|
Sale is Subject to Owner Confirmation. |
|
OIL UNLOADING/LOADOUT STATION Lot #10 (Sale Order 1 of 69) With UNLOADING STATION Consisting of but not necessarily limited to: 1- ITT GOULDS Centrifugal Pump, 2-1/2 in. x 2-1/2 in. (approx.) Stainless Steel, 7-1/2 hp Electric Motor, with Piping and Valves, 2- 4 in. OD x 20 long (est.) Hoses Each having QC Couplings. With BIODIESEL LOADOUT STATION Consisting of but not necessarily limited to: 1- TOTAL CONTROL SYSTEMS Model 700-305P2BX Pump s/n 801046 (Mfg. 2/8/2007); 1- ARO 2 in. x 2 in. (approx.) Diaphragm Pump, Air Operated. With VEEDER-ROOT METER REGISTER 0788700-089 603358208 Model 7889 Meter Preset and Form Number 078810-001 Ticket Printer. With TUTHILL TRANSFER SYSTEM ZEROING METER Full-Rite Series 800C With Electric Powered Pump, GOODYEAR 3/4 in. (approx.) Hose with Dispenser Nozzle. With 75 ft. (approx.) Yellow Process Piping Leading to Pump 18. Does Not Include Shut-off at Pump. With 85 ft. (approx.) Orange Process Piping Leading to Pump 16. Does Not Include Shut-off at Pump. With 15 ft. (approx) Green Process Piping Leading to Shut-off. Shut-off is Part of Lot 13 which Connects to Lot 11. With CEILING MOUNT TRUCK LOADOUT PIPE/ FLEXIBLE HOSE/FITTING 1- Top Load out Point consisting of but not necessarily limited to: Piping, Carbon Steel, 3½ in. x 40 ft. l (both dimensions are estimated) Running from floor level near the metering area, vertically to the ceiling and Suspended from a Clear Span Structural Steel Support Arch to the Center (approx.) of the Building having a 3½ in. Ball Valve, Manually operated. The Top End is equipped with a 3½ in. od x 12 ft. l (both dimensions are estimated) Steel Wire Enforced Flexible Hose Attached with a 3½ in. (est.) Ball Valve, Manually Operated and a Quick Coupling End Fitting with Cap. With WORK STAND, WOOD Having 12- (approx.) QC Fittings, Pipe Nipples and Related Parts; 1- 4 in. dia. (approx.) Tanker Trailer QC fitting with Vapor Captive Hose Connector. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
STORAGE TANK, RAW OIL Lot #11 (Sale Order 2 of 69) Tank No. A: 5,375 gal. capacity, Horizontal Stainless Steel, 101 in. dia. x 155 in.(approx.) long, Dished at Both Ends, Equipped with 20 in. dia. (approx.) Flanged Clean-Out Hatch located on the Bottom End. Front Mount Nibco Shut-off Valve. Tank Only-No Piping. Co. No. VA.
|
|
|
STORAGE TANK, RAW OIL Lot #12 (Sale Order 3 of 69) Tank No. B: 4,073 gal. capacity, Horizontal Stainless Steel, 8 ft. dia. x 11 ft. (130 in.) (approx.) long, Dished at both Ends, with Sight Gauge. Front Mount Nibco Shut-off Valve. Tank Only-No Piping. Co. No. VB. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
ITT GOULDS 2 TRANSFER PUMPS Lot #13 (Sale Order 4 of 69) 1- is 2-1/2 in. x 2 in. (est.) and 1- is 1 in. x 1 in. (est.) Centrifugal, Stainless Steel, Each independently powered by an Electric Motor, with Green Horizontal Tank Interconnect Piping to Tanks 11 & 12. Does Not Include any Vertical Piping from Pumps. (NOTE: Some Piping is Heat Traced.)
|
|
|
TANK, STORAGE, GLYCERIN Lot #14 (Sale Order 5 of 69) 3,481 gal. capacity, Horizontal, Stainless Steel, 6 ft. 8 in. x 80 in. dia., 138 in. long Seam to Seam (approx.), Domed at both Ends, having Sight Gage and TEL-TRU Thermometer, Top/Bottom Front Mount Nibco Shut-off Valves. Tank Only-No Piping. Co. No. GA. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
TANK STORAGE, BIODIESEL Lot #15 (Sale Order 6 of 69) 3,144 gal. capacity, Horizontal, Stainless Steel, 78 in. dia. x 152 in. long, Dished at both Ends. Front Mount Nibco Shut-off Valve. Tank Only-No Piping. Co. No. BA. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
ITT GOULDS 2 TRANSFER PUMPS Lot #16 (Sale Order 7 of 69) Series SSH 1- is 2-1/2 in. x 3 - 8 in. (est.) and 1- is 1 in. x 1 in. (est.) Centrifugal, Stainless Steel, Each independently powered by an Electric Motor. With Orange Horizontal Tank Interconnect Piping to Tanks 14 & 23. Does Not Include Shut off Valves at Tanks 14 & 23. Includes both Shut-off Valves Located on Top of Each Pump. Does Not Include the Long Orange Length of Pipe after the 90 Degree Top Mounted Shut-off Valve to Load/Load-Out Area which is Lot 10.
