Firearm & Militaria Auction
Sunday, December 6, 2015 | 10:00 AM Eastern
Auction closed.
Firearm & Militaria Auction
Sunday, December 6, 2015 | 10:00 AM Eastern
Auction closed.
Internet Premium: 18%
See Special Terms for additional fees
Cash Payment Discount: 3%
See Special Terms for additional fees
Cash Payment Discount: 3%
Description
Antique & Modern Guns, Military, Collectibles, Taxidermy & More
x Cancel
S&W .38 Safety Hammerless 3rd Model - .38 S&W
Lot # 1 (Sale Order: 1 of 593)
SERIAL #: 51239
DESIGN: Third Model hammerless break open double action with 5-shot cylinder. 3-1/4" solid ribbed barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered hard rubber grip panels with S&W monograms at the top.
FEATURES: Blade front sight. Groove rear sight. Knurled blued break open latch at rear of frame behind rear sight. Blued trigger guard. Backstrap safety.
CONDITION: Fine. Light scratches, patches of discoloration/loss of plating, and spotty pitting. Bore is good. Cylinder is very good and shows a modest drag line. Grip panels light wear.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
DESIGN: Third Model hammerless break open double action with 5-shot cylinder. 3-1/4" solid ribbed barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered hard rubber grip panels with S&W monograms at the top.
FEATURES: Blade front sight. Groove rear sight. Knurled blued break open latch at rear of frame behind rear sight. Blued trigger guard. Backstrap safety.
CONDITION: Fine. Light scratches, patches of discoloration/loss of plating, and spotty pitting. Bore is good. Cylinder is very good and shows a modest drag line. Grip panels light wear.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
Belgian Folding Trigger DA Revolver - .32 Cal.
Lot # 2 (Sale Order: 2 of 593)
SERIAL #: None
DESIGN: Double action with 6-shot cylinder. 2-1/8" barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Smooth wood bird's head grip panels.
FEATURES: Blade front sight. Groove rear sight. Folding trigger. Safety at left rear of frame. Belgian proofed on cylinder. Long ejector rod pulls out from cylinder pin and pivots to eject spent cartridges.
CONDITION: Fine. Light scratches, patches of discoloration/loss of plating, and spotty pitting. Grip panels show light wear with a crack on right panel at retention screw.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $150 - $250
DESIGN: Double action with 6-shot cylinder. 2-1/8" barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Smooth wood bird's head grip panels.
FEATURES: Blade front sight. Groove rear sight. Folding trigger. Safety at left rear of frame. Belgian proofed on cylinder. Long ejector rod pulls out from cylinder pin and pivots to eject spent cartridges.
CONDITION: Fine. Light scratches, patches of discoloration/loss of plating, and spotty pitting. Grip panels show light wear with a crack on right panel at retention screw.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $150 - $250
American Standard Tool Spur Trigger Rev. - .22 Cal
Lot # 3 (Sale Order: 3 of 593)
SERIAL #: 4201
DESIGN: Single action with 7-shot cylinder. 3-3/16" solid rib tip up barrel. Fashioned after the Manhattan Arms Company version of this type of revolver.
MATERIAL/FINISH COMPOSITION: Blued steel barrel assembly, cylinder, trigger, and hammer. Brass frame. Smooth wood grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top front of frame. Knurled hammer. Knurled blued break open latch at bottom rear of barrel assembly. Side plate on left side of frame held with one one screw. Light engraving on cylinder. Top of barrel rib stamped "AMERICAN STANDARD TOOL CO.NEWARK N.J.". Serial numbered on rear face of barrel assembly.
CONDITION: Very good. A consistent patina has replaced the finish on blued components. Light scratches and discoloration to brass components. Bore is fair to good. Old pitting to face of cylinder. Cylinder is fair to good with moderate wear to the engraving. Grip panels show light wear.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
DESIGN: Single action with 7-shot cylinder. 3-3/16" solid rib tip up barrel. Fashioned after the Manhattan Arms Company version of this type of revolver.
MATERIAL/FINISH COMPOSITION: Blued steel barrel assembly, cylinder, trigger, and hammer. Brass frame. Smooth wood grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top front of frame. Knurled hammer. Knurled blued break open latch at bottom rear of barrel assembly. Side plate on left side of frame held with one one screw. Light engraving on cylinder. Top of barrel rib stamped "AMERICAN STANDARD TOOL CO.NEWARK N.J.". Serial numbered on rear face of barrel assembly.
CONDITION: Very good. A consistent patina has replaced the finish on blued components. Light scratches and discoloration to brass components. Bore is fair to good. Old pitting to face of cylinder. Cylinder is fair to good with moderate wear to the engraving. Grip panels show light wear.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
Rollin White Arms Spur Trigger Revolver - 22 Short
Lot # 4 (Sale Order: 4 of 593)
SERIAL #: 1800
DESIGN: Single action with 7-shot removable cylinder. 3" solid ribbed octagonal barrel. Made for Smith & Wesson by Rollin White Arms Company in Lowell, Massachusetts.
MATERIAL/FINISH COMPOSITION: Blued steel barrel, cylinder, cylinder pin, trigger, and hammer. Brass frame. Smooth wood grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top rear of frame. Knurled hammer. Side plate on left side of frame held with one screw. Top of barrel rib stamped "MADE FOR SMITH & WESSON BY ROLLIN WHITE ARMS CO. LOWELL , MASS". Serial numbered on bottom of grip.
CONDITION: Very good. A consistent patina has replaced the majority of the finish on blued components. Light scratches and discoloration to brass components. Bore is fair. Old pitting to face of cylinder. Cylinder is fair to good. Grip panels show modest wear with numerous light scratches.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
DESIGN: Single action with 7-shot removable cylinder. 3" solid ribbed octagonal barrel. Made for Smith & Wesson by Rollin White Arms Company in Lowell, Massachusetts.
