Premier Firearms Auction - Day 1

Premier Firearms Auction - Day 1

Friday, May 17, 2024  |  9:00 AM Central
Auction closed.
Premier Firearms Auction - Day 1

Premier Firearms Auction - Day 1

Friday, May 17, 2024  |  9:00 AM Central
Auction closed.
Internet Premium: 27%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 9 of 27

Civil War Era Colt Model 1855 Military Musket

Lot # 202 (Sale Order: 201 of 664)      

Excellent and Rare, Exhibition Colt Model 1855 Revolving Military Pattern Rifle-Musket

This is an excellent example of a Colt Model 1855 military pattern rifle-musket, manufactured for factory exhibition at the 1876 Philadelphia Centennial and later Schuyler, Hartley & Graham Display board. The stock and forearm of this example are attractive highly figured factory hand picked select grain varnished American walnut, differing from the standard military muskets. Reportedly, 4,825 of the Colt Model 1855 rifles were manufactured in .56 caliber with 37 1/2 inch barrels out of the 9,310 military rifles manufactured in various configurations between 1856-1864 (reference pages 182-183 of Wilson's book). The majority of these rifles were purchased during the Civil War, although this excellent example appears to be an exception. Many, like this example, were finished with the same "National Armory Bright" finish found on regulation rifle muskets. Of very interesting note, page 312 of R.L. Wilson's "The Book of Colt Firearms" shows a photograph of the Hartley & Graham display board of 1877, containing an identical example of a Model 1855 musket with serial number 4161, one serial number before this gun bearing serial 4162, and a Model 1855 full stock sporting rifle with serial number 4163, one serial number after this gun. The aforementioned guns are also photographed on pages 193 and 196 of the book. This example has old red painted inventory number "119" located on the rear of the buttplate. Its high state of condition along with its factory hand picked select grain varnished walnut stocks strongly suggest this example was also used for exhibition purposes, with the guns one serial number above and below it known to have been from the Hartley & Graham display board. As mentioned on page 313 of Wilson's book, Schuyler, Hartley and Graham had multi-gun permanent displays in their showrooms in New York City, as well as a number of other trusted Colt dealers, so it is likely this example may have been in one of these displays, or possibly even in a Colt factory display. Page 314 shows another Schuyler, Hartley and Graham display along with a different Cooper and Pond display, both displays containing Colt 1855 muskets, at one of the benefit fairs held in New York during the Civil War. This military type revolving musket is finished "National Armory Bright" with niter blue finished rear sight along with the cylinder nipples and some of the small screws. The barrel has 7-groove rifling, a block front sight that serves as a lug for a socket bayonet, and three-leaf folding rear sight graduated for 100, 300 and 600 yards. A steel cleaning rod is mounted below the forearm (absent tip). Factory sling swivels are located on the middle barrel band and trigger guard tang. The forearm has a brass tip. "COL. COLT HARTFORD CT. U.S.A." is roll-stamped in the top-strap sight groove. The five shot fluted cylinder is roll-stamped "PATENTED SEPT. 10th 1850" in one flute. "COLT'S PATENT/Nov. 24th 1857" is roll-stamped on the left side of the frame. The iron buttplate has a sliding trap door. The matching serial number "4162" is stamped on the bottom of the frame, bottom of the barrel, rear of the cylinder, cylinder pin, trigger guard tang and on the buttplate heel, with the number also correctly handwritten in black ink inside the forearm along with the handwritten word "varnish".

Class: Antique

Excellent, with highly attractive original "National Armory Bright" finish overall, some scattered patches of minor surface freckling, 50% plus original niter blue finish on the small parts, zero evidence of firing use around the cylinder nipples, and absolutely sharp markings and edges in the iron overall. The highly figured wood is also excellent, with attractive grains, some scattered minor surface flaking of the outer varnish coat concentrated on the forearm, a few light scratches and storage marks, and distinct edges and fitment in the wood overall. Absent ramrod tip. Mechanically excellent. This highly attractive Civil War era Colt Model 1855 Military Musket, likely used for factory or dealer display, would be extremely difficult to improve upon and would make an excellent addition to any advanced Colt collection!

Provenance: The Legendary Bobby Smith; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 32,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1851 Navy Percussion Revolver

Lot # 203 (Sale Order: 202 of 664)      

Exceptional Cased Colt Model 1851 Navy Percussion Revolver with Herb Glass Letter

This extraordinarily high condition Colt Model 1851 Navy revolver dates to 1853 and features a brass cone front sight, "-ADDRESS SAML COLT NEW-YORK CITY-" on top of the barrel, "3" on the left side of the barrel lug and on the cylinder below the serial number, the iconic Naval Battle of Campeche cylinder scene, small "COLTS/PATENT" marking on the frame, "K" and "G" stamped on the left side of the trigger guard, and matching serial numbers visible on the cylinder, loading lever, barrel, frame, trigger guard, and back strap. It comes in a fitted case with Eley Bros. cap tin with orange label, cartridge pack, early Colt Navy flask with slanted charger, L-shaped combination wrench and screwdriver, brass ball and bullet mold with "COLT'S/PATENT" on the iron sprue cutter, and several lead balls. The included 1984 dated Herb Glass letter extols this revolver and accessories' exceptional "unfired, unused condition" overall and notes that "This lovely outfit would be most difficult to improve upon. I am sure you enjoy owning it."

Class: Antique

Exceptionally fine. The barrel retains 90% plus bright original high polish blue while the cylinder retains 60% plus. As noted in the letter, "This gun has no signs of any wear or use whatsoever. Areas of missing blue are faded, not worn, to a fine patina. It is about mint in all other respects (bore, markings, mechanics, etc.)" 85% plus of the somewhat muted original case colors remain, and the grip frame retains 40% original silver plating and displays some dark patina. Aside from minor wear at the toe and a scratch on the right, the grip is excellent and retains essentially all of the bright original piano varnish. Mechanically excellent. The case is fine and has light storage wear, a couple of damaged dividers, and minor glued repairs corners and on the interior trim, and the other accessories are very fine and have only minor age and storage related wear.

