Exceptional Civil War Era Sharps New Model 1859 Breech Loading Percussion Rifle

The New Model 1859 military type rifles were manufactured between 1859-1862. This example features a bayonet lug and guide for use with a saber bayonet. Iron blade front and Lawrence pattern ladder rear sight mounted on the blued barrel with three barrel bands. The top of the barrel is roll-stamped "SHARPS RIFLE/MANUFG. CO/HARTFORD CONN." in three lines ahead of the rear sight and "NEW MODEL 1859" behind it. The lock plate is roll-stamped with the Sharps 1852 patent markings and the R.S. Lawrence 1859 patent markings and is fitted with the Lawrence pellet primer. The left side of the frame is stamped with the Sharps two-line patent markings. Casehardened barrel bands, receiver, hammer, trigger guard lever, lower tang, patchbox, and buttplate. Two piece walnut stock with iron patchbox. Period tack decorations on the left of the buttstock.

Class: Antique

Exceptionally fine, retains 75% original blue finish and 80% original case colors with scattered light to mild freckling, a patch of light surface corrosion visible on the left of the receiver, and sharp markings and edges in the metal overall. Wood is very fine with some scattered light to mild dents and scratches, tack decorations, a small chip behind the lock, and defined edges. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. 6-Pounder Wiard Rifle with Carriage and Caisson

Lot # 242 (Sale Order: 241 of 664)      

Rare Civil War U.S. "O'Donnell's Foundry" 6-Pounder Wiard Rifle with Carriage and Caisson

These unique rifled artillery pieces were invented by Norman Wiard and were made from cast "semi-steel" initially, and later from conventional iron to reduce costs. Wiard also designed these cannons' distinct carriages which were designed to use readily interchangeable parts. Approximately 60 Wiard rifles were manufactured c. 1861-1862. These are split between various calibers. Of these, around 24 of the 6-Pounders are known to survive, mainly at battlefields and historic sites. They were long reported as manufactured at O'Donnell's Foundry in New York City, however, more recent research has suggested they were made by other contractors. In "Revealing the Makers of the Wiard Rifle" in "Artilleryman Magazine" Vol. 36, No. 3, Capt. (ret.) Steven W. Knott of the U.S. Navy demonstrates that "The American Annual Cyclopedia" from 1861 indicates the steel was made by rolling mills in Troy, N.Y., and Trenton, N.J., and the tubes were forged by Tugnot & Dally of New York and then bored by Plass & Co. (Carpenter & Plass). Knott indicates that the details are also confirmed in a letter from March 14, 1863, from William L. Miller of Carpenter & Plass to the Ordnance Bureau, and Tugnot & Dally ran the Franklin Forge, then "one of the largest steam-powered hammer forges in the world." Relatively little is known about these scarce artillery pieces in actual combat, but the 6-pounders had an incredibly effective range of up to 7,000 yards, and some are reported to have been used by Major General Daniel Sickles' "Excelsior Brigade", and at the Battle of Stones River and Shiloh by the Ohio Light Artillery. This example has a globe type front sight, a modern elevation and drift adjustable rear sight, no visible markings, a carriage with Paulson Bros. Ordnance Corp. markings on the front of the trunnion plates, absent circular plaque on the left front of the axle that was likely a Paulson Bros. Ordnance Corp. maker plaque, and is also accompanied by a caisson with large white letters that read "US/6Pdr/WIARD".

Class: Other

Very good, retains most of the black painted finish overall extensive pitting with some areas of flaking. The carriage and caisson are both also fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

War Department Pattern Gun Norwich 1861 U.S. Rifle-Musket

Lot # 243 (Sale Order: 242 of 664)      

Extremely Rare Historic Documented War Department Pattern Gun Norwich Model 1861 U.S. Contract Percussion Rifle-Musket