MATERIAL/FINISH COMPOSITION: Blued steel barrel, cylinder, cylinder pin, trigger, and hammer. Brass frame. Smooth wood grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top rear of frame. Knurled hammer. Side plate on left side of frame held with one screw. Top of barrel rib stamped "MADE FOR SMITH & WESSON BY ROLLIN WHITE ARMS CO. LOWELL , MASS". Serial numbered on bottom of grip.
CONDITION: Very good. A consistent patina has replaced the majority of the finish on blued components. Light scratches and discoloration to brass components. Bore is fair. Old pitting to face of cylinder. Cylinder is fair to good. Grip panels show modest wear with numerous light scratches.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
Wesson & Harrington # 3 Revolver - .32 Rim Short
Lot # 5 (Sale Order: 5 of 593)
SERIAL #: 5506
DESIGN: Single action spur trigger with 5-shot removable cylinder. 2-3/4" octagonal barrel. .32 rimfire short caliber.
MATERIAL/FINISH COMPOSITION: Iron frame. Blued components. Smooth rosewood bird's head grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top rear of frame. Knurled hammer and trigger. Circular side plate on left side of frame held with one one screw. Barrel flat on left side stamped "WESSON & HARRINGTON WORCESTER MASS. PAT. FEB. 7 JUNE 13 '71". Serial numbered on bottom left rear barrel flat. Long cylinder pin and ejector rod. Spring loaded button type cylinder pin release.
CONDITION: Very good. A consistent patina has replaced the majority of the finish on blued components. Light scratches and handling marks. Bore and cylinder are good. Grip panels show modest wear with a few light scratches.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
DESIGN: Single action spur trigger with 5-shot removable cylinder. 2-3/4" octagonal barrel. .32 rimfire short caliber.
MATERIAL/FINISH COMPOSITION: Iron frame. Blued components. Smooth rosewood bird's head grip panels.
FEATURES: Brass blade front sight. Groove rear sight at top rear of frame. Knurled hammer and trigger. Circular side plate on left side of frame held with one one screw. Barrel flat on left side stamped "WESSON & HARRINGTON WORCESTER MASS. PAT. FEB. 7 JUNE 13 '71". Serial numbered on bottom left rear barrel flat. Long cylinder pin and ejector rod. Spring loaded button type cylinder pin release.
CONDITION: Very good. A consistent patina has replaced the majority of the finish on blued components. Light scratches and handling marks. Bore and cylinder are good. Grip panels show modest wear with a few light scratches.
INVENTORY NO. / CATEGORY: 4284/ANT
ESTIMATE: $200 - $300
Black Powder Flintlock Pistol - .69 Cal.
Lot # 6 (Sale Order: 6 of 593)
SERIAL #: None
DESIGN: Single shot black powder flintlock pistol. 9-1/8” barrel. Single trigger.
MATERIAL/FINISH COMPOSITION: Steel barrel and lock. One piece wood stock.
FEATURES: No sights. Faded proofs on top rear of barrel. Brass fore-end tip, wedge pin guides, trigger guard, and grip cap. Lanyard ring at bottom of grip cap.
CONDITION: Good. Spotty patina on metal components. The trigger and lock work correctly. Brass components all have a dark patina. Stock shows scratches, scrapes, and gouges on all surfaces.
INVENTORY NO. / CATEGORY: 3443/ANT
ESTIMATE: $150 - $250
DESIGN: Single shot black powder flintlock pistol. 9-1/8” barrel. Single trigger.
MATERIAL/FINISH COMPOSITION: Steel barrel and lock. One piece wood stock.
FEATURES: No sights. Faded proofs on top rear of barrel. Brass fore-end tip, wedge pin guides, trigger guard, and grip cap. Lanyard ring at bottom of grip cap.
CONDITION: Good. Spotty patina on metal components. The trigger and lock work correctly. Brass components all have a dark patina. Stock shows scratches, scrapes, and gouges on all surfaces.
INVENTORY NO. / CATEGORY: 3443/ANT
ESTIMATE: $150 - $250
C. Sharps & Co. Model 1B 4-Shot Pepperbox
Lot # 7 (Sale Order: 7 of 593)
SERIAL #: 1803
DESIGN: 1st model single action breechloader with 4-barrel cluster. 2-1/2” barrels. .22 caliber.
MATERIAL/FINISH COMPOSITION: Blued steel. Brass frame. Smooth wood grip panels.
FEATURES: Bead front sight. V-notch rear sight. Knurled hammer. Spur trigger. Rotating firing pin. Fluted standing breech and rounded grip to frame juncture. Manufacturer and patent date stamped on left side of frame. Manufacturer and address stamped on right side of frame. Push button release on left side of frame allows barrel cluster to slide forward for loading and unloading.
CONDITION: Good. Less than 50% of the finish remains on the barrel cluster, hammer and trigger. Moderate discoloration to the brass frame with numerous small nicks and tooling marks. Serial number matches on bottom of barrel cluster and bottom of grip. Grip panels show moderate wear with a small piece missing from the bottom of the right grip panel.
INVENTORY NO. / CATEGORY: 3548/ANT
ESTIMATE: $300 - $400
DESIGN: 1st model single action breechloader with 4-barrel cluster. 2-1/2” barrels. .22 caliber.
MATERIAL/FINISH COMPOSITION: Blued steel. Brass frame. Smooth wood grip panels.
FEATURES: Bead front sight. V-notch rear sight. Knurled hammer. Spur trigger. Rotating firing pin. Fluted standing breech and rounded grip to frame juncture. Manufacturer and patent date stamped on left side of frame. Manufacturer and address stamped on right side of frame. Push button release on left side of frame allows barrel cluster to slide forward for loading and unloading.