Provenance: Herb Glass Jr.; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Engraved Colt Model 1861 Navy Percussion Revolver

Lot # 204 (Sale Order: 203 of 664)      

Historic Factory Engraved Civil War Era Colt Model 1861 Navy Percussion Revolver with Presentation Inscription from F.A. Andrews to Lieutenant F.H. Wright

The Colt Model 1861 Navy is certainly among the most attractive and desirable of Colt's percussion revolvers from the Civil War. They are considerably rarer than many of the other major models with only approximately 38,843 manufactured. The model combines the popular .36 caliber of the Model 1851 Navy, one of the most popular revolvers of the 19th century, with the sleeker round barrel and improved loading lever design introduced on the Colt Model 1860 Army. This historic example was manufactured in 1863 right during the middle of the American Civil War and was factory engraved, fitted with a special order grip, and presentation inscribed to a Union soldier from Ohio. This revolver is one of the distinctive revolvers attributed as "Wolf engraved" back before we had a better understanding of who the factory engravers working for Colt were. We know now that this revolver was more likely engraved by Georg H. Sterzing (c. 1800-1871) who was one of the main engravers working for Colt during the Civil War. The engraving is the classic Continental European style popularized by Sterzing, Gustave Young, and other German immigrant engravers who arrived in the 1850s following the revolutions of 1848. The patterns mainly consist of flowing scrollwork with floral accents and beaded backgrounds, and the hammer features the wolf or dog head motif that was essentially standard on factory engraved Colt percussion revolvers in the period. The revolver otherwise has standard markings and features, including all matching visible serial numbers, double struck "COLTS/PATENT" frame marking, and the factory "IE" marking denoting the engraving and grip is marked above or below the serial number along the bottom of the revolver. The back strap features the inscription "F.A. Andrews to Lieut F.H. Wright." Lieutenant Francis Hanmer Wright Jr. (1834-1915) of Tallmadge, Summit County, Ohio, enlisted in the Ohio National Guard in the winter of 1862-1863 during the Civil War and was mustered into federal service on May 11, 1864, in Company D of the 164th Regiment, Ohio Volunteer Infantry, and was honorably discharged at Camp Cleveland in Ohio on August 27, 1864. The 164th was primarily assigned garrison duty in the forts outside of Washington, D.C., to protect the capital. These fresh recruits freed up more experienced troops for the Union's push towards the Confederate capital in Richmond, Virginia. After returning home, he returned to farming. He was also an active Republican, member and clerk of the local high school board, and participated in the Grand Army of the Republic. Copies of service records and biographical information on Wright are included, including a letter from Norm Flayderman to Clare F. Short providing what he found on Wright. The identity of the presenter is less clear. No military rank is given suggesting the man was a civilian. There was an "F.A. Andrews" in Cleveland in the period. He may have been a local businessman or friend of Wright's.

Class: Antique

Very good with traces of original silver remaining in the protected areas of the grip frame and otherwise artificially aged brown patina overall. The engraving and markings mostly remain crisp aside from the faded cylinder scene. The grip is very fine and has attractive natural grain and aged tones along with a slight flake on the lower right edge and slight age stress lines. Mechanically fine.

Provenance: Lieutenant Francis H. Wright; The Clare F. Short Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Engraved Colt Model 1849 Pocket Percussion Revolver

Lot # 205 (Sale Order: 204 of 664)      

Factory Engraved Colt Model 1849 Pocket Percussion Revolver with Norm Flayderman Letter

The included July 8, 1971, letter from legendary collector and dealer Norm Flayderman notes that this revolver was believed to be the only factory engraved Model 1849 Pocket with a two-line Hartford barrel address that they had cataloged, and we have only cataloged a few ourselves, mainly in the 180700 range. The revolver's rarity is furthered by the dovetailed blade front sight, the quality of the engraving, silver finish, and special grip. The revolver was manufactured in 1860 on the eve of the American Civil War. The engraving consists primarily of elaborate Germanic floral scroll engraving patterns with beaded backgrounds, a snake head motif on the left side of the barrel, shell accents, "COLTS/PATENT" hand engraved on the left side of the frame, the dog/wolf head motif on the hammer, and a blank panel on the back strap for the option of adding an inscription. This style of engraving was popularized by Gustave Young and other German immigrant engravers working for Colt in Hartford in the 1850s and 1860s. The visible serial numbers all match, and the factory "dot" marking designating engraving or special finishing is marked above or below the matching serial numbers on the barrel, frame, trigger guard, and back strap. The barrel is marked with "-ADDRESS SAML COLT/ HARTFORD CT.-" on top and "2" on the bottom left. The left side of the trigger guard has a "3."

Class: Antique

Very good with crisp engraving and markings, distinct cylinder scene, 60% original silver on the grip frame and traces on the other components mainly on the bottom of the barrel and top of the loading lever, mottled gray patina on the balance of the iron, and aged patina on the balance of the brass. The grip is very fine and has some shrinkage from age, minor flakes at the top left, minor handling wear, and attractive natural aged patina and grain. Mechanically fine.

Provenance: Norm Flayderman & Co. Inc. Catalog 88 Item 1242; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to F****6! to YOU!

Placing your bid. please wait...

Engraved Collier 2nd Model Percussion Conversion Revolver

Lot # 206 (Sale Order: 205 of 664)      