|
|
|
TANK STORAGE, BIODIESEL Lot #17 (Sale Order 8 of 69) 5,375 gal. capacity, Horizontal, Stainless Steel, 101 in. dia. x 155 in. long Dished on both Ends. Top/Bottom Front Mount Nibco Shut-off Valves. Tank Only-No Piping. Co. No. BB. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
ITT GOULDS 2 TRANSFER PUMPS Lot #18 (Sale Order 9 of 69) Series SSH-C 1- is 2-1/2 in. x 2 in. (est.) and 1- is 1 in. x 1 in. (est.) Centrifugal, Stainless Steel, Each independently powered by an Electric Motor. With Yellow Horizontal Tank Interconnect Piping to Tanks 15 & 17. Does Not Include Shut off Valves at Tanks 15 & 17. Includes both Shut-off Valves Located on Top of Each Pump. Does Not Include the Long Yellow Length of Pipe after the 90 Degree Top Mounted Shut-off Valve to Load/Load-Out Area which is Lot 10. (NOTE: Some Piping is Heat Traced).
|
|
|
MUELLER TANK, BIODIESEL Lot #19 (Sale Order 10 of 69) 2,250 gal. capacity, Vertical, 78 in. dia. x 103 in. high, Domed at both Ends, Stainless Steel, having 20 in dia. (est.) Domed and Hinged Clean-Out Hatch with Dog Screw Down Secure Bolts, with Top Mounted Agitator with Gearbox and Powered by Electric Motor, mounted on 4- 36 in. high (est.) Pipe Legs, with 2- Upper and 1- Lower Sight Gages, TEL-TRU Thermometer. Top/Bottom Mount Shut-off Valves are Included. Tank Only-No Piping. Co. No. M. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
WALKER TANK, BIODIESEL Lot #20 (Sale Order 11 of 69) R 868 4750 (Mfg. 04/83) 2,142 gal. capacity, Vertical, 94 in. dia. x 67 in. tall, Domed at both Ends, Stainless Steel, having Top mounted Access Hatch, with Top Mounted Agitator with Gearbox and Powered by Electric Motor, mounted on 4- 57 in. high (approx.) Pipe Legs. Bottom Mount Shut-off Valve. Tank Only-No Piping. Co. No. W. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
2- ITT GOULDS 1-ARGO LOT 3 PUMPS PUMPS Lot #21 (Sale Order 12 of 69) Series SSH-C Consisting of 2- ITT GOULDS Series SSH-C Centrifugal Pumps, Stainless Steel, powered by Electric Motor, 1- Gear Type Pump powered by Electric Motor and 1-ARGO Diaphragm Pump, Model 666200 344C, S/N E8319 330 Max Working Pressure 120psi 8 BAR, Air powered, with necessary Piping and Valves. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
TANK, FILTER RETURN, BIODIESEL Lot #22 (Sale Order 13 of 69) 2,744 capacity, Vertical, 8 ft. dia. x 8 ft. tall (approx.) Domed at Top, Stainless Steel, with Conical Bottom, Agitator Mixer powered by Top Mounted Electric Motor, Tank mounted on 6- 43 in. high Pipe Legs with Centrifugal Pump powered by Electric Motor. Includes Shut-offs and Piping Immediately Under Tank. Co. No. 5B. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
TANK, STORAGE, GLYCERIN Lot #23 (Sale Order 14 of 69) 4,520 gal. capacity, Vertical, 101 in. dia. x 125 in. tall (approx.), Stainless Steel, with Agitator powered by Top Mounted Electric Motor, Tank mounted on 4- 54 in. high Iron Legs. Includes Bottom Mount Elbow/Shut-off Valve. Tank Only, No Piping. Co. No. GB. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
GEORGE MARKER & SONS 2 TANKS, ION EXCHANGE Lot #24 (Sale Order 15 of 69) Nat. Bd. Nos. 194 and 193 (Both Mfg. 1991) 750 gal. capacity, Vertical, 4 ft. dia., 8 ft. Seam to Seam, Domed on Both Ends, Carbon Steel, Each contains PD206 Ion Exchange Beads, Both have 2- 18 in. dia. (est.) Flanged Clean-Out Hatches, 1- at the Top, and 1- at the Bottom, Both Tanks are Unitized and Mounted on a Fabricated Steel Base 19 in. high x 7 ft. wide x 8 ft. 10 in. long (approx.). Includes Immediate Piping and Shut-off Valves Above and Below Skid. Unit Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping Feeding Surrounding the Skid. With ITT GOULDS PUMP Series NPE 1 x 1-1/4 -6, Stainless Steel, powered by Electric Motor. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
