Maas Companies Inc Auction Catalog - AUCTION: 35,000 Ton/Year Wood Pellet Plant Online Auctions

A $25,000 Certified Deposit is due prior to bidding on Real Estate (Tract 1 and Tract 2). Contact Maas Companies Direct for Deposit Information 507-285-1444.

Real Estate & Equipment

Lot #Tract1 (Sale Order 1 of 94)

35,000 Ton/Year Wood Pellet Plant: 43,750 Sq. Ft. Industrial Building on 8.59± Acres with All Pellet Mill Equipment & Support Equipment (lots 10 - 115). A $25,000 Certified Deposit is due prior to bidding on Real Estate.

Real Estate

Lot #Tract2 (Sale Order 2 of 94)

43,750 Sq. Ft. Industrial Building on 8.59+/- Acres. A $25,000 Certified Deposit is due prior to bidding on Real Estate.

Bulk Equipment

Lot #Tract3 (Sale Order 3 of 94)

Entirety of Pellet Mill Equipment & Support Equipment

KEITH WALKING FLOOR METERING BIN

Lot #12 (Sale Order 4 of 94)

18 ft. high x 10 ft. wide x 53 ft. long (approx. reported OAD), 80 ton Capacity powered by Independent Hydraulic Power Unit, 10 hp High Pressure 2250 psi Standby Pressure 300 psi LS 6 gpm; having 15 ft. long x 20 in. dia. (approx.) Flared U-Troughed, End-Mounted, Side Delivery Discharge Conveyor; with End-Mounted Chip Recycle/Blending Feed Hopper having 15 ft. length x 16 in. dia. (approx.), Flared, U-Trough, Side Delivery Discharge Conveyor.

CONVEYOR, CHIP STORAGE TO HAMMER MILL

Lot #13 (Sale Order 5 of 94)

120 ft. long (approx.) x 25 in. wide, having Troughing Rollers, Trussed, Fluted Head and Tail Stock, Full Length, 180° Galvanized Weather Protection Covers, having Magnet Bar-Type Separator Infeed Attachment, INDUSTRIAL MAGNETICS Inc, Super Strong Magnet, 11 in. high x 30 in. long x 21 in. deep, #SRMC12-24A126; FALK Quadrive model 5203-J25, ratio 26.642, powered by 50 hp (approx) Electric Motor. With 120 ft. (approx.) Trussed Bridge Support Structure having a 20 in. wide (approx.) Expanded Metal, Side-Mounted, Full-Length Catwalk having 2- Bar Safety Hand Railings with Bottom Positioned Toe Boards located on Both Sides, Supported at Intermediate Points by 2- Fabricated H-Frames, One is equipped with a Climbing Ladder with Safety Cage.

BLISS HAMMER MILL, GREEN

Lot #14 (Sale Order 6 of 94)

ER-4436-TF, Eliminator s/n 7056, (NOTE: The serial number reported was not visually verified.) Powered by WORLDWIDE ELECTRIC CORPORATION 300 hp Electric Motor, 460 VAC, 60 hz, 1785 rpm, 3- Phase, 449T Frame, having Model SF-400HD Bar-Type Magnet Separator Infeed Attachment, with Model 2RF-SMA-8 Adaptor, Plenum. (Reported but not visually verified.) With KICE CYCLONIC PARTICLE SEPARATOR VJ 10x8x8 s/n 282174-2 C42222 (Mfg. 4/4/2011) 42 in. dia. x 12 ft. (approx.) Stainless Steel, having KICE Rotary Air Lock, powered by Siemens 10 hp (approx.) Electric Motor. With KICE CENTRIFUGAL FAN FC 13 s/n 282174-3-1 (Mfg. 4/6/2011) Powered by SIEMENS 20 hp Electric Motor. With CONVEYOR, GREEN HAMMER MILL TO ROTARY DRUM DRYER 45 ft. long x 20 in. dia. (approx.) U-Trough, Single Auger, Covered Top, Incline, powered by Electric Motor driving through FALK Reduction Gear Box. With MACHINERY MEZZANINE FOR GREEN HAMMER MILL Consisting of but not necessarily limited to: 17 ft. 6 in. high x 14 ft. wide x 28 ft. deep (approx.) having Stairways with Safety Railings, Maintenance Deck, Covered with Bar Grating Decking with Safety Railings and Toe Board (NOTE: The Stairway Landing and Cross-over Deck goes with Lot 14).

BLISS 29 (approx.) SCREENS, HAMMER MILL

Lot #15 (Sale Order 7 of 94)

For Bliss Model E-4436T Hammer Mills, consisting of but not necessarily limited to: 6- 5/8 in. Holes, Screens; 8- 5/16 in. Holes, Screens ; 4- 1/2 in Holes, Screens; 4- 3/8 in. Holes, Screens; 2- 1/4 in. Holes, Screens; 1- 1/2 in. Hole, Screen, Used; 2- 7/16 in. Holes, Screens; 2- Undetermined Holes, Screens.

BIO-MASS BURNER SYSTEM AND ROTARY DRUM DRYER

Lot #16 (Sale Order 8 of 94)

Consisting of but not necessarily limited to: With ECO-THERM BIO-MASS BURNER FEED SYSTEM 20.375 MM BTU/hr., Reported Capacity Consisting of but not necessarily limited to: Supply Bin/Surge Hopper, Side Off-Set Transition, V-Shaped Hopper having a Rotary Mixing Shaft, Bottom Mounted 6 in. x 8 ft. long (approx.) Feed-to-Center Screw Auger, KICE Rotary Air Lock, KICE Model FC11W8 Centrifugal Fan, s/n 278135-41-1 (Mfg. 11/2/2010) powered by Electric Motor. With ECO-THERM BIO-MASS BURNER Having a 84 in. dia. x 9 ft. tall (approx.) Top Section Firing Chamber, 72 in. dia. x 8 ft. tall (approx.) To Section and 42 in. dia. x 6 ft. tall Exhaust Stack, Carbon Steel. With KICE CENTRIFUGAL FAN BURNER FORCED AIR FC 19 s/n 278135-2-1 (Mfg. 11/4/2010) Stainless Steel powered by SIEMENS 30 hp Electric Motor with Manually Adjustable Louvered Damper. With ECO-THERM FURNACE OUTLET DUCT FEED TEE 48 in. dia. x 112-1/2 in. T, Carbon Steel. With BAKER-RULLMAN, INC. ROTARY DRUM DRYER, 3- PASS SD 90-30 S.O. # 5206 Powered by Electric Motor having Linked Chain Drive, (NOTE: The Exterior Metal Skin covering the Area between the Circumferential Structural Steel Members is Deformed and not Properly Fitted throughout the Length of the Drum. It is recommended an Exterior and Interior Inspection by a Qualified and Knowledgeable Contractor be conducted to determine Operational Condition of the Unit. With DRIED BIO-MASS MATERIAL HANDLING SYSTEM Consisting of but not necessarily limited to: 1- 55 ft. long x 22 in. dia. (approx.) Dried Fiber Transfer Duct Work, Stainless Steel; 2- ECO-THERM Cyclonic Particle Separators, 36 in. dia. x 15 ft. tall (approx.), Each having Diffuser and KICE Rotary Air Lock, 1- Conveyor, 27 ft. long x 20 in. dia. (approx.), U-Trough Auger Conveyor powered by Electric Motor having Bottom Mounted Air Operated Back-Up Relief/Discharge Gate; 1- AIR PRO Model 1EAH400 Centrifugal Fan, s/n 17764 (Mfg. 2010), powered by WORLDWIDE ELECTRIC CORPORATION 75 hp Electric Motor, mounted in 25 ft. high x 5 ft. x 8 ft. Fabricated Steel Skeleton Support Tower.