Rare Documented Engraved Collier Second Model Percussion Conversion Revolver

The Collier revolving cylinder firearms are very rare and historically significant firearms. Less than 250 total are estimated to have been manufactured across four variations, and they are rarely available. The design was actually first patented in the U.S. by Artemus Wheeler of Concord, Massachusetts, on June 10, 1818. Elisha Haydon Collier patented on an improvement of the design in the United Kingdom on November 24 of the same year, and Cornelius Coolidge patented Collier's improved design in France on August 5, 1819. "Collier & Co., Gunmakers" of London in 1818-1827 sold variations of the design in the form of pistols, rifles, carbines and shotguns. The design allows for several quick shots, especially considering that the era was dominated by single shot muzzleloading firearms. After experimenting with clockwork-assisted rotation in the First Model, these Second Model Colliers have manually rotated cylinders and automatic primers. On these Second Models, the lock is brought to half-cock, and then the cylinder is pulled rearward and rotated by hand. When the cylinder is in place, a rebate at the front of the cylinder envelopes a shoulder on the barrel at the breech creating a tight seal. It remains unclear whether Collier & Co. manufactured any of these firearms aside from perhaps the prototypes, and it appears they likely had them manufactured by other London gunmakers. Per Howard L. Blackmore in "Gunmakers of London, 1350-1850," the guns were manufactured by John Evans (John Evans & Son) in London, and then the patent was taken over by William Mills around 1830, and some revolvers were sold by a partnership between Mills and Collier. Blackmore also notes William Elliot Lee of London as patenting the design in Paris in 1823, and he may have been an agent or manufacturer for Collier as well. Other gunmakers, such as Samuel Nock, are believed to have been involved in manufacturing at least some of the finished guns or components. This historically significant revolver is Collier number 48 from c. 1820 and was originally a flintlock revolver but was then period converted to percussion. As such, it is an important link between the 2nd Model Collier flintlock revolvers and the 3rd Model Collier percussion revolvers and also an important predecessor to Samuel Colt's Paterson revolvers. Colt is believed to have seen Collier revolvers on his 1830-31 voyage to England and India as a sailor on the Corvo and to have been influenced by the design. The Collier patents and testimony from Collier were part of the 1851 court case brought by Colt against the Massachusetts Arms Co. because Colt's patent was considered an improvement on the Collier and Wheeler patents. This revolver is featured in figure 13 in the American Society of Arms Collectors article "Collier and His Revolvers" by Clay Bedford where it is listed as "Second Model No. 48, Converted to Percussion." Bedford also writes, "Figure 13 shows a second model pistol (Collier #48) converted to percussion by removing the shroud and screwing nipples into the cylinder touch holes, then replacing the flint with a percussion hammer and removing the priming magazine. The number is marked on spindle, cylinder plate, and upper edge of lock plate, as well as on the barrel and lock plate." Conversions of the 2nd Model Colliers are also discussed in Ben Nicholson's American Society of Arms Collectors article "The 'Enigmas' of Clay Bedford's Collier Collection" and in his upcoming book "Clockwork Basilisk: The Early Revolvers of Artemas Wheeler and Elisha Collier."The revolver's octagonal Damascus barrel measures approximately 44 bore at the muzzle (around .47 caliber) and is smoothbore and has a solid, concave rib with a post front sight, "E.H. Collier 48 London" signed on top along with scroll and martial engraving, a notch rear sight on the top strap section of the rib at the breech, a groove cut into the bottom of the top strap to allow the percussion nipples to rotate past, a lower rib under the barrel with a notch at the front and a single ferrule to secure the ramrod which has a worm on one end and a metal rammer on the other, and a checkered section on the rear section of the lower rib. The frame is blued and has martial and scroll engraving. The casehardened back action lock is signed "E.H. Collier/48 PATENT" and has bordered, martial, and scroll engraving. The percussion hammer has scroll engraving. The blued, squareback trigger guard has martial and border engraving. The five-shot cylinder has grooved borders and concave ribs. The mouth of each chamber has the classic 2nd Model recess that allows the chamber to lock in place over the breech end of the barrel, and the cylinder is held forward under spring pressure. The grip has a silver eight pointed star inl
more...

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Navy Contract Colt Model 1851 Navy Percussion Revolver

Lot # 207 (Sale Order: 206 of 664)      

Very Scarce U.S. Navy Contract Colt Model 1851 Navy Percussion Revolver

Reportedly 2,640 Model 1851 Navy revolvers were purchased by the U.S. Navy between June 1856 through September 1859, of the approximately 215,000 total Model 1851 Navy revolvers manufactured in Hartford. This "Navy-Navy" revolver was manufactured in 1856 and has "U.S.N." above "J.L.H." stamped on the butt of the back strap indicating it was inspected by Commander James L. Henderson, active at Norfolk Navy Yard between June 1857 to April 1861. Many of these were later converted for use with metallic cartridges by the Navy, with this example still remaining in its percussion configuration. Features the distinctive iron grip frame, a post front sight, "-ADDRESS SAML COLT HARTFORD CT.-" on top of the barrel, the Naval Battle of Campeche cylinder roll-scene, "COLTS/PATENT/U.S." on the left of the frame, and all matching visible serial numbers including properly handwritten in black ink inside the grip mortise.

Class: Antique

Very good with smooth gray and brown patina overall, with traces of original case colors, a few patches of minor pitting, and defined cylinder scene, edges and markings in the iron overall. Grip is very fine with some light handling marks and nicks, and defined edges. Mechanically excellent.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

USN Colt Model 1851 Navy Cartridge Conversion Revolver

Lot # 208 (Sale Order: 207 of 664)      

U.S. Navy Colt Model 1851 Navy Cartridge Conversion Revolver

Manufactured between 1873-1880. Brass bead front and hammer notch rear sights, with the one-line New York address on the barrel, spring-loaded ejector on the right side. The frame is double stamped, with "COLTS/PATENT/U.S." covered with a 1871/1872 "Two July" patent marking, and the butt is stamped "U*S*N". The hammer and recoil shield are configured for center fire, with a smooth one-piece walnut grip. Barrel, frame and cylinder number 59829. Back strap and trigger guard number 62347.

Class: Antique

Very good as assembled, with 20% of the factory refurbished blue finish, showing a number of dings on and around the wedge and ejector, mild spotting overall, and pitting around the breech and muzzle. The frame shows 30% of the original case colors, with the remainder a mixed gray. Includes some mixed/force-matched components. Grip is very good as revarnished, with some dents and scuffs. Mechanically excellent.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Navy Contract Colt Model 1861 Navy Revolver

Lot # 209 (Sale Order: 208 of 664)      

Civil War U.S. Navy Contract Colt Model 1861 Navy Percussion Revolver

This revolver was sold to the United States Navy Department and shipped to the Commanding Officer at the U.S. Navy Yard in Philadelphia, Pennsylvania, on January 17, 1862, in a shipment of 200 1861 Navy revolvers. The revolver has traces of the standard one line New York barrel address, "COLTS / PATENT" on the left side of the frame, and "36 CAL" on the left side of the trigger guard. The cylinder is roll engraved with the Texas Navy scene. Matching serial number are on the cylinder, barrel, frame, trigger guard, and back strap, and the partial serial number "495" is on the wedge. The wedge screw is missing. Only several hundred of these revolvers were sold to the Navy during the Civil War.