STAINLESS FABRICATION, INC. 3 TANKS, REACTOR/OIL MIXING Lot #25 (Sale Order 16 of 69) 2259-1 (Mfg. 1999); s/n 2259-2 (Mfg. 1999); s/n 2259-3 (Mfg. 1999) 1,733 gal. capacity each, Vertical, Stainless Steel, 60 in. dia. x 140 in. tall, Dished Top, and Shallow Cone Bottom, MAWP, +10 in. -2 in. W. C. psi, Co. No. 13; with 24 in. dia. (approx.) Flanged Clean-Out Hatch, TEL TRU Thermometer, 2- Upper and 1- Bottom positioned Sight Gauges, Each having Agitator Mixer powered by Electric Motor, Top Mounted, Each mounted on 4- 38 in. high (approx.) Pipe Legs. Includes Interconnect-Piping and Shut-off Valves Above and Below the 3- Tanks. Tanks Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping/Tanks. Co. No. 13, Co. No. 14 and Co. No. 15. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
STAR POLYPRESS FILTER PRESS SQUARE Lot #26 (Sale Order 17 of 69) 10 to 40 plates Capability, 48 in. high x 29 wide x 78 in. long (approx.) OAD, to use 25 in. x 25 in., 630 mm, Filter Leaves, Hydraulically Operated; with 2- Cartridge Type Filters, 1- is CUNO Incorporated Model 5DC3, Stainless Steel, 1- is a Carbon Steel Unit, 1- Pallet containing Filter Leaves, for Plant Filter Press, Used. (NOTE: This Pallet is stored/located in the BIOWATZ Building.) Assorted New Filter Socks for Cartridge Filters. Unit Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
POTTER & RAFIELD TANK, CENTRIFUGE RETURN Lot #27 (Sale Order 18 of 69) 3,175 gal. capacity, Vertical, Stainless Steel, 8 ft. dia. x 8 ft. + (approx.) Flat top and Shallow conical Bottom, mounted on 4-36 in high I-Beam Steel Legs, 4- 2-1/2 in. (approx.) Stacked Outlets, Each with Brass Ball Valve, 1- is 4-1/2 in. x 15 ft. long (est.) Flexible Rubber Hose having QD End Fittings. Co. No. A.
|
|
|
POTTER & RAFIELD TANK, CENTRIFUGE RETURN Lot #28 (Sale Order 19 of 69) 6420V12 - - 3,750 gal. capacity, Vertical, Stainless Steel, Style DV, 10 ft. dia. x 8 ft. tall Seam to Seam, Domed Top and bottom, with 18 in. x 21 in. Oval Bottom Mounted Clean-Out hatch, mounted on 7- 41 in. (approx.) high Pipe Legs; with Side mounted Agitator Gearbox and Drive Sheave. Co. No. B.
|
|
|
WESTFALIA SEPARATOR AG CENTRIFUGE, SOLID DISK Lot #29 (Sale Order 20 of 69) Type OTA14-00-066 1696 200 (Mfg. 1989) 3,000 L/hr., 1.1 g/c.c. Solids, powered by Electric Motor, with Tool Board, Vertically Mounted having 8- (approx.) Specialized Custom Break-Down Tools, 2- of which are Spanner Wrenches, Start/Stop Switches, Air Pressure Trap and Gauge, Necessary Plumbing, Valves and Fittings, All Unitized and Mounted on a 4 ft. wide x 67 in. long Fabricated Steel Skid, Solid Wall with Double Pump, Bowl Lifter. Unit Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
LOT 2 VACUUM RECOVERY BIODIESEL TANKS Lot #30 (Sale Order 21 of 69) With TANK B, VACUUM RECOVERY, BIODIESEL Type BSAP 857648 250 gal capacity, 30 in. dia. x 64 in. high x 94 in. long (approx.) Seam to Seam, Hemispherical Top and bottom, having 3- Sight Level Gages, .148 Head and .174 Shell Thickness, with W, U and UL Stamps, mounted on 3-9 ft. tall Angle Iron Steel Legs, Co. No. A (E1); With TANK A, VACUUM RECOVERY, BIODIESEL Type BSAP 2SG075125 250 gal capacity, 4 in. dia. x 64 in. high x 94 in. long (approx.) Seam to Seam, Hemispherical Top and bottom, having 3- Sight Level Gages,.148 Head and .174 Shell thickness, with W, U and UL Stamps, mounted on 3-9 ft. tall Angle Iron Steel Legs, Co. No. B (E2); with 2- 1-3/4 in. Pumps, 1- is Gear Type, 1- is Vane, Each independently powered by Electric Motor. Includes Interconnect-Piping and Shut-off Valves Above and Below the 2- Tanks. Tanks Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
TUTHILL 2 TRANSFER PUMPS Lot #31 (Sale Order 22 of 69) 2- 1-3/4 in. Pumps, 1- is Gear Type, 1- is Vane, Each Independently Powered by RELIANCE ELECTRIC Duty Master 2hp Electric Motor. Includes Piping to Lot 30 Tanks.
|
|
|
WILL-FLOW CORP. TANK, STORAGE, RECYCLED VEGETABLE OIL, VERTICAL Lot #32 (Sale Order 23 of 69) 44797-3 1,650 gal. capacity, 78 in. dia. x 82 in. high (approx.), Stainless Steel, Flat Bottom and Top, Top is equipped with a Hinged Opening Segment, mounted on 5- 30 in high (approx.) Pipe Legs. Tank Only, No Piping. Co. No. UA.
