Equipment Marketers & Appraisers (EMA) Auction Catalog - Valley Contracting, Inc Online Auctions

Generator

Lot #1 (Sale Order 1 of 492)

Generator, Coleman PowerMate 8750 Maximum watts, 120/240 V outlets, manual 13 hp Honda engine.

Generator

Lot #2 (Sale Order 2 of 492)

Generator, Honeywell model HW5500E, serial number 100807V09020001446, 5500 watt, 120 240 V, single phase,

Generator

Lot #3 (Sale Order 3 of 492)

Coleman PowerMate generator, Vantage 3500, 3500 W, gasoline power, manual start, 120/240 V circuit.

Generator

Lot #4 (Sale Order 4 of 492)

Heavy duty, power systems generator, model HD 8000 GX, single phase, 6.5 KW rated output, peak output 7KW, power factor one dot zero, 60 Hz, 27 amp, single phase, 120/240 V AC, AC 240 V 25, has new appearance. Used for 45 minutes.

Generator

Lot #5 (Sale Order 5 of 492)

North Star generator, Honda gas engine, 2000 W.

Generator

Lot #6 (Sale Order 6 of 492)

Generator, Firman 1200, 1500 starting watts, 1200 running watts, 120 V.

Generator

Lot #7 (Sale Order 7 of 492)

Generator Honda model EG3500X, 120/240 V, single phase, Honda gas power engine.

Generator

Lot #8 (Sale Order 8 of 492)

Generator Multi Quip power model GA -2.5H, Serial number 571-3658, 2500 W.

Generator

Lot #9 (Sale Order 9 of 492)

Multi quip generator model GA ? 2.5 H, maximum output 2500 W, frequency 60 Hz, phase 1, serial number 572-6844, manual start..

Generator

Lot #10 (Sale Order 10 of 492)

MI T M generator chore master 3000 W, manual start, gas power, (2) 120 V outlets, (1) 120 V 30 amp. New in 2023.

Generator

Lot #11 (Sale Order 11 of 492)

Generator, Champion power equipment model C46538, 120 240 V, 35 AC watts, yellow in color.

Plate compactor

Lot #12 (Sale Order 12 of 492)

Plate compactor, Wacker model BPU3050A Honda gas power engine unable to find the ID tag, 16" x 18" plate reversible.

Plate compactor

Lot #13 (Sale Order 13 of 492)

Plate compactor, Mikasa unable to find the ID tag, Honda gas power engine, reversible tight, 12" x 16" plate.

Plate compactor

Lot #14 (Sale Order 14 of 492)

Plate compactor, Mikasa Model MVH ? 120, Honda gas power engine, forward and reverse, 16" x 12" plate size, function on an as needed basis.

Plate compactor

Lot #15 (Sale Order 15 of 492)

Plate compactor, MQ Mikasa MVC 82VHMQ, 352608h14288, Honda gas power, has new appearance. New the fall of 2023.

Compactor

Lot #16 (Sale Order 16 of 492)

Wacker compactor model BS 60?2 I, the rubber boot is in good condition,

Compactor

Lot #17 (Sale Order 17 of 492)

Wacker compactor, model BS52Y, serial number 750805762, 2.3 hp.

Air compressor

Lot #18 (Sale Order 18 of 492)

Air compressor, heavy duty power system, wheel barrel type, Honda manual start gas power engine, 10 gallon capacity, serial number T14381802X064, black in color.

Sprayer

Lot #19 (Sale Order 19 of 492)

Sprayer mounted on cart, requires battery power.

Sprayer

Lot #20 (Sale Order 20 of 492)

Sprayer, mounted in a frame, requires a battery.

water pump

Lot #21 (Sale Order 21 of 492)

Multiquip water pump, size 3 x 3, serial number 3TH ? 1900 Honda manual start, mounted on shop built cart with gas tank.

Water pump

Lot #22 (Sale Order 22 of 492)

Water pump, multi quip, model QP Dash 4TH, size 4 x 4, serial number 4TH2581, 4 inch capacity, Honda gas power engine, customer modified additional fuel tank.

Water pump

Lot #23 (Sale Order 23 of 492)

Water pump, multi quip model QP Dash 4TH, size 4 x 4, serial number for TH -2926, Honda gas powered engine, 4 inch.