Class: Antique

Very good. The revolver has a smooth dark patina with even light spotting primarily on the barrel and some pin prick pitting primarily on the barrel and cylinder. The cylinder scene is faint. The brass has a fine aged patina. The re-oiled grip is also very good with the exception of a chipped toe and some minor dings and scratches. Mechanically functional but needs some work as it does not properly hold half cock.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Navy Richards-Mason Conversion Colt 1861 Navy Revolver

Lot # 210 (Sale Order: 209 of 664)      

U.S. Navy Richards-Mason Cartridge Conversion Colt Model 1861 Navy Revolver

This revolver was originally manufactured in 1861 and is one of just a few hundred '61 Navies purchased for the U.S. Navy during the Civil War, subsequently converted for use with metallic cartridges for the navy in the mid-1870s. These were used through the late 19th century before being replaced by the Colt Model 1889 Navy and New Navy revolvers. Features a German silver blade front sight, New York barrel address, "R.W.M." and an anchor on the bottom of the barrel at the breech, "PAT. JULY. 25, 1871./PAT. JULY. 2, 1872." stamped on the left of the frame on top of the original "COLT/PATENT" marking, "36 CAL" on the left of the trigger guard, "89529/557" marked on the cylinder, "1170" on the loading gate, "6557" on the barrel, frame, and grip straps.

Class: Antique

Very good plus with 25% of the factory refurbished case colors visible on the frame, attractive golden aged patina on the grip straps, 20% blue finish on the barrel and ejector housing, smooth gray and brown patina on the balance, generally mild overall wear as expected for a U.S. Navy sidearm, with a defined cylinder scene. Grip is also very good with numerous scattered dings and handling marks. Mechanically excellent. Only a few hundred of these were purchased for the U.S. Navy during the American Civil War, and they remained in service for many years, making them difficult to find in this condition.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1860 Army Percussion Revolver with Fluted Cylinder

Lot # 211 (Sale Order: 210 of 664)      

Exceptional Early Production Three Digit Serial Number Colt Model 1860 Army Percussion Revolver with Desirable Fluted Cylinder and 7 1/2 Inch Barrel

This revolver was manufactured on the eve of the Civil War during the tense presidential election year of 1860. Tensions between the northern and southern states had been building for decades but accelerated that year over the issue of slavery and its expansion into territories in the West during the election. When Republican Abraham Lincoln emerged the victor with nearly 40% of the popular vote and 180 of the electors despite not even being on the ticket in ten southern states, secession movements accelerated, and South Carolina became the first of the southern states to secede, doing so on December 2, 1860. Additional states in the South soon followed prior to Lincoln taking office setting the stage for armed conflict. During this tense period, Samuel Colt continued to market his arms to both the federal government and the South. Chief among the arms he marketed was his "New Model Army" revolver introduced in 1860, and many of the revolvers manufactured that year and in early 1861 were shipped south of the Mason-Dixon Line, even after the bombardment of Fort Sumter.The potential Confederate connections along with these revolvers being a rare and early variation of an important Colt model have made these fluted cylinder Model 1860 Army revolvers highly sought after by collectors, especially rare examples with considerable finish like this very early example. Charles Pate in his book "The Colt Model 1860 Army Revolver" estimates that between 5,000 and 6,300 fluted cylinders were originally produced, and some of these cylinders were changed by the factory to the standard non-fluted cylinders if they were returned to the factory which has limited the number that have survived. By his estimates, the 7 1/2 inch barrel on this revolver is actually rarer than the fluted cylinder as he estimated that only 2,800 Model 1860 Army revolvers had this barrel length. Regardless of the exact numbers, only a very small portion of the 200,500 revolvers manufactured between 1860 and 1873 were in this configuration.The revolver has the distinctive blued, six-shot, fluted cylinder that defines this desirable variation. The cylinder is marked the serial number and "PATENTED SEPT. 10th 1850" in one of flute in the same location which is rather unusual. The cylinder has the early straight bored chambers. Colt later introduced a taper to the chamber at the breech end after report of failures do to the thinness of the barrel wall at the cylinder stops on these early revolvers. The rare early production barrel is 7 1/2 inches in length and has a German silver blade front sight, "-ADDRESS SAML COLT HARTFORD CT.-" roll-stamped on top, a casehardened "creeping" loading lever mounted underneath, "2" no the left side of the barrel lug, and the matching serial number "539" on the bottom. The brilliantly color casehardened "four screw" frame has the matching serial number "539" on the bottom at the front, "COLTS/PATENT" stamped on the left side of the frame, slightly projecting "fourth" screws, flush hammer screw head, shoulder stock cuts on the recoil shield, and a capping groove on the right. The hammer is also color casehardened and features borderless knurling. The silver plated brass front strap has the matching serial number "539" at the front of the trigger guard along with "S" and "G" on the left side, and the iron back strap has "539" at the toe and a slot at the heel for mounting a shoulder stock. The wedge and arbor are also numbered "538." The "piano" varnished grip is "Army sized" rather than the smaller "Navy" sized grip seen on some early examples.

Class: Antique

Very fine with 95% plus original silver plating on the trigger guard and front strap, 60% plus original case colors, 50% original blue finish on the barrel, strong original blue in the cylinder flutes, gray and brown patina on the balance of the iron, some light oxidation and pitting, and general mild overall wear. The grip is also very fine and retains 80% plus of the original varnish and has some minor edge wear, light scratches and dings, and small dents. The action occasionally locks up, but it otherwise mechanically functions. This is both an exceptional and scarce Colt Model 1860 Army with three-digit serial number and desirable fluted cylinder and 7 1/2 inch barrel. Most of these early revolvers were used during the Civil War making them very difficult to find in this level of condition.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 14,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Era Colt Model 1851 Navy Percussion Revolver

Lot # 212 (Sale Order: 211 of 664)      

Attractive Civil War Era Colt Model 1851 Navy Percussion Revolver with Special Order Grip

This revolver was manufactured in 1862 and has the "I" suffix stamped above/below the main serial numbers used to indicate special order grips like the one found on this revolver. The grip also has the matching partial serial number properly handwritten in black ink in the back strap mortise. It may have been ordered by or for a Union Army officer as the Model 1851 Navy was the standard sidearm of the period. It has a brass cone front sight, "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" along the top of the barrel, the standard Naval Battle of Campeche scene and patent markings, and all matching serial numbers.