|
|
|
WILL-FLOW CORP. TANK, STORAGE, RECYCLED VEGETABLE OIL, VERTICAL Lot #33 (Sale Order 24 of 69) Nat. Bd. No. 4986, Mfg. s/n 44797-1 (Mfg. 1984) 1,650 gal. capacity, 78 in. dia. x 82 in. high (approx.), Stainless Steel, Flat Bottom and Top, Top is equipped with a Hinged Opening Segment, mounted on 5- 30 in high (approx.) Pipe Legs. Tank Only, No Piping. Co. No. UB.
|
|
|
ITT GOULDS 2 CENTRIFUGAL PUMPS Lot #34 (Sale Order 25 of 69) G&L Series SSH 2 in. x 2 ½ - 6 in. (approx.), 5 13/16 in. Impeller, Stainless Steel, each individually powered by Electric Motor; with necessary Piping and Valves to connect 3- RVO Tanks.
|
|
|
BELDING TANK TECHNOLOGIES TANK, STORAGE, WASTE WATER STORAGE Lot #35 (Sale Order 26 of 69) C-CFV-7-2306 20675 (Mfg. 03/1998) 2,306 gal. capacity, Flat Bottom, Dished Top, Heat Coil installed in the Interior with HOTFOIL, INC. Heater Control Box, 8 ft. dia. x 7 ft. high Seam to Seam (approx.). Front Mount Shut-off Valve. Tank Only, No Piping. Co. No. D.
|
|
|
TANK, STORAGE, VERTICAL FIBERGLASS Lot #36 (Sale Order 27 of 69) 1,000 gal. capacity (est.), 6 ft. dia. x 7 ft. high (approx.) Flat Bottom and Open Top. (NOTE: Top is fitted with a Plywood Top with Hinged Segment Opening.) Tank Only, No Piping.
|
|
|
TANK, STORAGE, METHANOL RECEIVING, VERTICAL Lot #37 (Sale Order 28 of 69) 8,270 gal. capacity, Stainless Steel, 96 in. dia. x 264 in. tall (approx.), Flat Bottom and Top, with a 24 in. dia. Bottom Positioned, Flanged Clean-Out Access. Does Not Include Stainless Shut-off Valve Leading to Lot 38. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
TANK, MIXING, METHANOL (MEOH), VERTICAL Lot #38 (Sale Order 29 of 69) 496 gal. capacity, 52 in. dia. x 4 ft. Seam to Seam, having Flat Top and Conical Bottom, Stainless Steel, Sight Gauge, Top Mounted Dry Ingredient Adding Port, Top Mounted Agitator/Mixer, powered by Electric Motor, mounted on 4- Angle Iron Steel Legs; with ITT GOULDS Stainless Steel Centrifugal Pump; with necessary Piping, Fittings and Valves to connect the Function Units, Most are Stainless Steel; with Maintenance Inspection and Work Platform having Stairs, Stainless Steel Hand-Railings and Roof, with Fiberglass, non-Skid Steps. Does Not Include any Underground Wiring or Piping to Process Building. Co. No. MM. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
VACUUM UNIT Lot #39 (Sale Order 30 of 69) Consisting of but not necessarily limited to: 1- DEKKER VACUUM PUMP powered by MARATHON 3 hp Electric Motor, 1-ITT GOULDS Transfer Pump Series SSH with MARATHON 3 hp Electric Motor, Both Mounted and Unitized on a Fabricated Steel Frame; with QUALITY STEEL CORPORATION Receiver Tank, s/n 833715, (Mfg. 2005), 200 gal. (est.) capacity, 22 in dia. x 54 in. Seam to Seam long (approx.), Domed on both Ends, with Sight Gage.
|
|
|
TEMPTEK™ CHILLER Lot #40 (Sale Order 31 of 69) PTS-1000-3P-B 46516- 6 9 7040, (Mfg. 6/18/1999) With 3- ITT GOULDS, Centrifugal Pump, Stainless Steel, powered by BALDOR 1.5 hp Electric Motor; with TRANE® Type 4326-1687-4B Forced Air Heat Exchanger, s/n L78B11095, Model Number CGAA-3001-MB, 3- Updraft Fans, 1- Plate Type Heat Exchanger. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
CATWALK, WORK PLATFORM & STAIRWAY Lot #41 (Sale Order 32 of 69) Consisting of but not necessarily limited to: 1- CATWALK, Fabricated Steel and Aluminum, 8 ft. h x 30 in. w x 25 ft. l (all dimensions are estimated) having Aluminum, Solid Bridge Decking, Stairs are equipped with Fiberglass Bar Grating Stair Treads with Stainless Steel Safety Hand Railings. Catwalk and Work Platform Safety Railing consisting of: 1- 2- Bar, ‘Low Side’ Safety Railing constructed with 1- Stainless Steel Tubing Top Railing and 1- Square Slotted Tubing, Galvanized, Intermediate Railing. And, 1- 3- Bar, ‘High Side’ Safety Railing constructed with 2- Stainless Steel Railings – 1- is the Top Railing and 1- is the Intermediate Railing, and 1- Square Slotted Tubing, Galvanized Bottom Railing. (Note: the Catwalk / Work Platform has a 30 in. w x 5 ft. l (est.) Elevated Extension Area. Total overall length is estimated to be 30 ft.)
