FISCHER AUCTION CO. INC. - Repo, Bankruptcy & Industrial Auction Center » May Beverage Equipment Traders Auction
May Beverage Equipment Traders Auction
Auction closed.
Auction closed.
May Beverage Equipment Traders Auction
Auction closed.
Auction closed.
Internet Premium: 16%
See Special Terms for additional fees
Cash Payment Discount: 3%
See Special Terms for additional fees
Cash Payment Discount: 3%
Description
Beverage Equipment Traders is auctioning off an assortment of brewing and brewery equipment along with some lab equipment.
Closed Lots
Stacked Serving Tanks
*Located in San Marcos CA
Required Rigging Fee: $160
Used, good condition
Manufacturer: Pacific Brewing Systems
Effective Volume: dual 10bbl
Total Volume: 20bbl
Single wall
Includes combined CIP/blow off arm for both units
Lower Unit: Front Manway, PRV on CIP/blow-off, sample valve, carbstone, thermowell, sprayball
Upper Unit: Top Manway, PRV on top, side drain, 2x ferrules, thermowell, sprayball
Dimensions: 64" diameter x 102" tall
Max operating pressure: 30 PSI
Required Rigging Fee: $160
Used, good condition
Manufacturer: Pacific Brewing Systems
Effective Volume: dual 10bbl
Total Volume: 20bbl
Single wall
Includes combined CIP/blow off arm for both units
Lower Unit: Front Manway, PRV on CIP/blow-off, sample valve, carbstone, thermowell, sprayball
Upper Unit: Top Manway, PRV on top, side drain, 2x ferrules, thermowell, sprayball
Dimensions: 64" diameter x 102" tall
Max operating pressure: 30 PSI
5bbl Fermenter
*Located in Ventura, CA
Required Rigging Fee: $80
Used, good condition
Jacketed, insulated, on casters
CIP/blowoff arm, top manway, rotating racking arm
Sample valve, pressure gauge, butterflies, and sight tube
Cosmetic dent in front
Required Rigging Fee: $80
Used, good condition
Jacketed, insulated, on casters
CIP/blowoff arm, top manway, rotating racking arm
Sample valve, pressure gauge, butterflies, and sight tube
Cosmetic dent in front
1bbl Brite Tank SS Brewtech
*Located in Ventura, CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module
Drain, multiple TC ports, and CIP arm
Pressure gauge and butterfly included
Required Rigging Fee: $80
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module
Drain, multiple TC ports, and CIP arm
Pressure gauge and butterfly included
6 Tap Kegerator
*Located in San Marcos CA
Required Rigging Fee: $80
Used
Manufacturer: Superior by True
Model: TDD-3
Dual towers with 3 faucets each; couplers included
115v, single phase, 8.5 amps
Required Rigging Fee: $80
Used
Manufacturer: Superior by True
Model: TDD-3
Dual towers with 3 faucets each; couplers included
115v, single phase, 8.5 amps
2 Tap Kegerator
*Located in San Marcos CA
Required Rigging Fee: $40
Used, good condition
Tested works well
Micromatic 2 Tap tower
Electrical: 110V
Includes CO2 Tank
Required Rigging Fee: $40
Used, good condition
Tested works well
Micromatic 2 Tap tower
Electrical: 110V
Includes CO2 Tank
1bbl SS Brewtech Fermenters 2x Quantity
Quantity: 2
*located in Ventura, CA
Required Rigging Fee: $160
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module for each tank
Racking port, drain, multiple TC ports, and CIP arm
Pressure gauge and PRV included
Required Rigging Fee: $160
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module for each tank
Racking port, drain, multiple TC ports, and CIP arm
Pressure gauge and PRV included
$800.00 x 2 = $1,600.00 Total
Premier 3-Head Keg Washer