Class: Antique

Very fine overall. The revolver appears to have seen very little if any use and has all of the cylinder safety pins, 85% plus bright original high polish blue finish remains on the barrel, distinct battle scene and blend of gray and brown patina on the cylinder, 80% plus of the vibrant original case colors, traces of original silver plating on the grip frame which displays aged patina on the exposed brass, and minor marks and scratches. The excellent original grip has very attractive natural tones and grain, a minor age crack near the heel, and minor handling and storage marks. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1849 Pocket Percussion Revolver

Lot # 213 (Sale Order: 212 of 664)      

Exceptional Cased Colt Model 1849 Pocket Percussion Revolver

The Model 1849 Pocket was the most popular Colt revolver of the 19th century with over 325,000 manufactured by the time production ended in 1873, but they are very hard to come by in high condition like this example because they were generally actually carried thanks to their convenient size. This revolver dates to 1866 and remains in spectacular condition. It has a cone front sight, the one-line New York barrel address, five-shot cylinder with the stagecoach scene, standard patent markings, "P" and "31 CAL" on the left side of the trigger guard, and matching serial numbers visible on the cylinder, barrel, frame, trigger guard, and back strap. The case contains an eagle pattern pocket flask, blue ball/bullet mold, cap tin, balls, and key.

Class: Antique

Exceptionally fine with 80% plus original blue, 90% original case colors, 60% original silver plating with fading on the back strap from contact with the case, and minor handling and storage wear. The grip is excellent and has very slight handling and storage marks and nearly all of the original varnish. Mechanically excellent. The case and accessories are all fine with minor storage wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1855 "Root" Pocket Percussion Revolver with Case

Lot # 214 (Sale Order: 213 of 664)      

Fine Colt Model 1855 "Root" Pocket Percussion Revolver with Case with Charles Folsom Sportsmen's Warehouse Label and Herb Glass Letter

Samuel Colt's "New Model Revolving Pocket Pistol" or "Model 1855 Pocket" was nicknamed by collectors as the "Root Revolver" after factory foreman and superintendent Elisha K. Root. They are the only Colt percussion revolvers to feature a solid frame and spur trigger. They certainly rank among the most attractive of all American percussion pocket pistols. Nonetheless, production was limited to only around 30,000 in the diminutive .28 caliber in 1855-1861 and another 14,000 in .31 caliber in 1860-1870 compared to over 300,000 of the larger Model 1849 Pocket revolvers. Given their attractive and distinctive style, multiple variations, and rarity, these revolvers are highly sought after by collectors today. This "Model 2" variant was manufactured in 1856 with an octagon barrel with cone front sight and the pointing hand motif ahead of the patent and Hartford address, cylinder with the cabin and Indian scene, varnished one-piece grip, and matching serial numbers on the barrel, butt, and cylinder. The wood case contains a Great Seal of the U.S. themed pocket powder flask, brass double cavity bullet mold with "COLT'S/PATENT" marked sprue cutter, Goldmark cap tin, lead balls and bullets, and a rare trade label reading: "SPORTMEN'S DEPOT/CHARLES FOLSOM/Importer of Guns and Sporting Apparatus,/AND/GUN MATERIALS of every description,/203 BROADWAY/NEW-YORK." An included July 7, 1976, letter from Herb Glass Sr. indicates the revolver was sold by his son to a collector a couple of days earlier and notes that it "is completely original and in very fine condition...The small size of the Root model makes cased sets attractive, and yours is especially so with its fine condition and original dealer's business card inside the lid. I can assure you that Colts in this condition are an excellent investment. I hope you enjoy it."

Class: Antique

Fine with 60% plus original blue finish, 30% original case colors, some minor oxidation, and mostly minor age and storage related wear. The grip is also fine and retains the vast majority of the original finish and has minor scratches and edge wear. Mechanically fine. The refinished case and accessories are very good with minor age and storage related wear and some glued repairs on the case dividers.

Provenance: Herb Glass Jr.; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Gustave Young Factory Engraved Colt Model 1849 Pocket Revolver

Lot # 215 (Sale Order: 214 of 664)      

Gustave Young Factory Engraved Colt Model 1849 Pocket Revolver

This factory engraved Model 1849 Pocket was manufactured in 1854. Gustave Young's shop were the primary engravers for Colt from 1852 until the mid to late 1860s. The intricate scroll engraving, hand engraved "COLTS/PATENT" marking on the frame and hand engraved "SAML COLT" "presentation style" marking on the barrel match other Young engraved Colt revolvers from the 1850s. For example, "The Book of Colt Engraving" by R. L. Wilson includes multiple revolvers with similar dog head designs worked into the scroll patterns. The dog head on this revolver appears on the left side of the frame. The hammer has Young's classic wolf/hound head motif. The cylinder has the standard stagecoach scene. Matching full or partial serial numbers appear on the barrel, frame, trigger guard, back strap, loading lever, cylinder, wedge, and arbor pin. A dot, which indicated special finishing by the factory, is stamped below or above the serial numbers to the main components (barrel, frame, trigger guard, and back strap).

Class: Antique

Very good plus. The grip straps retain most of the original silver plating and traces of original blue finish remain no the barrel, otherwise the untouched original revolver has a smooth gray patina associated with a well traveled sidearm proving that not all art hangs on the wall. Much of the cylinder scene remains. The engraving is crisp. The grip is fine with minor handling marks and much of the original varnish remaining. Mechanically needs work as cylinder does not always rotate properly when action is cycled.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

"Wells Fargo Model" Colt 1849 Pocket Revolver

Lot # 216 (Sale Order: 215 of 664)      

Exceptional and Highly Desirable "Wells Fargo Model" Colt Model 1849 Pocket Percussion Revolver

Manufactured in 1858. This is a scarce example of a Colt Model 1849 Pocket Model variation with a three inch barrel without provisions for a loading lever, a solid lug without loading slots, and otherwise standard Model 1849 markings and features including matching visible serial numbers on the barrel, frame, trigger guard, butt, wedge, cylinder and cylinder pin.