BM&M 2- DECK SUPER SCREEN VIBRATING DRY MATERIAL SCREENER

Lot #17 (Sale Order 9 of 94)

6X12 2DSS s/n 16253 (Mfg. 2010) 6 ft. x 12 ft. With 12 (approx)- Screens, Most appear Unused/New, 1- Group is in an unopened OEM Shipping Box.

BLISS HAMMER MILL, DRY

Lot #18 (Sale Order 10 of 94)

E-4436-TFA Eliminator s/n 7057 (NOTE: This serial number is reported but was not visually verified.) Powered by WORLDWIDE ELECTRIC CORPORATION 300 HP Electric Motor, 460 VAC, 60 hz, 1785 rpm, s/n 907005, 449T Frame with Model SF-400H Bar Type Magnet Separator Infeed Attachment, with Model SF 500H Adaptor. (Reported but not visually verified.) With MACHINERY MEZZANINE FOR SCREEN AND HAMMER MILL Consisting of but not necessarily limited to: 10 ft. high x 15 ft. wide x 25 ft. 8 in. deep (approx.); having Maintenance Deck, covered with Bar Grating with Safety Hand Railings and Toe Board. (NOTE: See lot 14- Stairway and landing to remain with lot 14.)

DUCT WORK, HAMMER MILL TO CYCLONE SEPARATOR, DUST COLLECTOR

Lot #19 (Sale Order 11 of 94)

Consisting of but not necessarily limited to: 120 ft. long x 16 in. dia. (approx.) Steel Piping having 1- KICE 20 in. x 15 in. x 15 in. Rotary Air Valve powered by Electric Motor. With KICE AIR PULSE JET, SOCK TYPE, DUST COLLECTOR VR 132-10 s/n 278135-5-1 (Mfg. 11/11/2010) Having Carbon Steel Body and Stainless Steel Clean-Out Doors, Conical Hopper bottom with KICE 24 in. x 15 in. x 15 in. Rotary Air Lock powered by Electric Motor, 1- KICE Model 67Q6-2 Rotary Air Lock, s/n 278135-11, C41267 (Mfg. 10/25/2010) powered by Electric Motor; 1- KICE Model CD18R/H Cyclonic Particle Separator, s/n 278038-2-1, (Mfg. 11/2/2010), having a KICE 10 in. x 8 in. x 8 in. (approx.) Rotary Air Lock powered by Electric Motor.

KICE 2 DUST COLLECTORS

Lot #20 (Sale Order 12 of 94)

KICE AIR PULSE JET, SOCK TYPE, DUST COLLECTOR VR 132-10 s/n 278135-19-1 (Mfg. 11/11/2010) Having Carbon Steel Body and Stainless Steel Clean-Out Doors, Conical Hopper Bottom with KICE 24 in. x 15 in. x 15 in. Rotary Air Lock powered by Electric Motor, with PLC Industrial Panel Enclosure, KICE Inches of Water Gauge; KICE Model VR16-6H s/n 278135-26-1 (Mfg. 11/2/2010). With KICE AIR PULSE JET, SOCK TYPE, DUST COLLECTOR VR16-6 H s/n 278135-26-1 (Mfg. 11/2/2010) Having KICE Model VJ16 x 12 x 12 Rotary Air Lock, 278135-21, C41197, (Mfg. 10/25/2010), 16 in x 12 in. x 12 in., powered by Electric Motor, Mounted in Fabricated Steel Skeleton Tower having Climbing Ladder with Safety Cage and Maintenance Catwalk. With KICE ROTARY AIR LOCK VJ10X8X8 s/n 278135-28 C42746 (Mfg. 10/20/2010) Stainless Steel Maintenance Doors, 10 in. x 8 in. x 8 in., powered by WATT SAVER Electric Motor, 3/4 hp, mounted on 4- Angle Iron Steel Legs.

KICE 2 VACUUM UNITS

Lot #21 (Sale Order 13 of 94)

KICE ROOTS TYPE VACUUM UNIT MD5514 s/n 241433 and 278136-10-1 (Mfg. 11/11/2010) Equipped with intake Air Silencers, Discharge Receiver Tank, Individually powered by SIEMENS Electric Motor, Unitized and Mounted on a Common Fabricated Steel Framework. With KICE ROOTS TYPE VACUUM UNIT MD5514 s/n 239171 and 278135-29-1 (Mfg. 11/11/2010) Equipped with intake Air Silencers, Discharge Receiver Tank, Individually powered by Electric Motor, Unitized and Mounted on a Common Fabricated Steel Framework.

KICE 3 CENTRIFUGAL FANS

Lot #22 (Sale Order 14 of 94)

KICE CENTRIFUGAL FAN FC17W24 s/n 278135-22-1 (Mfg. 11/1/2010) Powered by SIEMENS 75 hp Electric Motor, Mounted on Fabricated Steel Base Frame, having 4- Vibration Damper Feet. KICE CENTRIFUGAL FAN FC17W24 s/n 278135-8-1 (Mfg. 11/10/2010) Powered by SIEMENS 75 hp Electric Motor, Mounted on Fabricated Steel Base Frame, having 4- Vibration Damper Feet. KICE CENTRIFUGAL FAN FC11W4 s/n 278038-5-1 (Mfg. 11/2/2010) Powered by SIEMENS 7.5 hp Electric Motor, Mounted on Fabricated Steel Base Frame, having 4- Vibration Damper Feet.

IMPERIAL STORAGE SILO DRY MATERIAL PELLET MILL FEED

Lot #23 (Sale Order 15 of 94)

70 15 s/n I-56353 (Mfg. 2010) Steel Legged Tank, Consisting of but not necessarily limited to: 8 ft. dia. x 19 ft. 10-1/2 in. Straight Wall Height, with a 8 ft. 7-1/2 in. Conical Hopper Bottom, Max Capacity 1127 cu. ft., Max Tonnage 8.4525, with Bin-Di-Cators, and Bin Vibrators, with 10 ft. tall (approx.) Transition Hopper Bottom, 1- 15 ft. long x 16 in. dia. (approx.)

BLISS PELLET MILL

Lot #24 (Sale Order 16 of 94)

Pioneer Model 200B-120 s/n 3144 (NOTE: The serial number reported was not visually verified.) Powered by 2- WORLDWIDE ELECTRIC CORPORATION Model WWE300-12-449T, 300 hp Electric Motors, s/n 10007-JBJ, 460 VAC, 60 hz, 1191 rpm (Mfg. 2/2009); and Model WWE 300-12-449T-F2, s/n 10003-KEJ, (Mfg. 6/2010), 1191 rpm; Having BLISS Model C18144 15 ft. long x 16 in. dia. (approx.) Tubular Type Feed Conditioner s/n 4155 (NOTE: The serial number reported was not visually verified.); 1- Die and 3- Planetary Extrusion Rollers (Installed); with Wall Mounted Tool Board containing 15- (approx.) Specialized Tools for Mill.

KICE CYCLONIC PARTICLE SEPARATOR, PELLET COOLER

Lot #25 (Sale Order 17 of 94)

FC13W6 s/n 278135-17 (Mfg. 11/2/2010) Stainless Steel, 20 in. dia. x 4 ft. high (approx.), with KICE Rotary Air Lock, mounted on a Fabricated Carbon Steel Base Frame; powered by SD100 SIEMENS 15hp Electric Motor. With KICE ROTARY AIR LOCK VJ16X12X12 s/n 278/35-16 C42816 (Mfg. 10/19/2010) Powered by WATT SAVER 3/4 hp Electric Motor.