*Located in Ventura, CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: Premier
230v, 3 Phase, 17.5 amps
3 KW immersion heater w/ digital thermostat set at 150...F
3 x Sankey valves, 1 x DEMA sanitizer dosing valve
1hp wash pump and control panel with digital temperature controller
Maximum temperature rating for the hose supplied with the unit is 150...F
Required Rigging Fee: $80
Used, good condition
Manufacturer: Premier
230v, 3 Phase, 17.5 amps
3 KW immersion heater w/ digital thermostat set at 150...F
3 x Sankey valves, 1 x DEMA sanitizer dosing valve
1hp wash pump and control panel with digital temperature controller
Maximum temperature rating for the hose supplied with the unit is 150...F
Chain Disk System
*Located in Ventura, CA
Required Rigging Fee: $40
Chain Disk System
chain disk parts box - palletized
Auger w/ Motor
drive motors - palletized
chain disk boot & parts box - palletized
Required Rigging Fee: $40
Chain Disk System
chain disk parts box - palletized
Auger w/ Motor
drive motors - palletized
chain disk boot & parts box - palletized
Premier Dual Head Keg Washer
*Located in San Marcos CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: Premier
Dimensions: 34" w x 26" d x 50" h
208-240 V, 3 Phase, 12.5 amps
3.0 KW immersion heater w/ digital thermostat set at 150 degrees F
7 x manual valves, 2 x Sankey valves, 1 x DEMA sanitizer dosing valve
0.75hp wash pump and control panel with digital temperature controller
Maximum temperature rating for the hose supplied with the unit is 150...F
Required Rigging Fee: $80
Used, good condition
Manufacturer: Premier
Dimensions: 34" w x 26" d x 50" h
208-240 V, 3 Phase, 12.5 amps
3.0 KW immersion heater w/ digital thermostat set at 150 degrees F
7 x manual valves, 2 x Sankey valves, 1 x DEMA sanitizer dosing valve
0.75hp wash pump and control panel with digital temperature controller
Maximum temperature rating for the hose supplied with the unit is 150...F
1bbl SS Brewtech Fermenters 2x Quantity
Quantity: 2
*located in Ventura, CA
Required Rigging Fee: $160
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module for each tank
Racking port, drain, multiple TC ports, and CIP arm
Pressure gauge and PRV included
Required Rigging Fee: $160
Used, good condition
Manufacturer: SS Brewtech
Top manway, fully jacketed
Individual temp control module for each tank
Racking port, drain, multiple TC ports, and CIP arm
Pressure gauge and PRV included
$800.00 x 2 = $1,600.00 Total
Grain Mill
*Located in San Marcos CA
Required Rigging Fee: $80
Used, good condition
Electrical: 220V
Made in China
Required Rigging Fee: $80
Used, good condition
Electrical: 220V
Made in China
Westrock CanCollar... Applicator
*Located in Ventura, CA
Required Rigging Fee: $80
Used, like new
Manufacturer: Westrock
Model: Chunk
4 x 6 pack carrier capacity
Compatible with CanCollar... family of can carriers
Required Rigging Fee: $80
Used, like new
Manufacturer: Westrock
Model: Chunk
4 x 6 pack carrier capacity
Compatible with CanCollar... family of can carriers
IDD Oxine Doser
*Located in Ventura, CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: IDD
Adjustable from 50-100 ppm
Automated for accurate high volumes
Secondary reservoir and a small diaphragm pump supply hoses and spray nozzles
Skid mounted
Link to manufacturer?s manual
Required Rigging Fee: $80
Used, good condition
Manufacturer: IDD
Adjustable from 50-100 ppm
Automated for accurate high volumes
Secondary reservoir and a small diaphragm pump supply hoses and spray nozzles