Class: Antique

Exceptionally fine, retains 60% original blue finish on the barrel with smooth brown patina on the balance, smooth gray patina on the cylinder with a distinct scene, 75% vivid original case colors, and 70% original silver plated finish on the brass. Grip is very fine with some mild edge wear, some scattered light scratches, and most of the original varnish finish. The hammer requires manual assistance in order to release with the trigger. This desirable "Wells Fargo Model" Colt Model 1849 Pocket revolver is in a high level of condition when compared with the surviving examples today.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1855 Root Pocket Revolver with Accessories

Lot # 217 (Sale Order: 216 of 664)      

Cased Colt Model 1855 Root Pocket Revolver with Accessories

This revolver was manufactured in 1856. The top barrel flat is marked "COLT'S PT./1855" followed by "ADDRESS COL. COLT/HARTFORD CT U.S.A." with the pointing finger and Maltese crosses. The cylinder is roll engraved with the Cabin and Indian Fight scene and marked "COLT'S PATENT/No 13584" (faint). All blue finish with casehardened hammer, loading lever and fire blue trigger. Pin front and frame notch rear sights, and fitted with a smooth one piece walnut grip. The matching serial number is stamped on the butt, barrel and cylinder. The revolver is in a wooden case with velvet lining, which also holds an eagle powder flask, an Eley cap tin, a Colt's patent marked two cavity bullet mold with iron sprue cutter, and a key.

Class: Antique

Very fine. The revolver retains 70% original blue finish with a smooth gray patina on the balance. Limited light pitting is present with most of the cylinder scene remaining. Traces of original case colors remain on the loading lever and hammer. The grip is also very fine with two small chips missing from the front near the bottom and a few mild handling marks. Mechanically fine. The case is fine with two hairline cracks present on the lid and faded original lining showing high spot wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Factory Engraved Colt Model 1851 Navy Percussion Revolver

Lot # 218 (Sale Order: 217 of 664)      

Historic Cased Early Production Factory Engraved Colt Model 1851 Navy Percussion Revolver Passed Down Through the Family of Prominent Southern Episcopal Priest Francis L. Hawks and Captain Francis T. Hawks of the Confederate Engineer Corps

This incredibly high condition early factory engraved Colt Model 1851 Navy revolver was manufactured in 1852 and features beautiful early Hartford engraving. Finding these early factory engraved revolvers in high condition is extremely difficult, and few of them have known history. The engraving consists of very circular scroll patterns with some feather-like detailing on the rear third of the barrel, flats of the loading lever arm, essentially all of the frame, most of the hammer along with a bestial mask, and on the trigger guard and back strap along with wavy line borders and some areas of light crosshatching. The "COLT'S/PATENT" marking is engraved on the left side of the frame in a banner formed by the scrolls. This early style Hartford engraving is attributed to Thomas J. Barlow who engraved for Colt c. mid-1852 to early 1854 after previously working for Blunt & Syms in New York City (see "Colt Factory Engravers of the Nineteenth Century" by Herbert G. Houze for more on Barlow and other examples). The factory "dot" marking is stamped above or below the matching serial numbers on the barrel, frame, trigger guard, and backstrap. All of the visible serial numbers match. The barrel has a brass cone front sight and the one-line "-ADDRESS SAML COLT NEW YORK CITY-" address. The cylinder has the classic Naval Battle of Campeche roll scene and patent marking. A "T" is marked horizontally on the right side below the shoulder. The revolver comes in an exceptional presentation case with hunter green lining, an Eley Bros. cap tin, martial themed powder flask with sloped charger (original but not original to the set), brass ball/bullet mold with "COLT'S/PATENT" marked on the iron sprue cutter, a blued L-shaped combination tool, lead balls and conical bullets, and a key. The revolver is featured in the book "Colt 1851 Navies and 1861 Navies and Conversions" by Robert Jordan on page 267. The set is accompanied by an extensive binder of research and biographical information compiled by Greg Lampe in which he attributes the revolver as originally belonging to southern Episcopal minister, educator, and author Francis Lister Hawks and then likely given to given by him his son Francis Tomes Hawks in 1861 when the latter went off to war as a captain in the CSA Engineer Corps. This cased revolver came directly from the great-granddaughter of Captain Hawks, Katherine Vaux McCauley, to Michael Simens in 2012 and was subsequently purchased by Lampe. The documentation includes copies of correspondence from when the revolver was purchased from the family. They attributed the revolver as owned by the younger Hawks, but Lampe and others determined that based on the date of manufacture the revolver most likely was first owned by his father while he was an influential religious leader in New York City. Also included is "Revolutionary History of North Caroline in Three Lectures by Rev. Francis L. Hawks, D.D. LL. D., Hon. David L. Swain, LL. D., and Hon. Wm. A. Graham, LL. D." which was compiled by William D. Cooke and published in 1853 and a copy of "Adventures of Daniel Boone" from "A Library for My Young Countrymen" written by Francis L. Hawks and published as by "the author of Uncle Philip's Conversations."Francis Lister Hawks Dr. Francis Lister Hawks (1798-1866) had a diverse career as a lawyer, clergyman, educator, historian, and author. He was born in New Bern, North Carolina, to Francis Hawks and Julia Airway Stephens and was a grandson of John Hawks, the supervisory architect of Tryon Palace, the governor's home in New Bern. The family was fairly wealthy and held thirteen slaves in 1820. Francis L. Hawks graduated from the University of North Carolina in 1815 at the top of his class and then studied law under Judge William Gaston and John Stanley and was admitted to the bar in 1820 and practiced law. He also became a respected orator and represented New Bern in the House of Commons in 1821. In 1826, he began training for the Episcopalian ministry and studied under Reverend William Mercer Green and was ordained as a deacon by Bishop Ravenscroft in New Bern the following year and soon after was ordained as a priest. By 1833, he was the highest paid clergyman in the entire United States and was famed for his oratory skills as the rector of St. Thomas Church in New York City where he remained for twelve years. In 1832, he received his Doctor of Theology from Columbia College. During this period, he also taught at the seminaries, and he was the historiographer of the Episcopal Ch
more... Provenance: The Hawks and McCauley Family; Michael Simens' Historical Arms; The Greg Lampe Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 70,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1848 Baby Dragoon Percussion Revolver with Holster