ECO-THERM / BLISS PELLET COOLER

Lot #26 (Sale Order 18 of 94)

8 ft. dia. x 4 ft. (approx.) Straight Wall Height having Hopper Bottom, 42 in. dia. x 42 in. high (approx.), Top Infeed Cap; with KICE Model Rotary Vane Valve Feeder, s/n 278135-23-1 (Mfg. 11/11/2010) powered by WATT SAVER 2 hp Electric Motor.

BM&M DUAL VIBRATING PELLET SCREEN

Lot #27 (Sale Order 19 of 94)

3x6 2DMSS s/n 16254 (Mfg. 2010) Powered by BALDOR 2 hp Electric Motor.

IMPERIAL BAGGING FEED SILO, FINISHED PELLET

Lot #28 (Sale Order 20 of 94)

45 40 s/n I-56354 (Mfg. 2010) Steel Legged Tank, consisting of but not necessarily limited to: Max Capacity- 2,333 cu. ft., Max Tonnage- N/A, Max Operating Weight - 110,700 lbs., with Bin-Di-Cators, and Bin Vibrators, with 10 ft. tall (approx.) Transition Hopper Bottom, 1- 15 ft. long x 16 in. dia. (approx.) (approx.) V-Trough Screw Auger Discharge Conveyor, Max Density 15 lbs./cu. ft., Mounted on 4-H Beam Steel Legs, each 25 ft. tall (approx.) having 2- Section Aluminum Climbing Ladder with Safety Cage and Mid-Point Landing. 2500 cfm, 47 tons reported Capacity; with KICE Model 4E30 Multi-Aspirator, s/n 278135-32 (Mfg. 10/25/2010), 2500cfm, 47 tons reported capacity, with KICE Rotary Air Lock. With 2- Section Aluminum Climbing Ladder, Top Mounted Safety Railing having Toe Board; KICE 52 in. tall x 18 in. dia. (approx.) Cyclonic Particle Separator, KICE Rotary Air Lock, Intake and Exhaust Piping, Mounted on 4- H Beam Steel Legs.

RETHCEIF 2010 VERTICAL FREE FLOW BAGGING SYSTEM

Lot #29 (Sale Order 21 of 94)

Drawing No. 1051-A0015 s/n VFF-5010-8382-A0001 Having Pre-Weigh Course-Fine Feed Gate, Surge Bin Feed Hopper, Form Fill Seal Technology, Allen Bradley Panelview C600 Control Panel with New Spare Unit still in box; misc. Spare Rollers and Auxiliary Quality Control Scale, Machine Manual; 30 in. max film dia., 44 in. max width. With 6- PALLETS PLASTIC BAGS 23 Rolls, 28 x 39.63.

LAMBERT MATERIAL HANDLING CONVEYOR, ROLLER-OVER-POWERED FLAT BELT

Lot #30 (Sale Order 22 of 94)

24 in. wide x 6 ft. long (approx.). With LAMBERT MATERIAL HANDLING BAG FLATTENER UNIT Powered Flat Belt Conveyor, 24 in. wide x 92 in. long OAD (approx.). With LAMBERT MATERIAL HANDLING PALLET FEED MODULE Consisting of but not necessarily limited to: 1- Pallet Supply Module and 1- Tear Sheet Applicator. With LAMBERT MATERIAL HANDLING PALLET STACK STATION AND SHRINK WRAP FEED CONVEYOR Having 51 in. Powered Rollers x 16 ft. long (approx.).

KUKA ROBOTER GMBH PALLETIZING ROBOT

Lot #31 (Sale Order 23 of 94)

KR100-2PA s/n 941761 (Mfg. 6/2010) Load 100 kg, Range 3200mm, having Bag Lift Arm Attachment 4 ft. x. 4 ft. (approx.) powered Roller Pick Station, 50 ft. (approx.) of 6 ft. high (approx.) Work Area Safety Fencing. With KUKA ROBOTER GMBH HMI / PLC OPERATORS CONTROL CABINET Type KRC2 / AK10 Having Portable Operators Control Hand Device, Cable Connected to Control Cabinet.

M. J. MAILLIS/WULFTEC.COM PALLET WRAP MACHINE

Lot #32 (Sale Order 24 of 94)

WCA - Smart Series s/n 69556-1-1010 12 amp, 460 volt, 3 phase; Having 80 in. dia. (approx.) Turn Table with Top Sheet Applicator Gantry Type Unit; with Operators HMI/PLC Control Cabinet, ALLEN BRADLEY PANEL VIEW C600 HMI Controller, Free-Standing, Floor Mounted Type; with 8 ft. long (approx.) of Outfeed Powered Roller Conveyor having a 15 ft. long (approx.) Extension; with Wood Crate believed to contain Spare Conveyor Rollers; with 4- Pallets Shrink Wrap supplies. With LOT SHRINK WRAP PLASTIC AND PLASTIC SHEETING 1- Pallet (partial) with 5- Rolls Shrink-Wrap Plastic, 9-1/2 in. dia. x 30 in. long; 1- Pallet with 14- Rolls Shrink Wrap Plastic, 9-1/2 in. dia. x 30 in. long; 7- Boxes of Clear Single Wound Plastic Sheeting, 70 in. wide x .002. With LOT CONSUMABLE SUPPLIES Consisting of but not necessarily limited to: 2- Pallets (1- Partial), 33- Boxes of 13- White Opaque Bags, 54 x 44 x 68, 60 RL, Black Ink (Unused /Unopened); 20 - Boxes White Opaque 54 x 44 x 68, 60/RL Red Ink (Unused/Unopened).

SQUARE D/SCHNEIDER ELECTRIC 2 SECTIONS MOTOR CONTROL CENTER

Lot #40 (Sale Order 25 of 94)

Consisting of but not necessarily limited to: 2- SQUARE D/SCHNEIDER ELECTRIC, QED Type S Series 2 Power Style® Switchboard Sections, 2000 amps max Supply Rating, 480Y/277v, 60 hz, with 1- RK2000 PowerPact®, 1- RK 1200 PowerPact®, and 3- AL250JD PowerPact® Circuit Breakers; Chipper Motor C.B., MCC2, OLP, MLP, 1 of 2 G-246435, 2 of 2 G-239477; SQUARE D Power Logic PM800 Touch Screen.

ROCKWELL AUTOMATION / RITTAL 3 SECTIONS ELECTRICAL AUTOMATION SWTICHGEAR CABINETS

Lot #41 (Sale Order 26 of 94)

1- Cabinet consisting of but not necessarily limited to: M-155-1 Chipper Motor Soft Start, M-155-1 Chipper Motor Overload, M-155-1 Chipper Motor C.B.; 1- ALLEN BRADLEY Model 140U-N6 Molded Case Circuit Breaker Frame; 3- LIMITRON Model KLU-1000 Fuses; 1- Cabinet consisting of but not necessarily limited to: 1- ALLEN BRADLEY Model 100-D860 Series B, 4- Fuse Blocks, (NOTE: Fuses are not installed), 1- RITTAL Model SK 3327117 Cabinet Ventilation Fan; 1- Cabinet consisting of but not necessarily limited to: 1- ALLEN BRADLEY Cat. No. 150-F7880NBE Line Voltage Controller; 1- RITTAL Model SK 3327117 Cabinet Ventilation Fan.

ALLEN BRADLEY 4 SECTIONS INTELLICENTER, MCC

Lot #42 (Sale Order 27 of 94)

Centerline® 2100 Containing 10- Motor Starters. W-LHCX69/1 Series N, Horiz Power 600, Vert Power 300, Type 1G Enclosure; W-LFPW06/1 Series N, Horiz Power 600, Vert Power 300, 1 of 3, M-200-1 Green Chip Hydraulic Unit, M-200-2 Green Chip WF Spikeroll 1, CD2DN-2 Communication Module, CD2DN-2 Power Supply, M-200-3 Green Chip WF Spikeroll 2, Spare. W-LFPW06/1 Series N, Horiz Power 600, Vert Power 300, 2 of 3, M-260 Green Chip Metering Auger, M-150-2 Debarker Hydraulic Pump, M-205 Green Chip WF Metering Auger, M-175 Bark Exit Conveyor. W-LFPW06/1 Series N, Horiz Power 600, Vert Power 300, 3 of 3, M-150-1 Debarker Motor, M-265 Green Chip Conveyor, MCC#2 Main Lug Section.