This rare Norwich Model 1861 rifle-musket is identified as a War Department pattern gun, and the top breech of the barrel is bearing the corresponding marks consisting of a flaming bomb stamp above "W.D" (War Department) surrounded by an oval and "1864" in three lines, and "No 1" is painted on the rear surface of the butt, hidden beneath the buttplate. A substantial number of firms were contracted to manufacture the Model 1861 rifle-musket. Norwich Arms Company was one such manufacturer, and manufactured approximately 25,000 of these rifle-muskets between 1863-1864. An accompanying copy of an official period government correspondence letter addressed to Chief of Ordnance General G. D. Ramsay, dated May 20th, 1864, mentions this pattern gun as "Musket No. 1" as well as another "Musket No. 2" as critically inspected in detail by noted U.S. Ordnance inspector William A. Thornton, in which he mentions twelve small parts that were found to be slightly out of specification when measured with a gauge on this gun. Thornton finishes the letter by stating, "The remaining parts, comprising both muskets, have been critically inspected in detail. They are found to conform favorably with the standard gauges, to be of good materials and of passable workmanship, and I therefore recommend their acceptance as Models, with the full understanding that the errors in workmanship, herein before named, shall not exist in any of the rifle muskets to be hereafter furnished by the Norwich Arms Company pursuant to Mr. F.L. Gleason's contract of April 1st, 1864." The lot also includes letters from 1863 requesting the proper dies to be made for the War Department stamp. The lock plate is dated "1864" behind the hammer and marked with the eagle motif and "U.S./NORWICH." ahead of the hammer. The left rear of the barrel is marked with the "V/P/eagle head" proofmarks, and the top of the breech also has the standard "1864" date marking in line with the bore below the War Department marking with its separate smaller "1864" date. Rock Island Auction Company recently sold a War Department pattern gun Spencer Model 1860 with an identical stamp on its breech (Lot 190, Auction 88). The buttplate tang is marked "US" and the barrel bands are "U" marked. Fixed front sight doubling as a bayonet lug and three leaf folding rear sight, clean-out screw on the bolster, and iron tulip head ramrod. Mounted with a full straight grip stock with no inspection cartouches having ever been applied to the left stock flat due to the fact that this rifle-musket was sent directly to the Ordnance Office at the New York Arsenal for inspection as a pattern model. Sling swivel mounted on the middle barrel band and front of the trigger guard. Also includes separated pages from an original March 1864 "Harper's New Monthly Magazine" of an article titled "The Norwich Armories".

Class: Antique

Extremely fine, exhibits bright iron surfaces, most of the original blue finish on the rear sight, with sharp markings and edges overall. Stock is excellent with attractive original raised grains, some scattered light scratches and dents, some minor chipping around the front lock screw on the left flat, and defined edges. Mechanically excellent. As an identified pattern gun of the iconic U.S. contract 1861 rifle-musket that was used as a War Department sample and studied by the critical eyes of U.S. inspector William A. Thornton, this is a historically significant item worthy of any advanced U.S. martial or Civil War firearms collection!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Lindsay "Two Shot" 1863 Double Percussion Rifle

Lot # 244 (Sale Order: 243 of 664)      

Highly Desirable Civil War U.S. Lindsay "Two Shot" Model 1863 Double Percussion Rifle-Musket

Approximately 1,000 of these unique two shot rifle-muskets were manufactured by J.P. Lindsay of New York between 1863-1864. They are known to have been tested by or issued to the 5th, 16th, and 23rd Michigan and 9th New Hampshire. The 9th tested "the new double-shooting rifles" on November 8th, 1864 and found that they "...showed off their demerits to good advantage, flashed, fizzled, and failed famously; enough to secure their condemnation and a speedy exchange to the Springfield rifle." However, it appears the 16th Michigan carried the rifles for at least a short time during the Petersburg campaign. "LINDSAY/PATENT'D.OCT.9.1860" marked on top of the breech. Two oval script "ADK" (Andrew D. King) inspection cartouches stamped on the left stock flat.