Lot # 219 (Sale Order: 218 of 664)      

Desirable Historic Documented Colt Model 1848 Baby Dragoon Percussion Revolver with Six Inch Barrel, Holster, and Belt Attributed as Used by a Confederate Soldier from Virginia

The revolver was manufactured in 1850 towards the end of Baby Dragoon production and has a rare and desirable 6 inch octagon barrel without a loading lever. The barrel has a German silver cone front sight, the two-line "-ADDRESS SAML COLT/NEW-YORK CITY-" address, and a "T" on the back of the lug. The cylinder has the classic stagecoach hold-up scene and the oval cylinder stops. The left side of the frame has a series of seven dots/dashes on the left ahead of the small "COLTS/PATENT" marking. The revolver has a short trigger and the distinctive squareback trigger guard with a "T" and a dot on the right side. The revolver features all matching serial numbers aside from the wedge which is blank and appears to be original. It is accompanied by a black leather flap holster and a brown leather belt.The consignor indicated the revolver, holster, and belt were purchased at the Colt Collector's Association Show in Denver on October 3, 1998, from dealer David Condon, Inc. (receipt for purchase included) and indicates that it had previously been owned by a series of collectors and was identified as originally owned by a Confederate soldier from Virginia whose family later moved to Boise, Idaho. The revolver was purchased from the family by Tony Kojis, but he was unwilling to divulge the name of the family which he indicated had moved to Idaho from Virginia in the mid-20th century and that the gun had belonged to the grandfather who had fought for the Confederacy. He also indicated that the revolver, holster, and belt had all been together since at least 1875. The revolver is also featured on pages 23 (Fig. 15 barrel address) and 45 (Fig. 52 showing the full left side and noting the revolver as from the Dr. Robert M. Sandfort collection) of "Colt Pocket '49 Including the Baby Dragoon & Wells Fargo" by Jordan and Watt. 2003 paperwork from the Buffalo Bill Historical Center confirms the revolver, holster, and belt were loaned for the Colt Collectors Association Exhibit.

Class: Antique

Fine with 75% plus of the original blue finish remaining on the barrel, distinct cylinder scene and gray and brown patina on the cylinder, patterns of the muted original case colors on the hammer and frame and otherwise smooth patina, 95% plus original silver plating remaining on the grip frame and exhibiting an attractive dark aged patina, mild overall wear such as some dings and scratches. The grip is very fine and has most of the gloss original varnish remaining, minor edge wear, and tiny flakes at the toe and heel. Mechanically fine. The holster and belt are good and have mild overall wear, including a repaired loop on the holster and some flaking and crackling mainly on the belt. Overall a very attractive and desirable 6 inch Colt Baby Dragoon with a period belt and holster attributed to a Confederate soldier.

Provenance: The Tony Kojis Collection; The Glenn Mattox Collection; The John Gangel Collection; The Mitch Luksitch Collection; David Condon, Inc.; The Dr. Robert M. Sandfort Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

London Armoury Company Kerr Patent Percussion Revolver

Lot # 220 (Sale Order: 219 of 664)      

Fine Venables Retailer Marked London Armoury Company Kerr Patent Percussion Revolver

The distinctive Kerr's Patent Revolver was designed by James Kerr, cousin of Robert Adams, in 1855 and was manufactured by the London Armoury Company c. 1859-1866, mainly for export. This late production example (~11,000 made) was sold through the well-known John Venables shop at 99 St. Aldate Street in Oxford which opened shortly before 1832. It has a post front sight, notch rear sight, "VENABLES OXFORD" signed on top of the barrel, "L.A.C." for London Armoury Co. on the upper left followed by the London proof and view marks, "LONDON/ARMOURY" on the left side of the frame, "LONDON ARMOURY CO." signed on the lock, "KERR'S PATENT 10,828" on the right side of the frame, "10,828" repeated on the cylinder along with London proof and view marks, "416" on the face of the cylinder and side of the trigger, a checkered walnut grip, and a lanyard ring on the pommel cap.

Class: Antique

Fine with 80% original blue finish on the barrel and frame, patches of original blue and otherwise mostly smooth brown patina on the cylinder, light original case colors, mostly gray and brown patina on the lock, a few spots of mild oxidation/pitting, and generally rather minor overall wear. The grip is also fine and has crisp checkering, a hairline crack in the toe, and mostly minor wear. Mechanically excellent.

Provenance: The Phillip Otto Clark Collection

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Starr Arms Co. Percussion Breech Loading Carbine

Lot # 221 (Sale Order: 220 of 664)      

Excellent Civil War U.S. Starr Arms Co. Percussion Breech Loading Saddle Ring Carbine

Starr Arms Co. manufactured approximately 20,601 of these carbines during the Civil War. It features standard blade front and two-leaf rear sights, "STARR ARMS CO. YONKERS NY" on the top of the barrel in one line and repeated in two lines on the lock, "H.G.S" on the left of the breech end of the barrel and stock ahead of the heel, boxed script "STB" and "LAB" cartouches on the left stock flat, two-line Starr patent marking on the upper tang, and serial number "14341" on the right side of the breechblock and also likely concealed by the forearm, but the carbine was not disassembled out of respect for its high condition.

Class: Antique

Excellent with 98% plus original blue finish, 90% plus original case colors, attractive aged patina on the brass band and buttplate, some faint hints of oxidation mainly on the lever, and generally minimal age and storage related wear overall. The wood is also excellent and has raised grain, smooth oiled finish, distinct cartouches, and a few minor handling and storage marks. Mechanically excellent. This exceptional carbine will nicely fill the slot in your collection!