Water pump

Lot #24 (Sale Order 24 of 492)

Water pump, multi quip model QP Dash 3TH, size 3X3, serial number 3TH06008, 3 inch, Honda gas powered engine

Water pump

Lot #25 (Sale Order 25 of 492)

Wacker water pump gas power, manual start, model PT3 a, CT 570-6683, 8 hp,

Water pump

Lot #26 (Sale Order 26 of 492)

Home light gas powered pump, single cylinder, 3 inch, old unit. 8S 3 1 R.

Water pump

Lot #27 (Sale Order 27 of 492)

TSURUMI pump model number B0712018 model number 055, submergible type, 120 V, 3 inch.

Water pump

Lot #28 (Sale Order 28 of 492)

submergible water pump, model number SS 300 number B ? 643438, 3 inch, 110/220 V, yellow and color

water pump

Lot #29 (Sale Order 29 of 492)

Submerge Water pump, multi quip model ST 3020BCUL capacity 145 gallons per minute max output 2 hp with 3 inch discharge voltages a 230 V 10 1/2 amp serial number 547585, purchase new very good appearance.

water pump

Lot #30 (Sale Order 30 of 492)

Assorted water pumps, submergible type, 110 V, condition unknown, 2 inches.

Water pump

Lot #31 (Sale Order 31 of 492)

Submergible water pumps, 120 V, 2 inch, old units, condition unknown.

submergible water pump

Lot #32 (Sale Order 32 of 492)

Submersible pump mustang MP4800 110 volt 2 inch submersible pump 2021 model.

Water pump

Lot #33 (Sale Order 33 of 492)

Submersible pump mustang MP4800 110 volt 2 inch submersible pump 2021 model.

submergible water pump

Lot #34 (Sale Order 34 of 492)

Multiquip submersible water pump, 2 inch discharge, model number ST 2040T, capacity is 79 gallons per minute max , 115 V 6.8 A.

Water pump

Lot #35 (Sale Order 35 of 492)

Water pump, Gorman Rupp diaphragm type model 3D 14, serial number 307059, Honda gas power.

Water pump

Lot #36 (Sale Order 36 of 492)

Water pump, Honda model HD3XH, 3H, centrifugal type, very good appearance.

Water pump

Lot #37 (Sale Order 37 of 492)

Heavy duty power systems, trash pump model HD3XH, 5 1/2 hp head 30 m, maximum capacity 60 m/h, Honda manual start engine, appears to be near new condition.

Water Pump

Lot #38 (Sale Order 38 of 492)

Multi quip contractor pump, model QP ? 2H, size 2 x 2 serial number 2H ? 7368, Manual start, appears to be near new condition.

Core drill

Lot #39 (Sale Order 39 of 492)

Milwaukee core drill catalog number 4096, serial number 798C315230230, demo drill, 2 inch To 10 inch, mount Dymo rig catalog number 4120, includes meter box, vac, this entire system was purchased New, Not used. Paid 3160.00 as new.

Core drill bit

Lot #40 (Sale Order 40 of 492)

Hilti core drill bit, 16 inch, limited usage.

Core drill bit

Lot #41 (Sale Order 41 of 492)

New Hilti core drill bit, 14 inch, DDBS, H2S. Inbox.

Core drill bit

Lot #42 (Sale Order 42 of 492)

Husqvarna core drill bits, 10 inch and 12 inch, segmented diamond core, new in the boxes.

$550.00 x 2 = $1,100.00 Total

Core drill bit

Lot #43 (Sale Order 43 of 492)

Assorted core drill bits, 10 inch 12" 14 inch , (1) is in new.

$125.00 x 5 = $625.00 Total

core drill bit

Lot #44 (Sale Order 44 of 492)

Assorted used cord drill bits, 8 inch, various condition.

$175.00 x 4 = $700.00 Total

Core drill bits

Lot #45 (Sale Order 45 of 492)

Assorted core drill bits, various sizes, including 6 , 4, 3 " some are new, includes extensions.

$175.00 x 5 = $875.00 Total

Core drill

Lot #46 (Sale Order 46 of 492)

Core drill, Black & Decker, model CB 748, two speed, mounted on US diamond base, does not have the vacuum pads.

Core drill

Lot #47 (Sale Order 47 of 492)

Core drill, Milwaukee drill, meter box, aluminum frame, does not have the vacuum pads or the water pump. Unable to find him the manufactures ID tag.