|
|
|
WEIL-MCLAIN BOILER, COMMERCIAL GAS/OIL Lot #43 (Sale Order 33 of 69) 780 Series 1 N/A 753 MBH Gross Output, 565 MBH Steam Output, Oil Fired, Forced Drafting Burner. ITT GOULDS Centrifugal Pump, Stainless Steel, Powered by a 1.5 hp FRANKLIN Electric Motor, AMTROL Expansion Tanks, See Through In-Line Filter. Unit Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping and Equipment. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
FULTON THERMAL FLUID HEATER, COIL DESIGN Lot #44 (Sale Order 34 of 69) FT-0080C Nat. Bd. No. 5777, Mfg. s/n 4278C (Mfg. 2008) 150 psi WP, 67 ft.² Heating Surface with 800,000 btu/hr., Max Temperature 650° F, Light Oil Fired Burner Blower, 50 gal./hr. Circulation Pump and Electrical Control Panel, Mounted and Unitized on a Fabricated Steel Skid. With TOWER Fabricated Steel, 12 ft. high x 8 ft. wide x 3 ft. deep (est.), with Expansion Tank, Thermal Over-Flow Tank, Piping and Valves with Electrical Power and Unit Control Panel, Wall Mounted. Unit Shall Be Disconnected at the Nearest Mechanical Breakpoints to Associated Process Piping and Equipment. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
AIR COMPRESSOR SALES, INC. AIR COMPRESSOR Lot #45 (Sale Order 35 of 69) EC K15 462 928118 (Mfg. 2001) Powered by BALDOR 15 hp Electric Motor, Unitized and Mounted on a 120 gal. (est.) Horizontal Air Receiver Tank.
|
|
|
EG&G ROTRON REGENERATIVE BLOWER Lot #46 (Sale Order 36 of 69) DR707D89MX Powered by 5 hp Electric Motor.
|
|
|
WESTWARD® AIR COMPRESSOR Lot #47 (Sale Order 37 of 69) 4ME96 Powered by DAYTON 3.2 hp Electric Motor, Mounted on a 60 gal. Vertical Air Receiver Tank, (NOTE: The Compressor has been Removed and was Not Found on the Premises.).
|
|
|
METPRO CENTRIFUGAL PUMP Lot #48 (Sale Order 38 of 69) 1 1/2 x 3 x 8-1/2 185079 RA1146 Ductile Iron Material of Construction, powered by BALDOR 7.5 hp Electric Motor, mounted on a Channel Steel Base. Pump Only, No Piping.
|
|
|
TANK, BOILER FUEL TANK Lot #49 (Sale Order 39 of 69) No. 2 Fuel Oil, 330 gal. capacity, Oval, Mounted on 4- 12 in. high (approx.) Pipe Legs. Tank Only, No Piping.
|
|
|
TECO LOT 37 (approx.) VARIABLE SPEED DRIVE UNITS Lot #50 (Sale Order 40 of 69) MA 7200 and FM 100 Consisting of but not necessarily limited to: 1- TECO MA7200; 10- TECO FM 100 Fluxmaster; 4- TECO FM 100 Fluxmaster, 4- TECO FM 100 Fluxmaster; 3- TECO FM 100 Fluxmaster; 1- TECO N3 AC Drive. (NOTE: These are Wall Mounted in the Boiler/Air Compressor Room) With 3- TECO FM100; 3- TECO FM 100 1- SIEMENS Type P1 250 amp Electrical Control Box Panel E Circuit Breaker, (NOTE: These are on the North Wall of the Production Room.) With 3- FM 100 Big VFD, 3- FM 100 Medium VFD, 1- Electrical Circuit Breaker Panel E. (Location-North Wall Inside) With 5- SIEMENS MOTOR STARTER CONTROL BOXES (Location-North Wall Outside) With EATON CUTLER HAMMER PANEL A 208Y/120V, 3 PHASE, 4 WATT CIRCUIT BREAKER PANEL Wall Mounted, having 400 amp. Main Breaker and Breakers for 7-VFD Modules. (Location-North Wall Inside) Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
LAB EQUIPMENT Lot #51 (Sale Order 41 of 69) With CANNON INSTRUMENT COMPANY® CONSTANT TEMPERATURE BATH CT-500 Series II 1380-A1606 With 2- Catalog No. 9721-1359 and 2- Catalog No. 9721-B53 Calibrated Viscometers. (NOTE: 2- are Installed and 2- are Spares in a Box.) With VANGUARD CENTRIFUGE 6500 39246. With MICRO CENTRIFUGE SD 44364. With KODAK PROCESS THERMOMETER Catalog No. 106 4955 Type 3. With THOMAS SCIENTIFIC LAB ACCESSORIES 1- Catalog No. 6035N80; 4- Column Clamps, 3- with Rings and Cushioned Jaws. With 2- THOMAS SCIENTIFIC PRECISION HYDROMETERS Catalog