Class: Antique

Excellent overall retaining armory bright metal surfaces with a few areas of very light surface freckling, attractive original raised grains and rich oil finish in the stock with a few scattered light dents and handling marks, sharp edges and crisp cartouches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War R.R. Moore Percussion Sharpshooter/ Telescope Rifle

Lot # 245 (Sale Order: 244 of 664)      

Historic Civil War Era R.R. Moore Heavy Barrel Percussion Sharpshooter Rifle with Case, Scope, and Accessories Identified as Owned by Union Sharpshooter Charles. E. Stinchfield

Old tags accompanying this rifle state: "This telescope rifle was carried with the Army of the Potomac from the second Bull Run in 1861 till after the surrender of Lee at the end of the war in 1865. It was carried by C.E. Stenchfield [sic], a sharp-shooter detached from the 8th Maine. During an engagement on the James River under Gen. Butler in 1864, the stock was shot off. It is the property of H.H. Waugh...The telescope is not in order, one glass being broken, but when in use the buttons on an enemy's clothes could be plainly seen at a distance of 1200 yards. It was present at all the battles of the Army of the Potomac, and in the Siege of Petersburg." The rifle is also accompanied by copies of documentation on Charles E. Stinchfield (1843-1908) of Co.I, 8th Regiment, Maine Infantry. Stinchfield mustered in as a private and out as a sergeant. The 8th Regiment originally mustered in for three years at Augusta, Maine, on September 7, 1861, and mustered out on January 18, 1866. They fought at Fort Pulaski, Jacksonville, Wier Bottom Church, Drury's Bluff, Cold Harbor, Petersburg, Chapins Farm, Fair Oaks, Spring Hill, Fort Gregg, Fort Baldwin, Rices Station, and Appomattox and suffered 134 killed or mortally wounded, 355 wounded, 247 dead from disease, and 35 dead in Confederate prisons. He was identified on the included muster rolls as on detached service in September and October of 1864 as serving in the sharpshooters by special order 101 of the 2nd Division XVIII Army Corps. This would have been during the Siege of Petersburg and Battle of Peebles' Farm. Around Petersburg, the 18th Corps' sharpshooters were well within range of their targets as only around 300 yards separated the entrenched lines, and accounts from the period note that soldiers were forced to keep down in the trenches as marksmen from both sides would pick off those that exposed themselves. The rifle has a heavy barrel drilled for a false muzzle and starter (included), a flat barrel rest 2 3/4 inches back from the muzzle, the front ring for the scope fit in the front sight dovetail, a screw adjustable notch rear sight, and "R.R. MOORE?CINCINNATUS/N.Y." followed by an eagle and "No 1000" on the upper left flat. The rear support for the scope is threaded into the upper tang ahead of a later added peep sight. The lock has a pheasant scene, "C. BAKER" in a banner, and scroll and double line border engraving. The rifle has a plain single trigger and German silver furniture. Rensselaer R. Moore (b.c. 1821-d. 1877) of Cincinnatus, New York, and later Cortland, New York, is a known maker of "telescope rifles" and target rifles during the Civil War. In September 1866, he advertised his move to Cortland and indicated he carried "telescope rifles, double, single, and treble barrel rifles, and shotguns." His post-war telescope rifles were similar to this one, but had "CORTLAND/N.Y." markings. It comes in a nice more modern case with a powder flask, false muzzle, starter, bullet, mold, and a few additional tools and spare nipples.

Class: Antique

Fine overall with fading original finish and a smooth brown patina on the barrel, some minor oxidation and pitting, general mild wear, some faint blue on the lock, aged patina on the German silver furniture, small chips around the lock mortise, and mild scratches and dings. The scope has been repaired and now has clear optics. Mechanically fine. The case has a cracked lid and chipped area on the interior, but it and the accessories are otherwise fine with mild age and storage related wear. Overall, a very impressive Civil War "telescope rifle" identified as owned by a confirmed Union sharpshooter!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Confederate Froelich Officer’s Sword & Accessories

Lot # 246 (Sale Order: 245 of 664)      

Civil War Confederate Froelich “CSA” Hilt Staff & Field Officer’s Sword and Scabbard with Belt, Pouch, and Book

An autographed copy of “Louis Froelich: Arms-Maker to the Confederacy” by McAden and Fonvielle is included and discusses this sword pattern on pages 50-55. 31 ½ inch long by 1 7/8 inch wide blade with wide fuller. No etching is visible. The brass hilt has “CSA” on the guard and a leather wrapped grooved wood grip. Includes an iron scabbard with brass fittings along with a leather sword belt and yellow/gold trimmed pouch with “OHS” carved into the tab.