CONDITION: Good. Less than 50% of the finish remains on the barrel cluster, hammer and trigger. Moderate discoloration to the brass frame with numerous small nicks and tooling marks. Serial number matches on bottom of barrel cluster and bottom of grip. Grip panels show moderate wear with a small piece missing from the bottom of the right grip panel.
INVENTORY NO. / CATEGORY: 3548/ANT
ESTIMATE: $300 - $400
S. North 1816 Bolster Percussion Conversion Pistol
Lot # 8 (Sale Order: 8 of 593)
SERIAL #: None
DESIGN: Single shot black powder pistol made by Simeon North of Middletown, Connecticut. 9-1/16” round barrel. .54 caliber.
MATERIAL/FINISH COMPOSITION: Iron mountings. Case hardened lockplate. One piece wood stock.
FEATURES: Brass blade front sight. One double barrel band. Iron ramrod and iron swivels. Side of bolster marked "AW". Left rear of barrel proofed "P / US". Cartouche is visible on left side of stock behind side plate.
CONDITION: Very good. Little of the original finish remains on metal components. Lock plate markings are absent. Moderate wear to stock with small gouges and a longitudinal crack on the left side at the front of the lock plate, one crack on the left of stock behind front barrel band, and a crack at the bottom of grip cap and lower tang.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $600 - $900
DESIGN: Single shot black powder pistol made by Simeon North of Middletown, Connecticut. 9-1/16” round barrel. .54 caliber.
MATERIAL/FINISH COMPOSITION: Iron mountings. Case hardened lockplate. One piece wood stock.
FEATURES: Brass blade front sight. One double barrel band. Iron ramrod and iron swivels. Side of bolster marked "AW". Left rear of barrel proofed "P / US". Cartouche is visible on left side of stock behind side plate.
CONDITION: Very good. Little of the original finish remains on metal components. Lock plate markings are absent. Moderate wear to stock with small gouges and a longitudinal crack on the left side at the front of the lock plate, one crack on the left of stock behind front barrel band, and a crack at the bottom of grip cap and lower tang.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $600 - $900
Elliot's Ring Trigger Derringer - .32 Rimfire
Lot # 9 (Sale Order: 9 of 593)
SERIAL #: 14613
DESIGN: Hammerless double action only top break with 4-barrel cluster. 3-3/8” barrels.
MATERIAL/FINISH COMPOSITION: Blued steel. Contoured walnut grip panels.
FEATURES: Brass blade front sight. Groove rear sight. Ring trigger. Rotating firing pin. Left side of barrel cluster stamped "MANUFACTURED BY E. REMINGTON & SONS. ILION. N.Y.". Right side of barrel cluster stamped "ELLIOTS' PATENTS. MAY 29 1860 - OCT. 1 1861". Sliding release on bottom of barrel cluster allows barrel cluster to tip upward for loading and unloading.
CONDITION: Very good. Little of the original finish remains on the barrel cluster. Some patina covers metal components along with light scratches on the frame. Light muzzle wear. Grip panels show modest wear.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $400 - $600
DESIGN: Hammerless double action only top break with 4-barrel cluster. 3-3/8” barrels.
MATERIAL/FINISH COMPOSITION: Blued steel. Contoured walnut grip panels.
FEATURES: Brass blade front sight. Groove rear sight. Ring trigger. Rotating firing pin. Left side of barrel cluster stamped "MANUFACTURED BY E. REMINGTON & SONS. ILION. N.Y.". Right side of barrel cluster stamped "ELLIOTS' PATENTS. MAY 29 1860 - OCT. 1 1861". Sliding release on bottom of barrel cluster allows barrel cluster to tip upward for loading and unloading.
CONDITION: Very good. Little of the original finish remains on the barrel cluster. Some patina covers metal components along with light scratches on the frame. Light muzzle wear. Grip panels show modest wear.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $400 - $600
H. Aston US Model 1842 Percussion Pistol
Lot # 10 (Sale Order: 10 of 593)
SERIAL #: None
DESIGN: Single shot black powder pistol made by Henry Aston and Ira M. Johnson of Middletown, Connecticut. 8-1/2” round barrel. .54 caliber
MATERIAL/FINISH COMPOSITION: Steel barrel and lock plate. Brass mountings. One piece wood stock.
FEATURES: Brass blade front sight. One brass barrel band with strap extension joining the lock plate. Brass trigger guard, lower tang, back strap, and grip cap. Swivel type steel ramrod with button shaped head. Left rear of barrel stamped "JH / P". Side plate stamped "US / H. ASTON" in front of the hammer and "MIDDTN . CONN / 1847" vertically behind the hammer. Blued trigger. Cartouches on left side of stock above trigger guard.
CONDITION: Fine. The original bright finished metal components have a modest patina. Old pitting at the muzzle, breech, and bolster. Brass components show moderate wear with tooling marks on the bottom of the grip cap. Ramrod is very good. Moderate wear to stock with light scratches and gouges. Longitudinal cracks on both sides of grip running from the back strap to the lock plate on the right side and trigger guard on the left. Two other small longitudinal cracks run from the front of the trigger guard forward at 45 degree angles.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $400 - $700
DESIGN: Single shot black powder pistol made by Henry Aston and Ira M. Johnson of Middletown, Connecticut. 8-1/2” round barrel. .54 caliber
MATERIAL/FINISH COMPOSITION: Steel barrel and lock plate. Brass mountings. One piece wood stock.