Manhole accessory

Lot #48 (Sale Order 48 of 492)

Manhole and sewer, laser, fixtures, assorted lot.

Manhole lifeline

Lot #49 (Sale Order 49 of 492)

Manhole lifeline, DVI/SALA aluminum frame, Includes cable winches.

Manhole lifeline

Lot #50 (Sale Order 50 of 492)

Manhole lifeline, DVI/SALA aluminum frame, includes cable winch.

Pipe smoke blower

Lot #51 (Sale Order 51 of 492)

Pipe smoke blower Hurco technologies rip cord, new in 2000, serial number RP18H ? 05/08/00?056, 5 hp electric motor,

Pipe Mandril

Lot #51A (Sale Order 52 of 492)

(2) Cherne deflection gage.

Test Ball Reels

Lot #51B (Sale Order 53 of 492)

Assorted test balls reels.

Pipe test cap

Lot #52 (Sale Order 54 of 492)

Cherne manhole tester, 32 inch plate, 220?328.

Ventilation fans

Lot #53 (Sale Order 55 of 492)

Ventilation fans, 110 V, with hose.

Ventilation fans

Lot #54 (Sale Order 56 of 492)

Manhole ventilation fans with hose. Model number 39012W 430 watt.

Ventilation fan.

Lot #55 (Sale Order 57 of 492)

Homelite ventilation fan model number 200EB ? one serial number 82710074, free air flow rate 1419 ft. per minute. With hose.

Chain and binders

Lot #56 (Sale Order 58 of 492)

Chain and binders

Lot #57 (Sale Order 59 of 492)

Chain and binders

Chain and Binders

Lot #58 (Sale Order 60 of 492)

Chain and binders

Tie down straps

Lot #59 (Sale Order 61 of 492)

Tie down straps

Saw

Lot #60 (Sale Order 62 of 492)

Concrete saw, Husqvarna model FS7000D serial number 001364207001 new in 2017, 26 inch cutting capacity, tier 4 engine, 65 hp, 529 hours on the meter, hours have been added since publication, used on a jobsite, very good appearance. Sells with owners confirmation.

Saw

Lot #61 (Sale Order 63 of 492)

Husqvarna concrete saw, model FS3500, serial number serial number 00188025100, meter hours 193 , this saw was purchased new and is in near new condition.

Saw

Lot #62 (Sale Order 64 of 492)

Concrete saw, Norton clipper, model 63530SS, serial number is unavailable, Vanguard gas power engine, 24 inch diamond blade, hours of usage is unknown.

Power washer

Lot #63 (Sale Order 65 of 492)

Power washer, Landa model ENG 5?23024A, serial number 11098130?000051, 2300 psi, 5 gallons per minute, maximum temperature 240ø, 439,000 BTU, 230 V single phase, natural gas, stationary type, retractable hose, purchased new, 4100 hours on the meter.

Power washer

Lot #64 (Sale Order 66 of 492)

Hotsy power washer, serial number 6217, 1000 psi, 115 V, 1.5 hp, single phase, 210,000 BTU, 132 gallons per minute at 1000 psi, 20 amp, on cart, with wand.

Pressure tester

Lot #65 (Sale Order 67 of 492)

Pressure tester, Hurco technologies Inc. Old faithful pumper, model HGP 10?500 H, serial number 052620?100, gas power engine, pneumatic type, molded plastic reservoir tank, 20 gallon capacity, purchased new, in new condition.

Pressure tester

Lot #66 (Sale Order 68 of 492)

Pressure tester, Hurco technologies Inc. model HTP 10?500, serial number unknown, gas power engine, pneumatic type, molded plastic reservoir tank, 20 gallon capacity, purchased new.

Power unit

Lot #67 (Sale Order 69 of 492)

Power Team hydraulic power supply, Catalog number 210842, Sn 381152, Model A, 10HP, 3 ph, includes tension clamp and 1 roll of cable. Sells with owners confirmation.

Skid Loader

Lot #68 (Sale Order 70 of 492)

2021 Bobcat Skid Loader model T770, s/n AT6328328, rubber tracks, enclosed cab, hand and foot control, key ignition, 870 hours on the meter, at the time of publication, hours have been added, used on a jobsite, 2-speed, radio, 78 1/2 inch general purpose, bucket with bolt on cutting edge, Bob-o-Tach hydraulic quick coupler, air conditioning and heat, purchased new, One owner, very good appearance. Sells with owners confirmation.