ALLEN BRADLEY 12 SECTIONS MOTOR CONTROL CENTER CABINETS

Lot #43 (Sale Order 28 of 94)

Centerline® 2100 Consisting of but not necessarily limited to: 12- Cat. No. W LEPW06/2 Type 1 G Enclosure, 1200 amps, having 37- (approx.) Motor Starters from 75 hp to 5 hp (approx.) Motors. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 1 of 12, M-215 Inclined Belt Conveyor, M-405 Drum Dryer, M-410A Burner Makeup Air Fan. W-LFPW06/3, Horiz Power 1200A, Vert Power NA, 2 of 12, Spare. W-LFPW06/3, Horiz Power 1200A, Vert Power NA, 3 of 12, M-425 Dryer Fan. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 4 of 12, M-430A Dryer Discharge Airlock A, M-430B Dryer Discharge Airlock B, M-435 Dryer Screener Inlet Conveyor, M-446 Fuel Bin Agitator, M-455 Burner Fuel Delivery Fan. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 5 of 12, M-500 Dry Screener, M-510 Dry Screener Accepts Airlock, M-520 Dry HM DF Fan. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 6 of 12, M-525 Dry HM DF Airlock, M-540 Burner Fuel Bin, Infeed Airlock, M-625A Pellet Mill A Feeder. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 7 of 12, M-640A Hot Pellet Fan A, M-645A Hot Pellet Airlock A, CD2DN-1 Communication Module, CD2DN-1 Power Supply, M-655 Pellet Screener, M-660 Cooler Rotary Feeder. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 8 of 12, M-670 Cooler / Aspirator Fan, M-675 Cooler / Aspirator DF RV, M-320 Green HM Air System Airlock. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 9 of 12, M-705 Airlock Finish Pellet Cyclone, M-715 Aspirator Inlet Rotary Feeder, M-730 Finished Pellet APU, M-735 Finished Pellet DF Rotary RV, M-690 PM Dry Additive Airlock, M-415 Dryer Inlet Airlock. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 10 of 12, Spare, Spare, Spare, M-695 PM Additive Blower, M-445 Burner Fuel Bin Metering Auger, M-325 Green HM Fan. W-LFPW06/3, Horiz Power 1200A, Vert Power 300A, 11 of 12, M-250 Corn Grind Hammermill, M-245 Corn Grind Feeder, Spare. W-LFPW06/3, Horiz Power 1200A, Vert Power NA, 12 of 12, MCC #5 Main LUG Section.

ALLEN BRADLEY 7 SECTIONS MOTOR CONTROL CENTER CABINETS

Lot #44 (Sale Order 29 of 94)

Centerline® 2100 Consisting of but not necessarily limited to: 7- Cat. No. W LFPW06/2, Type 2 G Enclosure, 1200 Amps, having 1- Section Main Lug, 3- Sections for Green Hammer Mill and 3- Sections for Dry Hammer Mill, Sections 4 of 7 and 7 of 7 are Equipped with HMI/PLC Module. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 1 of 7, MCC #4 Main LUG Section. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 2 of 7, M-305 Green Hammermill. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 3 of 7, M-305 Green Hammermill. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 4 of 7, M-305 Green Hammermill. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 5 of 7, M-505 Dry Hammermill. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 6 of 7, M-505 Dry Hammermill. W-LFPW06/2, Horiz Power 1200A, Vert Power NA, 7 of 7, M-505 Dry Hammermill.

ROCKWELL AUTOMATION / RITTAL 3 SECTION ELECTRICAL MCC EQUIPMENT

Lot #45 (Sale Order 30 of 94)

Dedicated to BLISS Pellet Mill, consisting of but not necessarily limited to: M-630A-1 Pellet Mill A Soft Start, M630A-1 Pellet Mill A overload, M630A-1 Pellet Mill A C.B.; 3- No. WE-M1W000052-01WC, 480 VAC, 60 hz, 724 amps, Type 12 Enclosure, Largest Motor 300 hp, having 1- Circuit Breaker Section, 1- Overload Section and 1- Soft Start Section; This Panel Contains an HMI/PLC Module; Middle Unit has 6- Fuses with 5- amp Trap 2000 AJT 500 500A Fuses installed and 1- Low Peak Dual Emergency Time Delay installed.

SQUARE D 3 SECTION SWITCHBOARDS

Lot #46 (Sale Order 31 of 94)

SQUARE D SWITCHBOARD QED, Type S, Power Style® G-239478 Type 1 Enclosure, 480Y/277 VAC, 4000 amps Input having SQUARE D Model NW 40 H3 MasterPack Low-Voltage Power Circuit Breaker. SQUARE D SWITCHBOARD QED, Type S, Power Style® G-246456 Type 1 Enclosure, 480Y/277 VAC, 4000 amps Input having SQUARE D Model RL1200 PowerPack® Circuit Breaker. SQUARE D SWITCHBOARD QED, Type S, Power Style® G-246111 Type 1 Enclosure, 480Y/277 VAC, 4000 amps Input having 3- SQUARE D Model RL1200 PowerPack® Circuit Breakers. MCC5, Pellet Mill A Circuit Breaker, MCC4.

ICAD PLANT AUTOMATION CONTROL SYSTEM

Lot #47 (Sale Order 32 of 94)

With DELL COMPUTER, SMALL FORM FACTOR DELL OptiPlex 780 A4B04LN1 (Mfg. 9/28/2010) With Screen, Keyboard, Mouse, and TRIPP-LITE UPS; Windows 7 Pro. With ECO-THERM ELECTRICAL CIRCUIT CONTOL PANEL CP-1 Wall Positioned, Floor Mounted, having an Emergency Stop Button, Key Controlled and on Automation Direct No. ZP-PNA-06-101 Zip Port. With ECOTHERM/ICAD INDUSTRIAL CONTROL AND DESIGN, INC. WALL MOUNTED CONTROL PANEL CP-2 20 amp, rating having Key Accessed Emergency Button. With ECOTHERM/ICAD INDUSTRIAL CONTROL AND DESIGN, INC. WALL MOUNTED CONTROL PANEL CP-3 20 amp, rating having Key Accessed Emergency Button. With ECOTHERM/ICAD INDUSTRIAL CONTROL AND DESIGN, INC. WALL MOUNTED CONTROL PANEL CP-4 20 amp, rating having Key Accessed Emergency Button (Located with Lot 11). With ECOTHERM/ICAD INDUSTRIAL CONTROL AND DESIGN, INC. AUTOMATION AND CONTROL PANEL CP-5 s/n 178155 Having 5- ALLEN BRADLEY Flex I/0 Modules and Other Items. With ECOTHERM/ICAD INDUSTRIAL CONTROL AND DESIGN, INC. AUTOMATION AND CONTROL PANEL CP-6 With HARDY INSTRUMENTS Touch Pad Weight Controller Waversaver C2, IT, SMM.

SQUARE D COMPANY TRANSFORMER, OUTDOOR EQUIPMENT, PAD MOUNTED

Lot #48 (Sale Order 33 of 94)

High Voltage, Primary 4- Sections, Outdoor, Pad Mounted.