FEATURES: Brass blade front sight. One brass barrel band with strap extension joining the lock plate. Brass trigger guard, lower tang, back strap, and grip cap. Swivel type steel ramrod with button shaped head. Left rear of barrel stamped "JH / P". Side plate stamped "US / H. ASTON" in front of the hammer and "MIDDTN . CONN / 1847" vertically behind the hammer. Blued trigger. Cartouches on left side of stock above trigger guard.
CONDITION: Fine. The original bright finished metal components have a modest patina. Old pitting at the muzzle, breech, and bolster. Brass components show moderate wear with tooling marks on the bottom of the grip cap. Ramrod is very good. Moderate wear to stock with light scratches and gouges. Longitudinal cracks on both sides of grip running from the back strap to the lock plate on the right side and trigger guard on the left. Two other small longitudinal cracks run from the front of the trigger guard forward at 45 degree angles.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $400 - $700
Early French Military Type Flintlock Pistol
Lot # 11 (Sale Order: 11 of 593)
SERIAL #: None
DESIGN: Single shot black powder pistol. 7-3/4” octagonal to round barrel. Bore at the muzzle measures to approximately .60".
MATERIAL/FINISH COMPOSITION: Iron lock plate. Brass mountings. One piece wood stock.
FEATURES: Brass blade front sight. Brass trigger guard, lower tang, ramrod guides, fore-end cap, side plate screw housings, and grip cap. Tapered wood ramrod. Brass components line engraved at the borders with leaf engraving on the grip cap and an instrument motif on the bottom of the trigger guard. Lock plate is modestly engraved with another instrument motif at the rear of the plate.
CONDITION: Fine. The iron components have a modest patina with a flaking appearance to the barrel. Old pitting at the breech. Brass components show moderate wear and may have been cleaned at some point. Ramrod is very good, possibly a replacement. Moderate wear to stock with light scratches and gouges. Light longitudinal cracks developing with one "V" shaped crack at the rear of the top tang.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $600 - $800
DESIGN: Single shot black powder pistol. 7-3/4” octagonal to round barrel. Bore at the muzzle measures to approximately .60".
MATERIAL/FINISH COMPOSITION: Iron lock plate. Brass mountings. One piece wood stock.
FEATURES: Brass blade front sight. Brass trigger guard, lower tang, ramrod guides, fore-end cap, side plate screw housings, and grip cap. Tapered wood ramrod. Brass components line engraved at the borders with leaf engraving on the grip cap and an instrument motif on the bottom of the trigger guard. Lock plate is modestly engraved with another instrument motif at the rear of the plate.
CONDITION: Fine. The iron components have a modest patina with a flaking appearance to the barrel. Old pitting at the breech. Brass components show moderate wear and may have been cleaned at some point. Ramrod is very good, possibly a replacement. Moderate wear to stock with light scratches and gouges. Light longitudinal cracks developing with one "V" shaped crack at the rear of the top tang.
INVENTORY NO. / CATEGORY: 4285/ANT
ESTIMATE: $600 - $800
German DWM Model 1920 Commercial Luger - .30 Luger
Lot # 12 (Sale Order: 12 of 593)
SERIAL #: 5312
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Blank chamber. Top of toggle action marked "DWM". "Crown / N" proofed on bottom of barrel, toggle, and barrel assembly. Left front of frame stamped "GERMANY". Butt stock lug at bottom of rear grip strap. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one magazine with wood base.
CONDITION: Very good. Approximately 85% of the finish remains on metal components. Light spotty pitting. Bore is fair to good. Moderate wear to grip panels with wear to the checkering.
INVENTORY NO. / CATEGORY: 829-022/C&R
ESTIMATE: $600 - $800
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Blank chamber. Top of toggle action marked "DWM". "Crown / N" proofed on bottom of barrel, toggle, and barrel assembly. Left front of frame stamped "GERMANY". Butt stock lug at bottom of rear grip strap. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one magazine with wood base.
CONDITION: Very good. Approximately 85% of the finish remains on metal components. Light spotty pitting. Bore is fair to good. Moderate wear to grip panels with wear to the checkering.
INVENTORY NO. / CATEGORY: 829-022/C&R
ESTIMATE: $600 - $800
Colt Model 1903 Type III Pistol - .32 Auto
Lot # 13 (Sale Order: 13 of 593)
SERIAL #: 442731
DESIGN: Hammerless semiautomatic pistol with detachable magazine. 3-3/4" barrel.
MATERIAL/FINISH COMPOSITION: Charcoal blue steel. Checkered hard rubber grip panels with the Colt name at the top and the rampant colt at the bottom.
FEATURES: Blade front sight. U-notch rear sight. Grip safety. Left side of slide stamped with the manufacturer name and address as well as the 1897 and 1903 patent dates. Right side of slide stamped "COLT AUTOMATIC / CALIBRE 32 RIMLESS SMOKELESS". Comes with one magazine.
CONDITION: Good. approximately 60% of the finish remains on metal components. Light scratching throughout. Spotty light pitting on both sides of the frame above the trigger guard and rear of slide. Bore is good. Light wear to left grip panel.
INVENTORY NO. / CATEGORY: 852-088/C&R
ESTIMATE: $300 - $400
DESIGN: Hammerless semiautomatic pistol with detachable magazine. 3-3/4" barrel.
MATERIAL/FINISH COMPOSITION: Charcoal blue steel. Checkered hard rubber grip panels with the Colt name at the top and the rampant colt at the bottom.
FEATURES: Blade front sight. U-notch rear sight. Grip safety. Left side of slide stamped with the manufacturer name and address as well as the 1897 and 1903 patent dates. Right side of slide stamped "COLT AUTOMATIC / CALIBRE 32 RIMLESS SMOKELESS". Comes with one magazine.