Class: Other

Very good. The blade has mottled gray patina and mild pitting along with some small nicks at the edge. The hilt has attractive aged patina. The grip is fair with the leather mostly worn away and some bare wood showing. The scabbard is good and has mottled gray and brown patina and mild oxidation. The leather goods are fair with moderate to heavy age and storage related wear. The included book is very fine with minimal wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Confederate Bilharz, Hall & Co. Percussion Saddle Ring Carbine

Lot # 247 (Sale Order: 246 of 664)      

Rare Confederate Bilharz, Hall & Co. Percussion Saddle Ring Carbine

Originally attributed to D.C. Hodgkins & Sons of Macon, Georgia. More recent research indicates that these carbines were made by Bilharz, Hall & Co. of Pittsylvania Courthouse, Virginia, for the Confederate Government in late 1863 to early 1864 with a total number produced estimated at only somewhere between 400-700. The carbine is a 58 caliber muzzle loader with a 22 inch barrel, which was closely copied after the Springfield Model 1855 carbine. The only visible marking on the outside is a "P" marked on the left side of the barrel near the breech. Fixed iron blade front and notch rear sights. Mounted in a one piece straight grip walnut stock with iron fittings. A sling ring is mounted at the back of the trigger guard. Like a lot of Confederate arms, these were apparently handmade due to the lack of the facilities, unlike that of the North. Serial number "523" marked on the rear face of the barrel and on the underside of the breech. Information on these carbines and other pictured examples can be found on pages 17-28 of the book, "Confederate Carbines & Musketoons" by John M. Murphy and Howard Michael Madaus.

Class: Antique

Very good, exhibiting genuine Confederate use. The barrel has a gray brown patina with heavy flash pitting from the rear sight to the tang and moderate surface rust on the balance of the barrel. The trigger guard and buttplate have exposed rust and pitting. Artificially aged modern professionally made replacement ramrod retainer. Stock is good as lightly sanded and re-oiled with scattered light scratches and dings, a chip and some wear to the right of the barrel tang, a crack behind the lock, a crack ahead of the rear lock screw, what appears to be a 1/2-inch diameter knot hole in the right of the buttstock, and moderate handling wear. Mechanically fine. This is a solid representative example of a very rare Confederate Bilharz, Hall and Co. carbine that would be a stand out piece in any Confederate or Civil War small arms collection. This example, proudly wearing its scars from hard period use, exemplifies what most Confederate collectors desire!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Documented U.S. 1840 Civil War Confederate Realteration Musket

Lot # 248 (Sale Order: 247 of 664)      

Rare Documented U.S. Model 1840 Civil War Confederate Realteration Percussion Musket with Bayonet

This exact musket is pictured and described on page 42 of George D. Moller's book "American Military Shoulder Arms Volume III" in which it states, "Approximately 200 Nippes contract Maynard lock muskets located at the federal arsenal near New Orleans were among the arms confiscated by the Confederate government from the federal arsenal during the Civil War. They were realtered to the common percussion configuration by the P. Bouron & Sons gun store in New Orleans." Blade sight on the front barrel band, smooth bore, "MILL/CREEK/PA/1841" and "D. NIPPES/US" marked lock, "U.S./JH/P" marked breech, "1843" dated barrel tang, and crisp oval script "EB" and "W.A.T" inspection cartouches stamped on the left stock flat. Small "GDM" (George D. Moller) collection initials stamped on the bottom of the buttstock. Includes a "U.S." marked socket bayonet and brown leather sling.

Class: Antique

Very good plus with an attractive fresh untouched aged patina, scattered mild freckling, and sharp markings and edges in the metal overall. Stock is fine with defined edges, scattered mild dents and scratches, a few small chips, a crack ahead of the rear lock screw, and crisp cartouches. Mechanically excellent. Bayonet is fine. This rare Confederate documented U.S. Model 1840 musket would fit well in any Civil War arms collection!