LOT 2 TRANSFORMERS, OUTDOOR EQUIPMENT, PAD MOUNTED

Lot #49 (Sale Order 34 of 94)

1- 3000 KVA, Oil Cooled; 1- 1500 KVA Oil Cooled, Pad Mounted Transformer. With FARM BOY SILO Galvanized Steel, Rolled Corrugation, 8 Rings High, 4- Side-Wall Mounted Sight Gauges, Climbing Ladder. (Note: The hopper bottom is open, the fill-pipe to the top is not connected.)

FLAMEX, INC FIRE DETECTION & EXTINGUISHING CONTROL CABINET

Lot #50 (Sale Order 35 of 94)

MINIMAX, FMZ 5000 HMT Enclosed in Steel Cabinet, Wall Mounted, having a Full-View Glass Door.

F S CURTIS ROTARY SCREW AIR COMPRESSOR

Lot #51 (Sale Order 36 of 94)

GS40 VSD Air End s/n ASB090010, s/n 01A110001 (Mfg. 1/2011) With ECOOL TECHNOLOGY Demand Smart™ Energy Management System; 180 cfm, 125 max psi, 40 hp, 460 volt, 60Hz; AIMS PLUS Touch Screen Control Panel; 13,461 hrs reported on 9/19/2013; weight 2300 lbs. With STEEL FABRICATORS VERTICAL AIR RECEIVER TANK 250 gal. (approx.) Capacity, Dished Top and Bottom, on Skirted Base. With VAN AIR HEATLESS REGENERATIVE COMPRESSED AIR DRYER HL 200-250 Free Standing, Twin Pedestal, Floor Type Base, 2- VAN AIR Compressed Air and Gas Filters.

CORE CONVAULT DIESEL FUEL STORAGE TANK

Lot #52 (Sale Order 37 of 94)

WRN 500 2 SF s/n R748173 (Mfg. 10/2010) 500 gal., Above Ground, Hardened, UL2085 Vehicle Impact and Projectile Resistant; having MORRIS BROTHERS COMPANY Figure 918 Feet and Inches Clock Gauge Alarm; 7 ga. plate thickness, Emergency Relief Venting 94,000 cfh.

MISCELLANEOUS FURNITURE AND EQUIPMENT

Lot #54 (Sale Order 38 of 94)

2- Tables, 1- Folding Leg; Clothing Locker, Wood, having 8- Individual Compartments; 1- QUARTET Dry Marker Board, 3 ft. x 4 ft. (approx.) 3- 3M Hearing Protectors; 1- 4- Drawer Lateral File Cabinet, 42 in. wide.

SHOP BREAK ROOM

Lot #56 (Sale Order 39 of 94)

Consisting of but not necessarily limited to: 1- 8 ft. Folding Leg Table; 7- Chairs, 3- are Swivel; 4- Clothes Lockers, Wooden Construction; 1- EMERSON Microwave; 1- BLACK & DECKER® Toast-R-Oven; 1- T-FAL Avante High Speed Bagel Warmer; 1- BUNN Coffee Maker; 1- MR. COFFEE Coffee Maker; 2- FASTENAL Medi-First, First-Aid Kits.

SHOP FORMAN'S OFFICE

Lot #57 (Sale Order 40 of 94)

Furniture, Fixtures, and Equipment consisting of but not necessarily limited to: 1- Double Pedestal 90° Desk, Wood; 1- Credenza Unit, 4- Lateral Drawers, Wood; 2- Swivel Arm Chairs. With REMAINING CONTENTS OF ROOM (NOTE: LESS LOTS 58, 59 AND 60.) Consisting of but necessarily limited to: 2- Hard Hats, 2- Hearing Protectors, 7- Safety Glasses (Unused), Miscellaneous Parts, Supplies and Consumables; Back Seal Heater Strip; 1- Box 12- (approx.) End Seal Blades, (NOTE: Most/All are marked Used with a Date.) 6- (approx.) Safety Glasses (NEW) 1- Box CERAM Valve.

DELL COMPUTER, SMALL FORM FACTOR

Lot #58 (Sale Order 41 of 94)

DELL OptiPlex 780 WINDOWS 7 Pro, DVD/RW; With WaspTime by BARCODE TECHNOLOGIES, RFID Time Clock; DELL Flat Screen Monitor, Keyboard, Mouse and UPS.

DELL 2 LAPTOP COMPUTERS

Lot #59 (Sale Order 42 of 94)

Latitude E6500 With Microsoft Model 4000 Wireless Keyboard and Mouse; with 1- BROTHER MFC-7340, New Brother TN-360 Toner Cartridge. Inspirion 5150 With TARGUS Model ACP50US Docking Station; 1- DELL Model BATDWOOL Battery Module; 1- Lot Power Cords and Transformers; 1- DELL Laptop Computer Bag. With BROTHER ALL-IN-ONE PRINTER/FAX/COPIER.

SNAP-ON 14.4 VOLT IMPACT WRENCH

Lot #60 (Sale Order 43 of 94)

CT4410A s/n 12201511 3/8 in. Drive, with 2- Battery Packs and Battery Charger. (NOTE: This Unit is NEW/UNUSED, with Plastic Storage/Carrying Case.)

SHOP PARTS STORAGE/TOOL ROOM

Lot #61 (Sale Order 44 of 94)

Consisting of but not necessarily limited to: 3- Shelving Storage Units, Steel, 6- Shelf, 7 ft. high x 4 ft. wide x 24 in. deep (approx.), 1- 6 ft. high x 36 in. x 15 in. deep; 2- Storage Cabinets, Steel, Double Door, 7 ft. high x 4 ft. wide x 24 in. deep (approx.), Each having Miscellaneous Consumable Contents. With HAND AND POWER TOOLS 1- Tool Board, 4 ft. high x 16 ft. long containing Power and Hand Tools (NOTE: There are a lot of Tools on this Board); 1- CRAFTSMAN Dual Wheel Bench Grinder/Buffer, powered by 1/3 hp Electric Motor; 1- Electric Jack Hammer with Bits, in Steel Storage/Carrying Case; 1- Work Bench, 4 ft. x 8 ft. (approx.) Wood; 1- Tool Board, 4 ft. x 8 ft. (approx.) having Miscellaneous Hand Tools consisting of but not necessarily limited to: Safety Harnesses, Grease Guns. With WORK BENCH 4 ft. x 6 ft. (approx.) having 2- Drawers and 1- Plan/Blue-Print Drawer; 1- Pinless 1 in. Air Impact Wrench in Steel Storage/Carrying Case. With PORTABLE WIRE RACK For Vertical and Horizontal Operation, mounted on a Single Axle, having 6- Spools of Electrical Wire (5- are Full Spools and 1- has an estimated 10% remaining). With 2- SNAP-ON Battery Pack Impact Wrenches, 1- 18 volt, 1- 14.4 volt, and Cordless Drill, 18 volt; 2- Socket Sets: 10- 1/2 in. and 3/8 in. Extension; 3- Pipe Wrenches; 3- Mallets; 2- Levels; 2- Squares; Safety Harnesses; 2- Torque Wrenches: 1- 1/2 in. and 1- 3/8 in. Drive.

PRO-MAR LOT 17 5- GAL. PAILS PAINT

Lot #62 (Sale Order 45 of 94)

400 and 200 Consisting of but not necessarily limited to: Interior Latex Paint. With 2- Electric Motors; 6- Sock Dust Wire Frames; 1- Box Adamson 24 in. Belt Conveyor Hoods; 1- TRUE BELT Wedge Anchors; Pallet of 24- Boxes (approx.). With BUTTERFLY VALVE, 8 IN., MANUAL Work Bench/Welding Table, Shop, Heavy Duty, Steel, 34 in. high x 4 ft. x 8 ft. having 1/2 in. Steel Plate Top, H Beam Legs; 1- WILTON Heavy Duty Vise having 8 in. long Jaws.