CONDITION: Good. approximately 60% of the finish remains on metal components. Light scratching throughout. Spotty light pitting on both sides of the frame above the trigger guard and rear of slide. Bore is good. Light wear to left grip panel.
INVENTORY NO. / CATEGORY: 852-088/C&R
ESTIMATE: $300 - $400
Walther Model AC-42 P-38 Pistol - 9mm Cal.
Lot # 14 (Sale Order: 14 of 593)
SERIAL #: 8454K
DESIGN: Double action semi-automatic with detachable magazine. 5" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Serrated brown/black plastic grip panels.
FEATURES: Blade front sight. U-notch rear sight. Serrated hammer. Safety at left rear of frame. Lanyard ring at bottom of left grip panel. Left side of slide stamped "P.38", "ac/42", and "8454K". "E/359" proof marks on left side of frame above trigger and right side of slide. Nazi Eagle proof also appears on right side of slide. Comes with two magazines.
CONDITION: Very good. Approximately 70% of the finish remains on metal components. Loss of bluing consistent with age. Light scratching and handling marks. Bore is good. Light wear to grip panels.
INVENTORY NO. / CATEGORY: 3904-025/C&R
ESTIMATE: $400 - $600
DESIGN: Double action semi-automatic with detachable magazine. 5" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Serrated brown/black plastic grip panels.
FEATURES: Blade front sight. U-notch rear sight. Serrated hammer. Safety at left rear of frame. Lanyard ring at bottom of left grip panel. Left side of slide stamped "P.38", "ac/42", and "8454K". "E/359" proof marks on left side of frame above trigger and right side of slide. Nazi Eagle proof also appears on right side of slide. Comes with two magazines.
CONDITION: Very good. Approximately 70% of the finish remains on metal components. Loss of bluing consistent with age. Light scratching and handling marks. Bore is good. Light wear to grip panels.
INVENTORY NO. / CATEGORY: 3904-025/C&R
ESTIMATE: $400 - $600
German DWM Luger Pistol - .30 Luger Cal.
Lot # 15 (Sale Order: 15 of 593)
SERIAL #: 8692
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Undated. Top of toggle action marked "DWM". "Crown / N" proofed on bottom of barrel, toggle, and barrel assembly. Butt stock lug at bottom rear of grip. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one magazine with wood base.
CONDITION: Very good. Approximately 80% of the finish remains on metal components. Most of the wear at the edges. Bore is very good. Moderate wear to grip panels with wear to the checkering. Magazine has a fairly tight fit to magazine well.
INVENTORY NO. / CATEGORY: 3658-036/C&R
ESTIMATE: $700 - $900
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Undated. Top of toggle action marked "DWM". "Crown / N" proofed on bottom of barrel, toggle, and barrel assembly. Butt stock lug at bottom rear of grip. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one magazine with wood base.
CONDITION: Very good. Approximately 80% of the finish remains on metal components. Most of the wear at the edges. Bore is very good. Moderate wear to grip panels with wear to the checkering. Magazine has a fairly tight fit to magazine well.
INVENTORY NO. / CATEGORY: 3658-036/C&R
ESTIMATE: $700 - $900
Husqvarna Swedish Model 40 Pistol - 9mm Cal.
Lot # 16 (Sale Order: 16 of 593)
SERIAL #: D7544
DESIGN: Semi-automatic with detachable magazine. 4-3/4" barrel. Swedish version of the Finnish L-35 Lahiti pistol.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered brown plastic grip panels with the Husqvarna crown "H" motif at the top.
FEATURES: Large blade front sight. U-notch rear sight. Serrated grips at rear of bolt. Safety at left rear of frame. Lanyard ring at rear of frame. Shoulder stock lug at bottom rear of grip. Left side of barrel assembly stamped "HUSQVARNA VAPENFABRIKS A.B". Comes with one magazine.
CONDITION: Excellent. Approximately 90% + of the finish remains on metal components. Light scratching and handling marks. Bore is excellent. Minimal wear to grip panels.
INVENTORY NO. / CATEGORY: 3658-039/C&R
ESTIMATE: $400 - $600
DESIGN: Semi-automatic with detachable magazine. 4-3/4" barrel. Swedish version of the Finnish L-35 Lahiti pistol.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered brown plastic grip panels with the Husqvarna crown "H" motif at the top.
FEATURES: Large blade front sight. U-notch rear sight. Serrated grips at rear of bolt. Safety at left rear of frame. Lanyard ring at rear of frame. Shoulder stock lug at bottom rear of grip. Left side of barrel assembly stamped "HUSQVARNA VAPENFABRIKS A.B". Comes with one magazine.
CONDITION: Excellent. Approximately 90% + of the finish remains on metal components. Light scratching and handling marks. Bore is excellent. Minimal wear to grip panels.
INVENTORY NO. / CATEGORY: 3658-039/C&R
ESTIMATE: $400 - $600
Mauser S/42 (1939) Luger Pistol - 9mm Cal.
Lot # 17 (Sale Order: 17 of 593)
SERIAL #: 6896
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Dated 1931 on top front of frame. Top of toggle action marked "S/42". "Eagle/63" proofed on right front of frame. Butt stock lug at bottom rear of grip. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one non-matching magazine also proofed "Eagle/63".
CONDITION: Good. Approximately 60% of the finish remains on metal components. Loss of bluing on the barrel. Spotty pitting. Bore is fair to good. Moderate wear to grip panels with wear to the checkering.
INVENTORY NO. / CATEGORY: 4316-027/C&R
ESTIMATE: $700 - $900
DESIGN: Semiautomatic with detachable magazine. 3-7/8" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered wood grip panels.