Skid mounted
Link to manufacturer?s manual
Paradigm 4 Head Bottle Filler
*Located in San Marcos CA
Required Rigging Fee: $80
Used, excellent condition
Manufacturer: Paradigm
4 Head adjustable filler with pack off table
16 BPM
Required Rigging Fee: $80
Used, excellent condition
Manufacturer: Paradigm
4 Head adjustable filler with pack off table
16 BPM
Carbonation Skid IDD
*Located in Ventura, CA
Required Rigging Fee: $160
New, excellent condition
Manufacturer: IDD Processing Systems
Skid mounted
Required Rigging Fee: $160
New, excellent condition
Manufacturer: IDD Processing Systems
Skid mounted
RAD Grain Mill
*Located in Ventura, CA
Required Rigging Fee: $80
New, excellent condition
Manufacturer: RAD
7.5hp, 3 phase, 230/470v, 20/10 amps
7,000 lbs/hr
Adjustable dual rollers
Magnet tray & manual slide gate
Required Rigging Fee: $80
New, excellent condition
Manufacturer: RAD
7.5hp, 3 phase, 230/470v, 20/10 amps
7,000 lbs/hr
Adjustable dual rollers
Magnet tray & manual slide gate
Inline Labeler
*Located in San Marcos CA
Required Rigging Fee: $160
Used, good condition
Manufacturer: In-Line
Model: 700MH
115v, single phase, 6 amps
Includes conveyance with collection table
Required Rigging Fee: $160
Used, good condition
Manufacturer: In-Line
Model: 700MH
115v, single phase, 6 amps
Includes conveyance with collection table
AC Chiller & Reservoir
*Located in San Marcos CA
Required Rigging Fee: $160
Used, good condition
Manufacturer: Trane/American Standard, 2005
Model: TTA090A300FA
208V, 3 Phase
Dimensions of Frame: 44"w x 48"l x 72"h
Tank Capacity: 120gal
Tank Dimensions: 30"diameter x 49"h
2/3 Selbach Water Bath Chiller
*Located in San Marcos CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: Selbach
Model: Powerkuhler BN 190
115v, single phase, 15 amps
2 x 2/3hp pumps with agitators
Water bath design
Required Rigging Fee: $80
Used, good condition
Manufacturer: Selbach
Model: Powerkuhler BN 190
115v, single phase, 15 amps
2 x 2/3hp pumps with agitators
Water bath design
1/3hp UBC Draft Chiller
*Located in San Marcos CA
Required Rigging Fee: $40
Used, good condition
Manufacturer: UBC Cooling
Model: Tayfun H-356
1/3 HP compressor
115V, single phase, 9.5 amps
Required Rigging Fee: $40
Used, good condition
Manufacturer: UBC Cooling
Model: Tayfun H-356
1/3 HP compressor
115V, single phase, 9.5 amps
CDA Labeler
*Located in Ventura, CA
Required Rigging Fee: $80
Used, good condition
Manufacturer: Chabot Delrieu Asc. (CDA)
Model: NINNON
24 cans per minute
208-250v, single phase
Pressure sensitive, plc controls
Required Rigging Fee: $80
Used, good condition
Manufacturer: Chabot Delrieu Asc. (CDA)
Model: NINNON
24 cans per minute
208-250v, single phase
Pressure sensitive, plc controls
39hp Rite Boiler
*Located in Fullerton CA
Required Rigging Fee: $320
Manufacturer: Rite,
Built in 2015
120v single phase, 15 psi, 1.65 million BTU
Includes: boiler, blowdown, feed tank, header system, steam traps
Required Rigging Fee: $320
Manufacturer: Rite,
Built in 2015
120v single phase, 15 psi, 1.65 million BTU
Includes: boiler, blowdown, feed tank, header system, steam traps
Inline Tube Heat Exchanger
*Located in Ventura, CA
Required Rigging Fee: $40
New, excellent condition
316 stainless
18? tube in shell design
Dual TC connections
Includes stand and temp probe
Required Rigging Fee: $40
New, excellent condition
316 stainless
18? tube in shell design
Dual TC connections
Includes stand and temp probe