LOT PARTS CABINET WITH CONTENTS

Lot #63 (Sale Order 46 of 94)

Consisting of but not limited to: 1- Metal Parts Storage and Dispenser Bin, 6 ft. high x 3 ft. wide x 10 in. deep (approx.) with Contents of Hex Bolts and Nuts1/4 in. to 3/4 in., Washers, Flat and Lock. With FASTENAL® METAL PARTS CABINET WITH CONTENTS 4 ft. high (approx.) mounted on 4- Leg Base, having 2- 4- Drawer Parts Cabinets with Contents of Brass Fittings, Air Fittings, (Push to Connect), Sealed Crimp Connections and Other. With 9- BOXES, CARDBOARD WITH CONTENTS Consisting of Hex Bolts, 1 in. x 5 in.; Flat Washers.

MASTER LOCK® ELECTRICAL LOCK-OUT STATION

Lot #64 (Sale Order 47 of 94)

Safety Series Having 12- Locks, Tags and Ties; having 4- additional Locks on Stand-By board located near the Plant Operation Office.

WORK BENCH/WELDING TABLE, SHOP TYPE

Lot #65 (Sale Order 48 of 94)

Heavy Duty, Steel, 34 in. high x 4 ft. x 8 ft. having 1/2 in. Steel Plate Top, H Beam Legs; 1- WILTON Heavy Duty Vise having 8 in. long Jaws.

MILWAUKEE® ABRASIVE CUT-OFF SAW

Lot #66 (Sale Order 49 of 94)

Cat. No. 6176-20 s/n 968F910090395 14 in., powered by Electric Motor.

SAFETY KLEEN™ PARTS WASHER, POWERED

Lot #67 (Sale Order 50 of 94)

Consisting of 20 gal. (approx.) Vertical Solvent Reservoir Tank, Parts Washing Sink with Solvent Recirculating Pump and Hinged Top Cover.

LOT 3 FANS

Lot #68 (Sale Order 51 of 94)

STANLEY INDUSTRIAL EQUIPMENT SALES FORCED AIR FAN 10 amp., Portable. 1- 36 in. powered by Electric Motor mounted on Wood Cable Spool; 1- mounted on Wall Bracket, both with Blade Guards.

VESTIL ORBITAL BOOM LIFT ATTACHMENT

Lot #69 (Sale Order 52 of 94)

LM-OBT-4 s/n S752385 (Mfg. 11/17/2011) 64 in. Boom Reach, 4,000 lb. Capacity; Fork Pockets measure 7 1/2 in. x 2 1/2 in., usable on 24 in. centers, Overall width is 32 in.

LOT 6- total LADDERS, STEP AND EXTENSION

Lot #70 (Sale Order 53 of 94)

Consisting of but not necessarily limited to: 1- LOUISVILLE Model FE3224 24 ft. Fiberglass Extension Ladder; 1- WTI Model 1012 12 ft. Fiberglass Step Ladder. With 2- WTI FIBERGLASS STEP LADDERS (Both Mfg. 12/2010) 1- Ladder Model 1006, 6 ft. tall; 1- Ladder Model 1010 Titan, 10 ft. tall. With 2- WTI FIBERGLASS STEP LADDERS (Mfg. 6/2010 & 7/2010) 1- Ladder Model 1012, 12 ft. tall; and 1- Ladder Model 1008, 8 ft. tall.

LOT MISCELLANEOUS SUPPORT ITEMS AND CONSUMABLES

Lot #71 (Sale Order 54 of 94)

Consisting of but not necessarily limited to: 7- Pieces of Shoring Timbers, Wood, 6 in. x 6 in. x 4 ft. (approx.); 1- Barrel, 55 gal. Plastic, having Contents of Miscellaneous Metal Pieces. 4- Wooden Saw Horses; 1- Pallet, Wood, containing 8- 5 gal. Plastic Buckets, 2- Bags/Sacks of CRYSTEX.

LOT OIL AND GREASE

Lot #72 (Sale Order 55 of 94)

Consisting of but not necessarily limited to: 6- 5 gal. Buckets of MOBILE 600XP200 Gear Oil, 2- 120 lb. Cans of MYSTIK JT6 Hi-Temp Multipurpose Grease; 1- 5 gal. Bucket of LUBRIPLATE Chain and Cable Fluid; 1- 5 gal Bucket of MOBILE SHC 626 Bearing and Gear Oil; 1- 55 gal. Barrel, Metal with Hand Type Oil Pump; 3- 55 gal. Barrels Mobile Grease HTS, 400 lb. each.

LOT PALLET RACK SHELVING

Lot #73 (Sale Order 56 of 94)

Consisting of but not necessarily limited to: 4- Sections Pallet Rack Shelving, Steel Medium to Heavy Duty, Each Section is 10 ft. high x 42 in. deep x 10 ft. 4 in. long (approx.); 3- Sections contain 3- Shelves, 2- Sections contain 2- Shelves, with 2- Unused Cross Bar Units; 1- Section 10 ft. high x 43 in. deep x 12 ft. 7 in. long (approx.) having 3- Shelves Installed.

LOT CONTENTS OF RACK

Lot #74 (Sale Order 57 of 94)

Consisting of but not necessarily limited to: 3- Boxes of DONALDSON TORIT Dust Collector Sacks, Miscellaneous Parts of Belt Drive Safety Guards; 7- (Approx.) Multi-groove V- Belts; 1- Pallet containing 14- Boxes (approx.) of Electrical Conduit Fittings, Lag Bolts, 1- Spool of Electrical Communication Wiring; 1- Partial Spool of CHROMALOX PCN: 382694 Braided Wire; 1- Spool RAYCHEM® RPN: 734921 Wire; 1- Pallet of Dryer Parts, Boxes of Tees; 1- Pallet with 4- Joints of 7 in. dia. x 6 ft. long (approx.) Steel Pipe/Duct Work and Other Miscellaneous Items; 1- Joint 8-8/8 in. OD x 5 ft. long, NATIONAL PVC-1120 160 psi @ 73° F Pipe.

LOT PARTS AND SUPPLIES

Lot #75 (Sale Order 58 of 94)

Consisting of but not necessarily limited to: 16- (approx.) KICE Morris Couplings from 12 in CB OD to 3 in. (approx.), Most are New/Unused; 3- Multi-groove Drive Sheaves, QD Hubs having 12-V-Belt Grooves, Stored in a 6 ft. high x 42 in. x 42 in. Wood Storage Cabinet having 5- Shelves; 1- Box Stainless Steel Worm Screw Clamps, 5 in. OD (approx.) and Smaller; 1- Box Clear Plexiglas Flow Window for Bag House, Cyclonic Separator or other Application.

COLUMBUS MCKINNON HURRICANE 360° HAND CHAIN HOIST

Lot #77 (Sale Order 59 of 94)

1- ton (1,000 kg), with Trolley.

COLEMAN PORTABLE PRESSURE WASHER UNIT

Lot #78 (Sale Order 60 of 94)

PowerMate 2750 2750 psi, 2.5 gpm, powered by HONDA 6.0 hp Gas Engine, with Wash Wand.

METAL CRAFT OXYGEN / ACETELYNE WELDING / CUTTING SET

Lot #79 (Sale Order 61 of 94)

With 2- METAL CRAFT Pressure Regulators, Hoses, 2- Torches, Goggles, 2- Strikers, mounted on Single Axle Cart. (NOTE: The Gas Bottles are the Property of the Industrial Gas Supplier.)