FEATURES: Blade front sight. V-notch rear sight. Dated 1931 on top front of frame. Top of toggle action marked "S/42". "Eagle/63" proofed on right front of frame. Butt stock lug at bottom rear of grip. Lanyard loop at top rear of frame. No grip safety. Serial number matches on frame, bottom of barrel, and various other components. Comes with one non-matching magazine also proofed "Eagle/63".
CONDITION: Good. Approximately 60% of the finish remains on metal components. Loss of bluing on the barrel. Spotty pitting. Bore is fair to good. Moderate wear to grip panels with wear to the checkering.
INVENTORY NO. / CATEGORY: 4316-027/C&R
ESTIMATE: $700 - $900
CZ-BRNO Model CZ-52 Pistol - 7.62 x 25mm Cal.
Lot # 18 (Sale Order: 18 of 593)
SERIAL #: D 05857
DESIGN: Single action semiautomatic pistol with detachable magazine. 4-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel components. Serrated brown plastic grip panels.
FEATURES: Partridge style sights. Serrated and bobbed hammer. Lanyard ring at bottom of grip frame. Import marked on right front of frame. Comes with two magazines, cleaning rod, and leather holster.
CONDITION: Very good. Approximately 80% of the finish remains on metal components. Numerous light scratches and handling marks, mainly at the edges. Bore is very good. Grip panels show moderate wear. Holster shows light wear.
INVENTORY NO. / CATEGORY: 4316-033/C&R
ESTIMATE: $200 - $300
DESIGN: Single action semiautomatic pistol with detachable magazine. 4-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel components. Serrated brown plastic grip panels.
FEATURES: Partridge style sights. Serrated and bobbed hammer. Lanyard ring at bottom of grip frame. Import marked on right front of frame. Comes with two magazines, cleaning rod, and leather holster.
CONDITION: Very good. Approximately 80% of the finish remains on metal components. Numerous light scratches and handling marks, mainly at the edges. Bore is very good. Grip panels show moderate wear. Holster shows light wear.
INVENTORY NO. / CATEGORY: 4316-033/C&R
ESTIMATE: $200 - $300
3 Spur Trigger Handguns in Display Case
Lot # 19 (Sale Order: 19 of 593)
1) J. Stevens No. 41 Tip Up (5th Model) Pocket Pistol - .22 Rimfire Cal. SERIAL #: 32733
DESIGN: Single shot tip up action. 3-1/2" octagon to round barrel.
MATERIAL/FINISH COMPOSITION: Blued steel barrel, hammer and trigger. Nickel plated frame. Smooth wood grip panels.
FEATURES: Blade front sight. Groove rear sight on top of recoil shield. Knurled hammer. Spur trigger. Top of barrel is stamped "J STEVENS A.&T. CO. / CHICOPEE FALLS. MASS. U.S.A.". Serial number stamped on left rear of barrel.
CONDITION: Good. Modest flaking to the plated surface at the edges. Barrel shows moderate loss of bluing and light pitting. Barrel release button is missing. Hammer and trigger work. Light wear to grip panels.
INVENTORY NO. / CATEGORY: 4318-015/C&R 2) Tramps-Terror Marked Spur Trigger Revolver - .22 Short SERIAL #: None
DESIGN: Single action with 7-shot cylinder. 2-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Smooth wood grip panels.
FEATURES: Bead front sight. Knurled hammer. Spur trigger. Bird's head grip. Unfluted cylinder. Top of frame stamped "TRAMPS-TERROR".
CONDITION: Good. Moderate loss of finish with a dark patina. Some tooling marks to the guide rod pin. Moderate drag line on cylinder. Hammer and trigger work. Moderate wear to grip panels with a longitudinal crack and some loss of material to the right grip panel.
INVENTORY NO. / CATEGORY: 4318/ANT 3) XX Standard 1873 Spur Trigger Revolver - .22 Long Rimfire Cal. SERIAL #: 6725
DESIGN: Single action with 7-shot cylinder. 3" tip up round barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Nickel plated brass frame. Checkered hard brown rubber grip panels with a star burst at the top of each panel.
FEATURES: Blade front sight. Groove rear sight. Knurled hammer. Spur trigger. Bird's head grip. Fluted cylinder. Top of barrel rib is stamped "XX STANDARD 1873". Left side of barrel stamped "J.M. MARLIN,NEW HAVEN.CT.U.S.A. PAT JULY,1.1873".
CONDITION: Very Good. Moderate loss and flaking to the plated surfaces. Hammer and trigger work. Minimal wear to grip panels.
INVENTORY NO. / CATEGORY: 4318/ANT
ESTIMATE: $200 - $400
DESIGN: Single shot tip up action. 3-1/2" octagon to round barrel.
MATERIAL/FINISH COMPOSITION: Blued steel barrel, hammer and trigger. Nickel plated frame. Smooth wood grip panels.
FEATURES: Blade front sight. Groove rear sight on top of recoil shield. Knurled hammer. Spur trigger. Top of barrel is stamped "J STEVENS A.&T. CO. / CHICOPEE FALLS. MASS. U.S.A.". Serial number stamped on left rear of barrel.
CONDITION: Good. Modest flaking to the plated surface at the edges. Barrel shows moderate loss of bluing and light pitting. Barrel release button is missing. Hammer and trigger work. Light wear to grip panels.
INVENTORY NO. / CATEGORY: 4318-015/C&R 2) Tramps-Terror Marked Spur Trigger Revolver - .22 Short SERIAL #: None
DESIGN: Single action with 7-shot cylinder. 2-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Smooth wood grip panels.
FEATURES: Bead front sight. Knurled hammer. Spur trigger. Bird's head grip. Unfluted cylinder. Top of frame stamped "TRAMPS-TERROR".