No. 6025C35. With 2- COLE-PALMER INSTRUMENTS CO. 20 DUAL-SCALE UNIVERSAL HYDROMETER Catalog No. 08287. With THOMAS SCIENTIFIC HIGH VACUUM GREASE Dow Corning® Catalog No. 8691J65. With BURKLE GRADUATED COLUMN 50.01 ml, Siphoning Device with Bottle and Flask. With LOT GLASSWARE Consisting of but not necessarily limited to: 3- KIMAX® 250 mL and 1-500 mL Beaker; 2- KIMBLE KIMAX® 250 mL Flask; 5- PYREX® KIMAX® 250 mL Vacuum Flask; 9- PYREX® 250 mL Beaker; 6- PYREX® 600 mL Beaker; 5- PYREX® 1000mL Beaker; 8- KIMBLE KIMAX® 1000 mL Beaker; 6- KIMBLE KIMAX® 1500 mL Beaker; 21- PYREX® 250 mL Flasks. With LOT PYREX® AND KIMAX® GRADUATED COLUMNS Consisting of but not necessarily limited to: 1- 2000 mL, 1- 500 mL, 1- 100 mL, 1- 50 mL, 1- 25 mL and Catalog No. 2962 250 mL (est.). With LOT STAND AND ROD COLUMN 4- Dense Ring Attachment Fittings; 4- Dense Clamp Attachment Fittings. With 2- BARNSTEAD INTERNATIONAL STIRRING HOT PLATES Cimarec™. With LOT SUPPLIES AND CONSUMABLES Consisting of but not necessarily limited to: Stoppers, Rubber, Safety Glasses, Plastic and Brown Glass Bottles, Filter Bags, Centrifuge Sample Tubes. 1- Box of 137 (Original Count) (approx.) Bottles, Plastic, No. 45-400-244PX-300, having Screw-On Cap Tops, 300 cc capacity, Amber with Lids. With EUTECH INSTRUMENTS OAKTON® PH6 PH/MV/ °C METER Acorn Series. With HACH HARDNESS TEST KIT 5-EP Catalog No. 1454-00. With PHLIP TEST BIODIESEL TESK KIT. With TABLE, WORK 35 in. high x 6 ft. long x 2 ft. wide having a 4 in. high Back-Stop, Stainless Steel, 1- Mid-Positioned Shelf. With PORTA STREAM® EMERGENCY EYEWASH STATION 130-00 Fend•All 338685 Wall Mounted. With 2- FILE CABINETS Vertical, Wood, 6- Drawer. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
OIL DRY CORPORATION OF AMERICA LOT 6 PALLETS OIL DRY Lot #52 (Sale Order 42 of 69) Select 450 Bag Size 40 lbs./18 kg, (NOTE: 4- Pallets contain 60- Bags per Pallet, and 1- Pallet contains 12- Bags) and 1- Pallet of Select 450 Bag Size 40 lbs./18 kg (NOTE: Pallet contains 36- Bags).
|
|
|
LOT TANKS Lot #53 (Sale Order 43 of 69) Consisting of: 4- Fiberglass 20 in. dia. x 58 in. tall (approx.) Domed on Top and Bottom, Skidded.
|
|
|
LOT 10 (approx.) INTERMEDIATE BULK CONTAINERS Lot #54 (Sale Order 44 of 69) Each 300 gal capacity., Used.
|
|
|
LOT BARRELS, STEEL AND PLASTIC Lot #55 (Sale Order 45 of 69) 55- gal capacity, Various Contents.
|
|
|
WARREN RUPP DIAPHRAGM PUMP Lot #56 (Sale Order 46 of 69) TGN-1-C1, Sandpiper® 233095 .
|
|
|
BALDOR ELECTRIC MOTOR Lot #57 (Sale Order 47 of 69) 1.5 hp, Enclosure-XPFC, 230-460 VAC, 3 phase, 1755 rpm, (NOTE: New-Is in OEM Shipping Box).
|
|
|
DEKKER & TUTHILL LOT 2 NEW IN THE BOX PUMPS Lot #58 (Sale Order 48 of 69) TUTHILL PUMPS Catalog No. 4314-VC-7 Powered by Electric Motor, (NOTE: New-Is in OEM Shipping Box). DEKKER VACUUM PUMP DV0041B-DA2, Cat. No. DV0041B 070118S01 Ductile Iron Material of Construction, (NOTE: New-Is in OEM Shipping Box).
|
|
|
SIEBRING MFG. INC. FORCED AIR HEATER Lot #59 (Sale Order 49 of 69) HW 250 72718 250,000 BTU Heat Input, Multi-Fuel. With TABLE, WORK Fabricated Carbon Steel, 42 in. high x 60 in. long x 53 in. wide having an Air Compressor powered by Electric Motor on Air Receiver Tank and a 1 in. (est.) Gear Pump powered by Electric Motor. With TANK, OIL STORAGE 330 gal., Oval, Upright, Steel, mounted on 12 in. tall (approx.) Pipe Legs having Agitator/Mixer powered by EMERSON .5 hp Electric Motor. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
PLATFORM SCALE Lot #61 (Sale Order 50 of 69) Having a 24 in. x 42 in. Load Cell and MTI Digital Read-Out, 250 kg x 100 g, 500 lbs. x 0.2 lbs. capacity.