Provenance: The George D. Moller Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

British Flintlock "Nock" Volley Gun

Lot # 249 (Sale Order: 248 of 664)      

Rare British Flintlock "Nock" Volley Gun

The Nock Volley Gun was actually designed by James Wilson in 1779 during the American Revolution and was put into production by Henry Nock under contract with the Royal Navy. It could be used similar to a blunderbuss but with greater range as well as greater recoil. They were ultimately pulled from service in 1804/1805 as they proved to impractical and dangerous to both the shooter and his vessel. Some were also produced for the private market for hunting. This unusual volley gun has no identifying maker's marks but was most likely made by Henry Nock c. 1780 when he was producing James Wilson's volley guns for the British Royal Navy as it has the earlier style lock. It was either made for or updated for private sale given the checkered wrist, lack of government markings, and the replacement of the side plate with two lock screw washers. The smoothbore barrels have Ordnance "crown/cross scepter" proofs. "H-NOCK" was likely originally signed on the right barrel towards the breech given other examples we have examined. The lock has a distinctive frizzen spring that folds between the priming pan and the cock (Second Models had the spring under the pan) , "LONDON" stamped below, and a back action mechanism. The trigger guard and buttplate are martial pattern. The walnut stock has the martial pattern shape but with a checkered wrist.

Class: Antique

Very good with mottled gray and brown patina on the barrels and lock along with extensive mild pitting, distinct "LONDON" marking, some faint proofs, aged patina on the furniture, and mild overall wear. The stock has some small repairs, crisp checkering, and moderate scratches and dings. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

British Pattern 1738 Land Service Flintlock Pistol

Lot # 250 (Sale Order: 249 of 664)      

1745 Dated Farmer British Pattern 1738 Land Service Flintlock Pistol

James Farmer was a Birmingham gunmaker and Ordnance, East India Company, and Company of Merchants contractor and later partnered with Samuel Galton. This pistol features a rounded "banana" profile lock with the Georgian cipher at the center, "FARMER/1745" vertically at the tail, double line borders, and a "crown/broad arrow" mark below the bridled priming pan. The smoothbore barrel has "IF" on the left and Ordnance proofs on top. The furniture is brass. The wood ramrod also has a brass tip. The stock has the swelled profile at the entry point, shaped tear drop flats, and a raised plateau around the barrel tang.

Class: Antique

Very good with mottled gray and brown patina and mild pitting on the lock and barrel, attractive aged patina on the brass, and mostly distinct markings. The refinished stock is good and has some cracks and small chips and general light scratches and dings. Mechanically fine.

Provenance: The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

British Pattern 1760/78 Royal Forester's Light Dragoon Flintlock

Lot # 251 (Sale Order: 250 of 664)      

Very Scarce British Pattern 1760/78 Royal Forester's Light Dragoon Flintlock Pistol

This pistol is the same pattern shown on pages 45 and 88 of "Pattern Dates for British Ordnance Small Arms, 1718-1783" by De Witt Bailey. The distinctive side plate is secured by the two lock screws and a third screw ahead of the stepped tail. The Royal Foresters; carbines had similar side plates, and another distinguishing feature is the spade shaped carving at the barrel tang. The smoothbore barrel has the Ordnance/King's proofmarks on top and a "12" marking by the vent. The flat lock has beveled edges, double line borders, a "crown/broad arrow" marked below the bridled priming pan, Georgian cipher at the center, and "TOWER" vertically. The full-length stock has a plain forend tip and brass furniture, including a vacant escutcheon. The single ramrod pipe is flared, and faint marks are marked in the ramrod channel. The rod has a brass tip.

Class: Antique

Very good with silver-gray and light brown patina along with some light oxidation and pitting on the lock and barrel, attractive aged patina on the furniture, a crack at the trigger guard screw, and mild overall wear. The stock is good with some thin cracks, a chip at the barrel tang, small chip by the trigger guard screw, and mild scratches and dings. Mechanically fine. This is a very attractive example of a very scarce model of British military pattern flintlock pistols!

Provenance: The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 10 of 27

1.178.0.872.686122d.9.95