CONDITION: Good. Moderate loss of finish with a dark patina. Some tooling marks to the guide rod pin. Moderate drag line on cylinder. Hammer and trigger work. Moderate wear to grip panels with a longitudinal crack and some loss of material to the right grip panel.
INVENTORY NO. / CATEGORY: 4318/ANT 3) XX Standard 1873 Spur Trigger Revolver - .22 Long Rimfire Cal. SERIAL #: 6725
DESIGN: Single action with 7-shot cylinder. 3" tip up round barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Nickel plated brass frame. Checkered hard brown rubber grip panels with a star burst at the top of each panel.
FEATURES: Blade front sight. Groove rear sight. Knurled hammer. Spur trigger. Bird's head grip. Fluted cylinder. Top of barrel rib is stamped "XX STANDARD 1873". Left side of barrel stamped "J.M. MARLIN,NEW HAVEN.CT.U.S.A. PAT JULY,1.1873".
CONDITION: Very Good. Moderate loss and flaking to the plated surfaces. Hammer and trigger work. Minimal wear to grip panels.
INVENTORY NO. / CATEGORY: 4318/ANT
ESTIMATE: $200 - $400
Davis Industries D-22 O/U Pistol - .22 Cal.
Lot # 20 (Sale Order: 20 of 593)
SERIAL #: 356515
DESIGN: Over and under pistol. 2-3/8" tip up barrels.
MATERIAL/FINISH COMPOSITION: Chrome plated steel components. Plastic simulated white ivory grip panels.
FEATURES: Blade front sight. Groove rear sight. Serrated hammer. Spur trigger. Comes with owner's manual and original box.
CONDITION: Excellent. Approximately 95% + of the finish remains on metal components. Bores are very good. Minimal wear to grip panels. Box is excellent.
INVENTORY NO. / CATEGORY: 4098-002/FFL
ESTIMATE: $100 - $150
DESIGN: Over and under pistol. 2-3/8" tip up barrels.
MATERIAL/FINISH COMPOSITION: Chrome plated steel components. Plastic simulated white ivory grip panels.
FEATURES: Blade front sight. Groove rear sight. Serrated hammer. Spur trigger. Comes with owner's manual and original box.
CONDITION: Excellent. Approximately 95% + of the finish remains on metal components. Bores are very good. Minimal wear to grip panels. Box is excellent.
INVENTORY NO. / CATEGORY: 4098-002/FFL
ESTIMATE: $100 - $150
Bersa Thunder 380 Pistol - .380 Auto
Lot # 21 (Sale Order: 21 of 593)
SERIAL #: B68407
DESIGN: Hammered double action/single action semiautomatic pistol with detachable magazine. 3-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Duotone finish with matte blued steel slide and silver alloy frame. Checkered black polymer grip panels with the Bersa name at the top.
FEATURES: 3-dot sight system. Serrated bobbed hammer. Safety at left rear of frame. Magazine release at rear of trigger guard on left side. Comes with one magazine with finger extension.
CONDITION: Excellent. Approximately 95% + of the finish remains on metal components. A few light handling marks. Bore is excellent. No wear to grip panels.
INVENTORY NO. / CATEGORY: 852-087/FFL
ESTIMATE: $200 - 300
DESIGN: Hammered double action/single action semiautomatic pistol with detachable magazine. 3-1/2" barrel.
MATERIAL/FINISH COMPOSITION: Duotone finish with matte blued steel slide and silver alloy frame. Checkered black polymer grip panels with the Bersa name at the top.
FEATURES: 3-dot sight system. Serrated bobbed hammer. Safety at left rear of frame. Magazine release at rear of trigger guard on left side. Comes with one magazine with finger extension.
CONDITION: Excellent. Approximately 95% + of the finish remains on metal components. A few light handling marks. Bore is excellent. No wear to grip panels.
INVENTORY NO. / CATEGORY: 852-087/FFL
ESTIMATE: $200 - 300
Colt Detective Special Revolver - .38 Special
Lot # 22 (Sale Order: 22 of 593)
SERIAL #: C14048
DESIGN: Double action with 6-shot swing out cylinder. 2" barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered wood wrap around grip panels.
FEATURES: Long blade front sight. Groove rear sight. Serrated hammer. Shrouded hammer.
CONDITION: Excellent. Approximately 95% + of the finish remains unblemished. Sporadic light handling marks. Bore is excellent. Cylinder is very good and shows a light drag line. Grip panels show minimal wear.
INVENTORY NO. / CATEGORY: 4142-001/FFL
ESTIMATE: $500 - $600
DESIGN: Double action with 6-shot swing out cylinder. 2" barrel.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered wood wrap around grip panels.
FEATURES: Long blade front sight. Groove rear sight. Serrated hammer. Shrouded hammer.
CONDITION: Excellent. Approximately 95% + of the finish remains unblemished. Sporadic light handling marks. Bore is excellent. Cylinder is very good and shows a light drag line. Grip panels show minimal wear.
INVENTORY NO. / CATEGORY: 4142-001/FFL
ESTIMATE: $500 - $600
Rohm Model RG-10S Revolver - .22 Caliber
Lot # 23 (Sale Order: 23 of 593)
SERIAL #: 58316
DESIGN: German made double action with 6-shot cylinder. 3-1/4" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered white plastic grip panels with "RG10S" medallions at the top.
FEATURES: Blade front sight. Groove rear sight. Serrated hammer. Comes with cardboard box and cleaning brush.
CONDITION: Very good. Approximately 85% + of the finish remains on metal components. Sporadic light handling marks. Bore is good. Cylinder is good and shows a very light drag line. Grip panels show minimal wear. Box is very good with light surface wear.
INVENTORY NO. / CATEGORY: 4142-002/FFL
ESTIMATE: $100 - $150
DESIGN: German made double action with 6-shot cylinder. 3-1/4" barrel.