Provenance: The John R. McMurray Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Simeon North Model 1843 "Side Lever Hall" Breech Loading Carbine

Lot # 222 (Sale Order: 221 of 664)      

Exceptional U.S. Simeon North Model 1843 "Side Lever Hall" Breech Loading Saddle Ring Carbine

Approximately 10,500 of these "side lever" Hall-North Model 1843 carbines were manufactured by Simeon North of Middletown, Connecticut, in 1844-1853. The 1st and 2nd U.S. Dragoons were among the units issued these carbines during the Mexican-American War, and more than half are believed to have been rifled for use in the Civil War, making original smoothbore examples like this in high condition very scarce. It has a blade front sight, dovetailed notch rear sight at the front of the frame, "U.S./S. NORTH/MIDLtn/CONN./1847" marked breechblock, "JH" (Joseph Hannis) inspection initials marked on the right of the breech, a script "GWH" (George W. Hamlin) cartouche marked on the left stock flat, "WAT" (William A. Thornton) cartouche on the right flat, "H" inspection marks on various components, and small holes and an imprint from a now absent plaque on the right side of the butt.

Class: Antique

Exceptionally fine with 90% original brown finish, most of the original nitre blue remaining on the lever, light original case colors, and minimal age and storage related wear. The stock is excellent and has very crisp cartouches, minor dings, smooth oiled finish, and attractive raised grain. Mechanically excellent.

Provenance: The Mitch Lukisch Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War James Warner Patent Breech Loading Carbine

Lot # 223 (Sale Order: 222 of 664)      

Very Scarce and Extraordinary Civil War James Warner Patent Breech Loading Saddle Ring Carbine

These distinctive brass frame Warner carbines were manufactured c. 1864 to fill an Ordnance Department contract for 1,501 carbines, and Warner Carbines were issued to the 3rd Massachusetts and 1st Wisconsin Cavalry Regiments. However, this exceptional example does not have an inspector's cartouche and may have been sold privately. It also appears to have had the barrel and barrel band polished bright rather than blued. The left side of the brass frame is marked with "JAMES WARNER, SPRINGFIELD MASS" over "WARNER'S/PATENT" next to the saddle ring. The carbine has the smooth hook type breechblock release and saddle ring on the left side. It also has the breech locking lever incorporated on these first Warner manufactured carbines. The interior of the breechblock and frame are stamped with "16" visible when opened and "J." on the rear of the breechblock. The barrel is fitted with a notch and folding leaf rear sight graduated for 300, 500, and 800 yards. The forearm is secured to the barrel by an iron barrel band. A manual extractor lever is located at the rear of the forearm. The frame and buttplate are brass, and the latter is stamped with the serial number, "1526". The stock and forearm are walnut with a smooth oiled finish. An "L" inspector mark is stamped on the stock just to the rear of the lower tang and on top of the buttplate.

Class: Antique

Excellent with light patina forming on the otherwise bright finish on the barrel and barrel band, small spot of light pitting on the latter, strong original blue on the rear sight and ejector, 85% case colors on the hammer and trigger, very attractive aged patina on the frame and buttplate, and minor handling and storage marks. The wood is also excellent with a barely visible hairline grain separation present on the left side of the wrist. Mechanically excellent. One of the finest examples we have had the pleasure to offer.

Provenance: The Bob Noske Collection; The Ken Feryo Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 19,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Burnside Model 1865 Spencer Repeating Carbine

Lot # 224 (Sale Order: 223 of 664)      

Excellent Civil War U.S. Burnside Rifle Co. Model 1865 Spencer Repeating Carbine

The Burnside Rifle Co. retooled their facilities to manufacture Spencer carbines and made their first deliveries early in 1865. Some of the early carbines may have seen use in latter part of the Civil War and during the occupation of the South after the war early in Reconstruction. Spencers also continued to be used by the U.S. Army in the American West during various conflicts with Native American tribes as more settlers pushed into the West. They remained in use with the Army until the 1870s when they were replaced by the new Springfield Trapdoor rifles, and many were also in civilian and Native American hands and remained in use into the 20th century. This fantastic carbine clearly escaped such use and has remained nearly as it left the factory over a century and a half ago! It has the standard markings and features of the Burnside Model 1865 Spencers and has a crisp "DAP" cartouche on the left side of the stock.

Class: Antique

Excellent with 95% brilliant original case colors and 98% plus original blue finish. There are some minor scratches and blue flaking on the barrel band. The stock and forearm are also excellent with only slight handling marks. Mechanically excellent. This is certainly one of the absolute finest Model 1865 Spencer carbines this cataloger has seen!

Provenance: The Bob Noske Collection; The David Aroh Collection; Property of a Gentleman

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Sharps Small Frame Single Shot Breech Loading Pistol

Lot # 225 (Sale Order: 224 of 664)      

Scarce Sharps Small Frame Single Shot Breech Loading Pistol

Only 400-500 of these pistols are estimated to have been manufactured between late 1854 and the summer of 1855 at the Fairmount Rifle Works before production shifted to the large frame version. The left side of the frame is marked "SHARPS PATENT/ARMS MFED./FAIR MOUNT/PHILA. PA." A brass post/blade is used as the front sight, and a groove in the frame at the breech serves as the rear sight. Matching serial numbers are found on the lever, breechblock, left side of the grip frame, and inside of the grips (latter only partially visible due to inletting/shaping).

Class: Antique

Very good plus with strong traces of original blue finish visible on the barrel, traces of case colors, minor oxidation, and generally smooth patina. The grips are very fine with most of the original varnish, minor wear, including some dings and light scratches. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Era Martially Inspected Starr Model 1858 DA Army Rev

Lot # 226 (Sale Order: 225 of 664)      

Civil War Era Martially Inspected Starr Model 1858 Double Action Army Revolver

An estimated 23,000 of these revolvers were manufactured in the late 1850s and early 1860s; most were purchased by the U.S. Government. Production then shifted to the less expensive and more reliable single action Model 1863 upon the request of the government during the war following the Colt factory fire. Starr revolvers were widely used during the war and were third only to Colt and Remington. This example has the standard "STARR. ARMS. CO. NEW. YORK." address on left side of frame and "STARR'S PATENT JAN. 15, 1856" on the right. The serial numbers throughout match, and there are small Ordnance Department inspection marks on several components. The revolver is fitted with a smooth one-piece walnut grip with a "BH" ( Benjamin Hannis) cartouche on each side.

Class: Antique

Very fine. 70% plus of the bright original high polish blue finish and vibrant case colors remain. There are patches of brown patina where the finish has flake and some light scratches and slight pitting. The grip is also very fine and has only minor handling and storage type marks. Crisp markings throughout. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 9 of 27

1.178.0.859.0b0b16a.10.110