|
|
|
LOT 2 TANK COMPONENTS, FABRICATION Lot #62 (Sale Order 51 of 69) Carbon Steel, consisting of but not necessarily limited to: 4- Domed Caps, min. thickness .235 in., Heads are Head Cold Formed, Sidewalls are 54 in. dia. x .250NX2, overall height 15.625 ft., Nucor Steel A/SA516-70.
|
|
|
LOT 3 HOSES Lot #63 (Sale Order 52 of 69) Consisting of but not necessarily limited to: 1- 4 in. x 12 ft. long (est.) having QC End Coupling Fittings, 1- 4 in. x 47 in. long (est.) having QC End Coupling Fittings, and 1-2-1/2 in. x 15 ft. long (est.) having QC End Coupling Fittings.
|
|
|
LOT 9 JOINTS PIPE, CARBON STEEL Lot #64 (Sale Order 53 of 69) 2-1/2 in to 1/2 in. OD, 1- Joint is 2 in. x 21 ft. long (approx.) Threaded; 2- Joints are 2-1/2 in. x 4 ft. long (approx.) Square Cut.
|
|
|
ADVANCE TABCO SINK, TRIPLE, STAINLESS STEEL Lot #65 (Sale Order 54 of 69) T-9-6-54 18RL 27 in. wide x 76 in. long having a Left Hand Drain Platform.
|
|
|
LIFT RITE PALLET JACK, MANUAL Lot #66 (Sale Order 55 of 69) 500 lb. capacity. With MATERIAL HAND TRUCK With Pneumatic Wheels. With 3- MATERIAL DOLLIES 2- are Square 30 in. x 30 in. (approx.), 1- is 30 in. x 60 in. (est.)
|
|
|
LOT 4 TOTES, FRYER OIL Lot #67 (Sale Order 56 of 69) Plastic, 150 gal. (est.) capacity each, having Hinged Top Lid Fill Port with Mesh Screen for Large Solids. With 2- TANKS Fiberglass, 400 gal. (est.) Vertical, Flat Bottom, Open Top.
|
|
|
LOT PLUMBING RELATED FITTINGS, PARTS AND SUPPLIES Lot #68 (Sale Order 57 of 69) Consisting of but not necessarily limited to: For 2-1/2 in. Pipe: 12-(approx.) 90° Ells, 5- (approx.) Tees, 3- (approx.) Unions, 9- (approx.) Nipples 6 in. long and shorter, 3- (approx.) Plugs, 1- Cap, 12- (approx.) Fittings for 4 in.; with 1- Shelf containing various Stainless Steel Fittings and various Fittings for 2 in. and 1 in. Pipe; 1- Plastic Crate containing 15- (est.) 2 in. and smaller Weld Neck Fittings, 90° Ells, Tees, and Flanges, 2 in. to 1/2 in. (est.). With 1- Tub, Plastic containing 12- (approx.) QD Fittings 3 in. (est.), 24- (est.) Gaskets 6 in. to 1-1/2 in. (est.) ID (NOTE: Most appear to be New); 3- Plastic Crates (Both Partially Filled) containing QC Fittings, 3 in. and 1-1/2 in. ID; (NOTE: 2- Boxes contain Metal Fittings with 1- Box containing PVC Fittings) 1- Crate Valves, Brass, 2-1/2 in. Ball, threaded and other Brass Fittings. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
LOT 60 (approx.) BARRELS, PLASTIC Lot #69 (Sale Order 58 of 69) 55 gal. and 30 gal. (est.), 29- (approx.) are 55 gal., 8- (approx.) are 30 gal., 30- (approx.) are Steel, and 7- (approx.) are Plastic,; 24- HPPE 55 gal. Drums having full opening Top with Steel Closing Rings.
|
|
|
ACE ROTO-MOLD TANK Lot #70 (Sale Order 59 of 69) 1,000 gal (est.) Horizontal, HDPE, with 4- Saddle Tank Supports; 1- Tank 500 gal. (est.) Horizontal, HDPE. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
WORLD LIFT FORK LIFT Lot #71 (Sale Order 60 of 69) WFG50C 0302523297 (Mfg. Pre-2003 (est.) 5,000 lbs. capacity (est.), LPG powered Engine, 2- Stage Mast, ROPS Protection Device, Clear and Caution Lights, solid Warehouse Tires, 0840 Indicated Meter Hours. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
LOT 12 (approx.) SECTIONS FIBERGLASS LIQUID SPILL CONTAINMENT FENCING Lot #72 (Sale Order 61 of 69) 14 in. high x 12 ft. long (approx.) with Flanges to secure the Foundations.
|
|
|
WACKER NEUSON SUMP PUMP Lot #73 (Sale Order 62 of 69) PD 3 Powered by HONDA GX120 Air Cooled Gasoline Engine, with 4- Cartridge Type Filter Units.