Skid Loader

Lot #69 (Sale Order 71 of 492)

2021 Bobcat Skid Loader model T770, s/n AT6330399, 2-speed, track type, enclosed cab, hand and foot control, standard hydraulics, has air conditioning and heat, satellite radio, Bob-o-Tach hydraulic quick coupler, key ignition, 950 hours on the meter, backup mirrors, one owner purchased new, very good appearance. Sells with owners confirmation.

Skid Loader

Lot #70 (Sale Order 72 of 492)

2014 Bobcat Skid Loader model T770, s/n AN8T12793, rubber tracks installed new in 2022, enclosed cab, original paint and decal, the paint is coming off in areas, Bob-O-Tach quick coupler, standard flow hydraulics, hand and foot controls, key ignition, 2800 hours on the meter, heater only, 79 inch bobcat General purpose, bucket with bolt on cutting edge, good appearance, new tracks in 2022. Includes assorted filters.

Skid Loader

Lot #71 (Sale Order 73 of 492)

2013 Skid Loader Bobcat T770, s/n AN8T11944, rubber track new in 2023, new drive gears in 2023, 2650 hours on the meter, enclosed cab, standard flow auxiliary hydraulics, auxiliary mirror, standard ignition, no air conditioning, hand and foot control.

Skid Loader

Lot #72 (Sale Order 74 of 492)

2018 Bobcat Skid Loader model S740, s/n B38BT13668, tire size 12-16.5NHS, Bob-O-Tach hydraulic quick coupler, standard flow auxiliary hydraulics, foot and hand control, key ignition, 733 hours on the meter, air conditioning and heat, original paint

Skid Loader

Lot #72a (Sale Order 75 of 492)

2019 Bobcat Skid Loader model S740, s/n B3BT14541, enclosed cab, tire size 12-16.5NHS with 100% tread, Bob-O-Tach hydraulic quick coupler, backup mirrors, standard flow hydraulics, foot and hand controls, key type ignition, 322 hours on the meter, purchased new, one owner.

Plow

Lot #73 (Sale Order 76 of 492)

Silt fence plow, serial number 1398, skid loader type with universal coupler, standard unit.

Attachment

Lot #74 (Sale Order 77 of 492)

2011 Paladin FFC Auto rake hydraulic Preparator model LAF3566-0924, s/n 1131210, branded Case, 66" width, bi directional drum, universal coupler.

Impact Breaker

Lot #75 (Sale Order 78 of 492)

Bobcat Impact breaker model 250006, s/n 693204822, skid loader coupler. Rebuilt in 2022.

Snowblower

Lot #76 (Sale Order 79 of 492)

Bobcat Snow Blower model 1812X73, serial number 712000336, Universal skid loader coupler, 72 inch width, hydraulic chute angle, hydraulic rotation, appears to have had limited usage.

Snowblower

Lot #76a (Sale Order 80 of 492)

Bobcat snow blower model 2118X85, 85" width, SN 712400179, hydraulic chute and rotation, universal coupler.

Blade

Lot #77 (Sale Order 81 of 492)

Bobcat 90 Dozer blade, s/n 231911429, angle dozer blade, universal coupler, hydraulic angles.

Broom

Lot #78 (Sale Order 82 of 492)

Sweepster broom, model 22084MH-0022, s/n 1233012, universal skid loader coupler, 86" width, 100% broom core, has good appearance.

Rock Picker

Lot #79 (Sale Order 83 of 492)

Loftneess Kwil Pik Rock Picker, for a skid loader.

Snow blade

Lot #80 (Sale Order 84 of 492)

Jacobs snow blade, 96 inches width, hydraulic angle, has been modified to work on a universal skid loader coupler.

Grapple bucket

Lot #81 (Sale Order 85 of 492)

2023 Jenkins Skelton rock and brush grapple bucket, 84 inch width, 32 inch tongs, universal skid loader, coupler, purchased new, appears to have no usage.

Grapple bucket

Lot #82 (Sale Order 86 of 492)

Grapple bucket, universal skid loader coupler, 60 inches width, solid steel base, older unit, appears to be in good condition.