MATERIAL/FINISH COMPOSITION: Blued steel. Checkered white plastic grip panels with "RG10S" medallions at the top.
FEATURES: Blade front sight. Groove rear sight. Serrated hammer. Comes with cardboard box and cleaning brush.
CONDITION: Very good. Approximately 85% + of the finish remains on metal components. Sporadic light handling marks. Bore is good. Cylinder is good and shows a very light drag line. Grip panels show minimal wear. Box is very good with light surface wear.
INVENTORY NO. / CATEGORY: 4142-002/FFL
ESTIMATE: $100 - $150
2 Iver Johnson Top Break Revolvers - .32 S&W Cal.
Lot # 24 (Sale Order: 24 of 593)
1) Iver Johnson Top Break Revolver - .32 S&W Cal. SERIAL #: 46005
DESIGN: Double action break open revolver with 5-shot cylinder. 3” barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered black hard rubber grip panels with owl logos at the top.
FEATURES: Blade front sight. U-notch rear sight. Knurled hammer. Blued trigger guard. Case hardened hammer and trigger.
CONDITION: Fair. Approximately 50% of the plating remains on metal components. Some flaking and loss of plating at the top strap, barrel assembly, and on cylinder. Bore and cylinder are fair. Trigger works but has to be manually reset to the forward position. Grip panels show light wear.
INVENTORY NO. / CATEGORY: 4183-001/C&R 2) Iver Johnson Top Break Revolver - .32 S&W Cal. SERIAL #: None
DESIGN: Double action break open revolver with 5-shot cylinder. 5” barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered black hard rubber grip panels with owl logos at the top.
FEATURES: Blade front sight. U-notch rear sight. Knurled hammer. Blued trigger guard. Case hardened hammer and trigger. Comes with right handed leather hip holster.
CONDITION: Very good. Approximately 80% + of the plating remains on metal components. Some flaking at the top strap and on cylinder. Bore and cylinder are fair to good. Trigger works but has to be manually reset to the forward position. Grip panels show light wear. Holster shows modest wear.
INVENTORY NO. / CATEGORY: 4183-002/C&R
ESTIMATE: $80 - $100
DESIGN: Double action break open revolver with 5-shot cylinder. 3” barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered black hard rubber grip panels with owl logos at the top.
FEATURES: Blade front sight. U-notch rear sight. Knurled hammer. Blued trigger guard. Case hardened hammer and trigger.
CONDITION: Fair. Approximately 50% of the plating remains on metal components. Some flaking and loss of plating at the top strap, barrel assembly, and on cylinder. Bore and cylinder are fair. Trigger works but has to be manually reset to the forward position. Grip panels show light wear.
INVENTORY NO. / CATEGORY: 4183-001/C&R 2) Iver Johnson Top Break Revolver - .32 S&W Cal. SERIAL #: None
DESIGN: Double action break open revolver with 5-shot cylinder. 5” barrel with solid rib.
MATERIAL/FINISH COMPOSITION: Nickel plated steel. Checkered black hard rubber grip panels with owl logos at the top.
FEATURES: Blade front sight. U-notch rear sight. Knurled hammer. Blued trigger guard. Case hardened hammer and trigger. Comes with right handed leather hip holster.
CONDITION: Very good. Approximately 80% + of the plating remains on metal components. Some flaking at the top strap and on cylinder. Bore and cylinder are fair to good. Trigger works but has to be manually reset to the forward position. Grip panels show light wear. Holster shows modest wear.
INVENTORY NO. / CATEGORY: 4183-002/C&R
ESTIMATE: $80 - $100
General Custer 1861 Navy Replica by Franklin Mint
Lot # 25 (Sale Order: 25 of 593)
SERIAL #: 13511
DESIGN: Non-firing replica of General Custer's Colt 1861 Navy revolver made by Franklin Mint. 6-shot cylinder. 7-1/2" round barrel. .36 caliber.
MATERIAL/FINISH COMPOSITION: Nickel and gold electroplated metal. Checkered ivory colored plastic grip panels.
FEATURES: Brass post front sight. V-notch rear sight located on tip of hammer. Knurled spur hammer. Hammer, cylinder, and loading lever are gold plated. Barrel, frame, trigger guard, and front and rear grip straps are nickel plated. All metal components are engraved with decorative motifs and border decoration. Top of barrel stamped "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-". Bottom left grip panel has molded depiction of American Eagle and shield. Uses the original serial number of 13511. Comes with cardboard sleeve, foam insert, letter of authenticity, and pamphlet on General Custer.
CONDITION: Excellent. A few light scratches and handling marks. Box is very good.
INVENTORY NO. / CATEGORY: 4210/NRR
ESTIMATE: $100 - $200
DESIGN: Non-firing replica of General Custer's Colt 1861 Navy revolver made by Franklin Mint. 6-shot cylinder. 7-1/2" round barrel. .36 caliber.
MATERIAL/FINISH COMPOSITION: Nickel and gold electroplated metal. Checkered ivory colored plastic grip panels.
FEATURES: Brass post front sight. V-notch rear sight located on tip of hammer. Knurled spur hammer. Hammer, cylinder, and loading lever are gold plated. Barrel, frame, trigger guard, and front and rear grip straps are nickel plated. All metal components are engraved with decorative motifs and border decoration. Top of barrel stamped "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-". Bottom left grip panel has molded depiction of American Eagle and shield. Uses the original serial number of 13511. Comes with cardboard sleeve, foam insert, letter of authenticity, and pamphlet on General Custer.
CONDITION: Excellent. A few light scratches and handling marks. Box is very good.
INVENTORY NO. / CATEGORY: 4210/NRR
ESTIMATE: $100 - $200