|
|
|
CAT LOT GENERATOR Lot #100 (Sale Order 63 of 69) LC5 G5A00638 250 Kw, 313KVA Standby Rating, 3- Phase, 12- Wire WYE Parallel Wound, powered by CAT C9 398 hp Turbo Charged Diesel Engine s/n 69L00431 (Mfg. 2006), 1976.1 Hours, Turbocharged, DC Electric Starter, Part No. 5672900101, Radiator, s/n M18553, having CAT Generator Control Panel with EMCP3.2 Digital Human Interface Control Panel and No. 240-87036 Authentication Panel, 1- HARCO Exhaust Muffler having Flex Expansion Coupling, Elevated 30 gal. capacity Expansion Tank. With SENA BATTERY CHARGER, AUTOMATIC TWO RATE REGULATED With 15 ft. high x 6 ft. wide x 10 ft. long (approx.) Fabricated Steel Support Tower, All are Unitized and Mounted on a 14 in. high x 63 in. wide x 134 in. long Fabricated 2- Beam Steel Base. With PALLET INSULATION BLANKETS FOR THE ENGINE MUFFLER (NOTE: Apparently New/Unused, Never Installed on the Gen Set.) (NOTE: Stored on the Top of the 25 ft. long Sea-land Shipping container in the NW corner of the Room.) Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
EASTERN TANKS LOT 3 FUEL TANKS, HORIZONTAL, OVAL, ABOVE GROUND Lot #101 (Sale Order 64 of 69) 1149087 (Mfg. 07/2008); 1622 (Mfg. 05/2007); and 1621 Mfg. 05/2007) Carbon Steel, 330 gal. capacity Each, 12 ga./2.5 mm Metal Thickness, Each mounted on 4- 12 in. high (approx.) Pipe Legs, with connecting Piping and Electrical Wiring, Manifold, Each with SCULLY SIGNAL CO. Sight Fuel Level Gauge. Co. Nos. 1, 2, and 3. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
POWER BLANKET HEATING BLANKET Lot #102 (Sale Order 65 of 69) Electrical, 6 ft. wide x 12 ft. long (approx.).
|
|
|
TOTAL CONTROL SYSTEMS FLUID PUMP Lot #103 (Sale Order 66 of 69) 682-15SP3AT 655615 (Mfg. 2009) With VEDDER-ROOT Totalizer and Ticket Printer.
|
|
|
ELECTRICAL CONTROL PANEL Lot #104 (Sale Order 67 of 69) Consisting of but not necessarily limited to: With EMERSON® ASCO SOFT LOAD CONTROLLER With ASCO® 7000 Series Power Transfer Switch, having Paralleling Switch, 7 ft. high x 3 ft. wide x 20 in. deep (approx.), consisting of but not necessarily limited to: 3- MADISONIC Ultrasonic Full Level Sensors; 1- FPB Paddlewheel Flow Meter; 7- Digital Temperature Sensors; 1- Humidity Sensor. With 2- SCHWEITZER ENGINEERING LABORATORIES DIRECTIONAL OVERCURRENT RELAY SEL-351 Reclosing Relay, Fault Locator and SELogic® Control Equations; 1- Unit is mounted in a 30 in. high x 24 in. wide x 12 in. deep Wall Mounted Steel Panel and 1- is New/Unused in its OEM Shipping Box. With SABER ENGINEERING INC. GENERATOR MASTER CONTROL SYSTEM Wall Mounted Control and Instrumentation Panel providing Human - Machine Interface enabling Real-Time and Historical On-Site and Remote Access to Operation Parameters and Metrics. With CURRENT TRANSFORMER Functions to allow Grid Utility to monitor Electricity being fed into the Grid by the Vendor; with 1- SQUARE D Power Logic® Ion® 7330 Meter; with 1- ECOM Stationary Equipment Emissions Analyzer Control Panel, Wall Mounted. With PALLET ELECTRICAL POWER DISTRIBUTION EQUIPMENT Consisting of but not necessarily limited to: 1- Meter Box, 1- Weather-Proof Control Panel, for Wall Mounting, 1- Plastic Carton of Electrical Circuit Breakers, 1- Box containing 2- Spools of Wire and Various Circuit Breakers. (NOTE: The CARRIER Window Type Air Conditioner Is NOT being Sold.) Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|
|
CONTROL MODULE INDUSTRIES / ELECTRIC VEHICLE SUPPLY EQUIPMENT AUTOMOBILE CHARGING STATION Lot #105 (Sale Order 68 of 69) 3722, Public Garage, Overhead Type Automatically Lowers to 4 ft. high Level, extends to a 16 ft. radius to Most Vehicle Charging Ports, Automatically Retracts to Storage Position at End of Cycle.
|
|
|
MODINE 2 FORCED AIR HEATERS Lot #106 (Sale Order 69 of 69) CoGeneration, Reclaimed Heat from Coolant, 24 in. x 24 in. (approx.). With LOT PIPING Cogeneration Heat Recovery from CoGen Plant to Biodiesel Production Plant. Additional photos of this item (and many others) can be found at www.maascompanies.com.
|
|