Bucket

Lot #83 (Sale Order 87 of 492)

Hydraulic grapple bucket, designed to fit on a skid loader, universal coupler, 60" width, The bottom of the bucket has rock and soil filtration tines.

Bucket

Lot #84 (Sale Order 88 of 492)

Skid loader bucket, rock, debris and material sorting tines, weld on dirt teeth, skid loader coupler, 80" width.

Bucket

Lot #85 (Sale Order 89 of 492)

Soil separator, rock bucket, Skid loader brackets, 80 inches width, low profile sides, has bucket teeth.

Leveler

Lot #86 (Sale Order 90 of 492)

Bobcat land plane 78" width, with scarifier ripper bar, universal coupler.

Scarifier ripper

Lot #87 (Sale Order 91 of 492)

Scarifier ripper bar, skid loader coupler, five shank.

Spreader

Lot #88 (Sale Order 92 of 492)

Spreader, hydraulic spinner, universal skid loader coupler, significant rusting, old unit, it appears it has been use for sand and salt.

Skid loader bucket

Lot #89 (Sale Order 93 of 492)

Bobcat skid loader bucket, 86 inch severe duty, part number 732-6128 With teeth.

Skid loader, Buck

Lot #90 (Sale Order 94 of 492)

Bobcat skid loader bucket, 84 inch heavy duty C/I, serial number 712-5917, bucket teeth.

Skid loader bucket

Lot #91 (Sale Order 95 of 492)

Skid loader bucket, 84 inch width, bucket teeth, Bobcat coupler.

Skid loader bucket

Lot #92 (Sale Order 96 of 492)

Bobcat skid loader bucket, 84 inch heavy duty C/I, serial number 712-5917, with teeth.

Skid loader fork attachment

Lot #93 (Sale Order 97 of 492)

Fork attachment for skid loader, 42 inch forks, universal coupler.

Skid loader, fork attach

Lot #94 (Sale Order 98 of 492)

Fork attachment for skid loader, 48 inch fork, universal coupler.

Fork attachment

Lot #95 (Sale Order 99 of 492)

2016 Fork attachment for skid loader, model MDS, 5515 WTCF, serial number 11968, 4000 pounds maximum capacity

Fork attachment

Lot #96 (Sale Order 100 of 492)

Fork attachment, MDS brand, 4000 pound capacity, 48 inch forks.

Skid loader, fork attachment

Lot #97 (Sale Order 101 of 492)

Fork attachment for skid loader, 48 inch forks, universal coupler.

Fork attachment

Lot #98 (Sale Order 102 of 492)

Fork attachment for skid loader coupler, hydraulic fork positioning, 48 inch forks.

Fork attachment

Lot #99 (Sale Order 103 of 492)

Fork attachment for skid loader, 48 inch forks, universal coupler.

Dozer

Lot #100 (Sale Order 104 of 492)

2009 John Deere dozer model 850J, s/n TC850JR179553-650149, standard undercarriage, 24" grouser width, was purchased used with 104 hours currently has 369 hours on the meter, this was built for the military, painted green, enclosed cab, has air conditioning and heat, extreme duty salt rails, 100% wear remaining on the undercarriage, straight blade with tilit, the bits and cutting edges are in very good condition, Factory John Deere controls. Has the 3rd valve with the rear auxiliary hydraulic connection, has the armored proof cab. (Trimble EM Mast Poles are currently on machine, if purchaser does not buy lot 0100A, these will be removed) includes assorted filters. Sells subject to owners confirmation.

GPS System

Lot #100a (Sale Order 105 of 492)

The GPS system which can be used for the John Deere 850J: (2) Trimble EM mast poles, Trimble CB450 control, (1) Trimble LR410 P/N 0312-50 and 0312-0051, SN 1568-J0036D and 1618-J001SD. Sold subject to the sale of lot 100

Dozer

Lot #101 (Sale Order 106 of 492)

2009 John Deere dozer model 700J LGP, s/n T0700JX175725, 30" grouser pads, EROPS cab, brush sweeps, 3239 hours on the meter, radio, heat and air conditioning, the interior is in good condition, original paint and decal, sheet metal is straight, has good apperance.