PORTABLE LIGHT TOWER

Lot #80 (Sale Order 62 of 94)

Consisting of but not necessarily limited to: 1- Portable Light Tower, Tripod type having 2- Halogen Flood Light Fixtures, and Power Cord 25 ft. long (approx.).

SHOP-VAC® WET/DRY VACUUM

Lot #81 (Sale Order 63 of 94)

10 gal.US, 4 hp Electric Motor with Hose. With HOMEBASIX FORCED AIR ELECTRIC RESISTANCE HEATER.

WHEEL BARROW

Lot #82 (Sale Order 64 of 94)

1.5 cu. yd. capacity (approx.), Steel Bed, 1- Center Pneumatic Wheel.

LOT DOLLY, MATERIAL MOVING

Lot #83 (Sale Order 65 of 94)

With Miscellaneous Contents consisting of but not limited to: 1- 45 in. x 45 in. x 1 ft. high Dolly having 4- Wheels, Heavy Duty, Wood with Wood Shoring Blocks, and Miscellaneous Metal, Parts, Components, Link Chain, KICE Sleeve.

LOT 7 SUPER SACKS

Lot #84 (Sale Order 66 of 94)

On Pallets containing Reclaimed Very Fine Wood Fiber American Wood Fibers "10 Mesh Oakwood Flour"; 1- Super Sack containing Wood Pellets.

LOT 950 (approx.) PALLETS, WOOD, MATERIAL HANDLING

Lot #85 (Sale Order 67 of 94)

48 in. x 40 in.

FARM BOY GALVANIZED, CORRUGATED STEEL SILO

Lot #86 (Sale Order 68 of 94)

30- ton capacity, mounted on 6- Legs, having 5- Side mounted Sight Material Level Gauges. (NOTE: The Unit is fully erected and apparently ready for operation EXCEPT both Infeed and Outflow Piping are disconnected, the Hopper Discharge is not connected/open and the electrical, while it is physically connected by conduit to the Unit, it is apparently not operational.)

DAYTON AND GATES LOT DRIVE BELTS, V-TYPE

Lot #87 (Sale Order 69 of 94)

53- (approx.) total ranging in Size from 5Vx 1120 Super HC®, BX98, BX94, 5VX 900, 5V8 800, B64 to 3VX 570 and Other Sizes; 1- POWER DRIVE Belt Rack, wall mounted, 18 ft. (approx.) length.

LOT MISCELLANEOUS PARTS, SUPPLIES AND CONSUMABLES

Lot #88 (Sale Order 70 of 94)

Consisting of but not necessarily limited to: 2- Pieces LEXAN Plexiglas; 1- Pallet and other area of Machinery Parts consisting of Shafts, Locking Rings, Plates, and Specialize Machine Fixtures.

LEESON 3 ELECTRIC MOTORS

Lot #89 (Sale Order 71 of 94)

1- 5 hp (approx.), 2- WATT SAVER, 2 hp, Unused/New.

4 BOXES AIR HANDLER FILTERS

Lot #90 (Sale Order 72 of 94)

2- Boxes FLANDERS PRECISION AIRE EZ II, 10 x 20 x 2; 2- Boxes AIR HANDLER Standard Capacity, Pleated, 20 x 30 x 2 (2GGT6 & 2HYD5). All New/Unused Condition.

LOT PIPING AND DUCTWORK

Lot #91 (Sale Order 73 of 94)

Carbon and Stainless Steel, consisting of but not necessarily limited to: 2- Joints 17 in. dia. x 10 ft. long (approx.) Stainless Steel; 4- Joints 20 in. dia. x 10 ft. long (approx.) Carbon Steel, Painted; 1- Joint 20 in. dia. x 55 ft. long (approx.) Carbon Steel, Painted; 1- Joint 10 in. dia. x 42 ft. long (approx.) Carbon Steel, Painted; 4- Joints CANTEX Sch 40, RIDGID PVC, Non-Metallic Conduit, Above Ground and Under Ground; 3- Joints 12 in dia. x 10 ft. long (approx.) Stainless Steel; 2- Joints 5 in. dia. x 20 ft. long (approx.) Carbon Steel, Painted; 3- Joints 5 in. dia. x 15 ft. long (approx.) Carbon Steel, Painted; 6- Pieces 6 to 7 in dia. (approx.) Long Sweep 45° Ells; 10 Pieces 5 in. dia. Long Sweep 45° Ells; and Other Related Items.

LOT DESK AND PACKAGING HAND TOOLS AND EQUIPMENT

Lot #92 (Sale Order 74 of 94)

Consisting of but not necessarily limited to: 1- COLE (or Similar) Double Pedestal Metal Desk, 4- ARROW Model T50 Series Manual Staple Guns, 3- STANLEY Model TRA 700 Series Heavy Duty, Hammer Type Staple Guns, 5- Boxes of T50 Staples; 1- SIGNODE Portable Strapping Unit consisting of Reel Support and Dispenser Cart; 1- Reel of Steel Strapping; (NOTE: Estimated to be a mostly full Reel.) Tensioning tool Crimping Tool; A supply of Crimping Clips; 4- Rolls of U-LINE Shrink Wrap, Plastic, Hand Dispensed Type.

LOT RECEPTION AREA

Lot #96 (Sale Order 75 of 94)

Consisting of but not necessarily limited to: 1- Horseshoe Shaped Work Center having 1- Double Pedestal Desk, Wood; 1- Left hand Computer Return, Wood; 1- 2- Drawer Lateral File Cabinet. Wood, 1- Hutch, 6 ft. long (approx.), Wood; 1- Chair, Swivel, Arm; 1- Bookcase, Wood, 6 ft. high x 3 ft. wide (approx.); 1- Coffee Table, and 1- Side Table, Wrought Iron Bases, Wood Top with Glass Cover over Wood Pellets; 2- Chairs, Side, Straight, Arm, 1- is Wood and 1- is Metal; 2- Flower Arrangements, 1- Orchid in Ceramic Pot, 1- Ivy Vines in Metal Pot, Artificial-Plastic.

LOT CONFERENCE ROOM

Lot #97 (Sale Order 76 of 94)

Consisting of but not necessarily limited to: 1- Conference Table, 7 ft. 6 in. long x 42 in. wide (approx.), Wood, Rounded on both Ends, Mounted on Single Center Cylindrical Pedestal; 6- Chairs, Swivel, Arm; 1- QUARTET Dry Marker board, 3 ft. x 4 ft. (approx.).

LOT MAIN FLOOR OFFICE

Lot #98 (Sale Order 77 of 94)

Consisting of but not necessarily limited to: 1- Single Pedestal Wood Desk with 90° Curved Corner Piece; 1- Computer Right Return with Hutch, Wood; 3- Storage Cabinets/Lateral File Units, Wood, 7 ft. high x 3 ft. wide (approx.), 1- Storage Cabinet, Wood; 1- Bookcase, 4 ft. high x 3 ft. wide (approx.) having 3- Shelves; 3- Chairs: 1- is Executive Swivel; 2- are Stacking, Side, Metal; 1- Chair Mat; 1- Waste Basket; 1- QUATRO Dry Marker Illustration Board, 3 ft. x 4 ft. (approx.).

DELL LAPTOP COMPUTER

Lot #99 (Sale Order 78 of 94)

Latitude E6500 With WINDOWS 7; DELL Docking Station and Flat Screen Monitor; LOGITECH MX-3200 Wireless Keyboard and Mouse.

LOT MAIN FLOOR OFFICE

Lot #100 (Sale Order 79 of 94)

Consisting of but not necessarily limited to: 1- Single Pedestal Wood Desk with 90° Curved Corner Piece; 1- Computer Right Return with Hutch, Wood; 2- Storage Cabinets/Lateral File Units, Wood, 7 ft. high x 3 ft. wide (approx.), 1- Storage Cabinet, Wood, 2- Book Cases, 4- ft. high x 3 ft. wide (approx.) Each having 3- Shelves; 1- Executive Swivel Chair; 1- Side, Arm, Chair, Metal; 1- Chair Mat; 1- Waste Basket; 1- QUATRO Dry Marker Illustration Board, 3 ft. x 4 ft. (approx.); STAPLES Calculator SPL-240, 8- Digit, 2- Way Power.

HEWLETT PACKARD LAPTOP WITH DOCKING STATION

Lot #101 (Sale Order 80 of 94)

Elite Book 8740W With DELL Flat Screen Monitor; LOGITECH MX-3200 Wireless Keyboard and Mouse; 1- APC UPS.

LOT PRESIDENT'S OFFICE

Lot #102 (Sale Order 81 of 94)

Consisting of but not necessarily limited to: 1- Horseshoe Shaped Work Center having 1- Double Pedestal Desk, Wood; 1- Left-hand Computer Return, Wood; 1- 2- Drawer Lateral File Cabinet. Wood, 1- Hutch, 6 ft. long (approx.), Wood; 1- Chair, Swivel, Arm; 1- Bookcase, Wood, 6 ft. high x 3 ft. wide (approx.); 1- Table, Side, 42 in. dia. (approx.) Round, Single Pedestal Wood; 1- File Cabinet, 3- Drawer, 1- is Hanging File Drawer, 3- Chairs: 1- is High Back Executive Swivel, 2- are upholstered Swivel, 1- Bookcase, 7 ft. high x 3 ft. wide having 5- Shelves, 1- Paper Shredder, 1- MINKA AIRE Oscillating Electric Fan.

LOT SECOND FLOOR OFFICE

Lot #103 (Sale Order 82 of 94)

Consisting of but not necessarily limited to: 1- Workstation having Desk and Left Hand Computer Return with Hutch; 1- Chair Swivel, Executive; 1- Chair Mat; 1- STAPLES Paper Shredder; 1- Waste Paper Basket; 1- File Cabinet, 2- Drawer Later, Wood; 1- Bookcase, 6 ft. high x 42 in. wide (approx.), 5- Shelves, Wood; 1- Chair, Swivel, Executive;, 1- Chair Mat; 1- Waste Basket; 1- Wall Map of Eastern United States; 1- QUARTET Dry Marker Board, 3 ft. x 4 ft. (approx.).

LOT SECOND FLOOR OFFICE

Lot #104 (Sale Order 83 of 94)

Consisting of but not necessarily limited to: 1- Workstation having Desk and Left Hand Computer Return with Hutch; 1- Chair Swivel, Executive; 1- Chair Mat; 1- STAPLES Paper Shredder; 1- Waste Paper Basket.

LOT COMPUTER EQUIPMENT

Lot #105 (Sale Order 84 of 94)

DELL Latitude E6500 Laptop Computer, with Docking Station, 3- Keyboards: 1- is a DELL and 2- are LOGITECH; 1- TARGUS Laptop Computer Bag; 1- HEWLETT PACKARD DeskJet 1220C Printer; 1- MCAFEE®™ Firewall Unit; 1- BLACK BOX NETWORK SERVER MC200A Fax Receiver®, LINKSYS® 16- Port Gigabit Switch with Webview.

LOT SECOND FLOOR OFFICE

Lot #106 (Sale Order 85 of 94)

Consisting of but not necessarily limited to: 1- Workstation having Desk and Left Hand Computer Return with Hutch; 1- Chair Swivel, Executive; 1- Chair Mat.

DELL MID TOWER CASE COMPUTER

Lot #107 (Sale Order 86 of 94)

Precision T3400 With MICROSOFT XP Operating Software; 2- DELL Flat Screen Monitors, MICROSOFT Keyboard, Wireless Mouse, Wired Mouse.

LOT PRODUCTION ROOM

Lot #108 (Sale Order 87 of 94)

Consisting of but not necessarily limited to: 1- Horseshoe Type Work Station having 1- Double Pedestal Desk, Wood, 1- Left Hand Computer Return, Wood; 1- 2- Drawer lateral File Cabinet, Wood, 1- Hutch, 6 ft. long (approx.), Wood; 2- Chairs, Executive Swivel, Comfort.

MR. COFFEE ELECTRIC COFFEE MAKER

Lot #109 (Sale Order 88 of 94)

12-Cup; 1- Drying Rack, Wood.

LOT BREAK ROOM EQUIPMENT

Lot #110 (Sale Order 89 of 94)

1- HAIER 3 cu. ft. Under-Counter Refrigerator; CONTINENTAL Coffee Maker, Electric, 12- Cup; 1- HAMILTON BEACH Bagel Toaster, Electric.

MOTOROLA LOT 6 ON-SITE 2- WAY BUSINESS RADIOS

Lot #111 (Sale Order 90 of 94)

RDX Series™ RDU 4100 With 6- Station Charger, 5- Microphones; 10 Channel, 4/5 watt. (NOTE: The Units are physically located in lot 61. The Boxes (empty) for the Units are located in the Hallway of the 1st Floor of the Administration Offices. Six Boxes but only 5 radios have been located.)

BROTHER WIRELESS LASER PRINTER

Lot #112 (Sale Order 91 of 94)

HL-2270DW s/n U62674KOJ267669 With BROTHER Model DR-360 Drum Unit, 2- Reams of 8-1/2 in. x 11 in. Paper, 1- OEM Shipping Box; 1- CONTINENTAL™ Electric Coffee Maker; 1- HAMILTON BEACH® 2- Slice Toaster.

HEWLETT PACKARD FAX

Lot #113 (Sale Order 92 of 94)

HP 1040, Regulatory Model SDGOB-0403-01 s/n CN69UA180T And 2- 3 Hole Punches: 1- ACCO Heavy Duty and 1- STAPLES.

LOT JANITORIAL EQUIPMENT

Lot #114 (Sale Order 93 of 94)

Consisting of but not necessarily limited to: 1- EUREKA Whirlwind® Plus Vertical Vacuum Cleaner, HEPA Filter, 12 amps Max Power; 1- RUBBERMAID Reveal Floor Mop having Liquid Reservoir; 1- RUBBERMAID Portable 3-4 gal. (approx.) Mop Pail with Mop Wringer Attachment, 1- Mop, 1- Dust Pan with 'Counter Duster'.

NORTEL/MOTOROLA PHONE SYSTEM

Lot #115 (Sale Order 94 of 94)

2- MOTOROLA 2-way UHF 1W business radios with built-in digital 2.4 GHz cordless phone capability. Radio features include 4 channels, 56 UHF selectable frequencies, and cloning. Cordless phone works with multiline phone systems - transfer calls, pick up specific lines, page, etc. Phone base plugs into phone system analog port and works as an extension. Features caller ID with visual call waiting, speakerphone, a programmable phone book, and more. Outbound call lock programmability. Compatible with CLS, XTN, GT, and M-series radios. Includes lithium ion battery, drop-in charger, and phone base. Handset is 5.3" x 2.1" x 1.3", weight 7 oz.


AUCTION: 35,000 Ton/Year Wood Pellet Plant
Industrial Machinery & Equipment > Maas Companies Inc > AUCTION: 35,000 Ton/Year Wood Pellet Plant
AUCTION: 35,000 Ton/Year Wood Pellet Plant
by Maas Companies Inc Event Begins: Wednesday, November 12, 11:00 AM Eastern Event Ends: Tuesday, November 18, 11:00 AM Eastern Like New $7 Million Dollar 35,000 +/- Ton/Year Wood Pellet Plant. 43,750 Sq. Ft. Building on 8.59 +/- Acres. Real Estate & Equipment Selling Separate or as Entirety.