Dozer

Lot #102 (Sale Order 107 of 492)

1999 John Deere 450H dozer, serial number 874188, OROPS, LGP track, PAT blade, 24" width grousers, the top mounted angle cylinder is seeping fluid, has a new set of rails, new bottom rollers, new replace top rollers, new replaced hydraulic tensioning cylinders, the grousers bar have been built up, 6106 hours on the meter, original paint and decal, has good appearance, has rear mounted hydraulics.

Dozer

Lot #103 (Sale Order 108 of 492)

1990 Komatsu D58P dozer, SN 883, 33" grousers, straight blade with hydraulic tilt, OROPS, the rails and sprockets were replaced new 8 years ago with limited amount of usage, draw bar, original paint and decal, engine enclosure, hour meter reads 2,313.

Crawler Loader

Lot #104 (Sale Order 109 of 492)

International crawler loader, model 125C, serial number 125-0826, OROPS with sweeps, GP bucket with teeth, 14 inch grouser pads, certain grouser pads have been replaced with the 15 inch pad, Needs a new seal on the input shaft, left side top roller replaced as new.

Vacuum Excavator

Lot #105 (Sale Order 110 of 492)

2005 Ditch Witch FX 30 Vacuum Excavator, VIN 1DSB202S3517Z2269, SN of Vac 2Z0774, Kubota diesel power, mounted on tandem axle, 1736 hours on the meter, 200 gallon poly water tank, 800 gallon pressure vessel, pintle hitch, original paint and decal. New pressure washer pump installed in 2023.

Vacuum Excavator

Lot #106 (Sale Order 111 of 492)

2012 Ditch Witch Vacuum Excavator, model FX30, s/n 1DSB122C8C1702330, SN CMWFX30XLC0001600 , 500 gallon pressure tank, tandem axle carrier with 8-lug rim, tire size ST235/80R16, 200 gallon molded plastic water tank, Kubota diesel power, 377 hours on meter, pintle hitch, hose racks, original paint and decal.

Wheel Loader

Lot #107 (Sale Order 112 of 492)

1999 John Deere wheel loader model 544H, s/n DW544HX574369, EROPS, JRB quick coupler with hydraulic pin lock, includes JRB GP bucket with 2.5 yard capacity, BOCE, new tires were installed in 2021, tire size 20.5R25L3, steer cylinders do seep fluid, original paint and decal, the sheet metal is straight, air conditioning, heat, radio, 2295 hours on the meter, lift cylinder and tilt cylinder recently rebuilt. Includes assorted filters.

Wheel Loader

Lot #108 (Sale Order 113 of 492)

1990 John Deere wheel loader model 544E, s/n DW544EB531136, EROPS, 9112 hours on the meter, tire size 20.5-25L2, front left tire sidewall has cuts, GP bucket with JLB quick coupler, bucket cylinder seeps fluid, BOCE, original paint and decal, the injector line needs to be adjusted, steer cylinders are seeping fluid, used on a routine basis. One of the differential was replaced 9 years ago.

Wheel Loader

Lot #109 (Sale Order 114 of 492)

2013 Kawasaki (KCM Corporation) wheel loader model 67Z7, s/n 65J5-5065, tire size 20.5R25, set up with a JRB hydraulic quick coupler with Paladin 99" bucket with BOCE, hydraulic cylinders do not seep fluid, original paint and decal, enclosed cab, traction control, 2-speed, bucket float, auto shift, 2040 hours on the meter, backup camera, radio, overall has good appearance, Isuzu diesel power engine. New battery installed in 2022.

Wheel Loader

Lot #110 (Sale Order 115 of 492)

1990 Bobcat wheel loader, model 2410, articulated frame, front tire size 14-17.5NHS recently replaced as new, 4,242 hours on the meter, replaced engine in in 2019, manual quick coupler, GP bucket, enclosed cab, purchased new, one owner. Includes assorted filters.

Bucket

Lot #110a (Sale Order 116 of 492)

Melroe material bucket 43 pounds per cubic foot maximum, 77 inches width, universal skid loader coupler. Was purchased new, one owner.

Jib attachment

Lot #111 (Sale Order 117 of 492)

2023 JRB jib attachment for a wheel loader, Paladine serial number J000170901 1, designed to fit on a John Deere wheel loader, three section manual boom, main boom section is 80 inches in length, quick coupler flanges, has new appearance. Paid 5585.00.

Fork attachment

Lot #112 (Sale Order 118 of 492)

JRB fork attachment, for a 544G wheel loader, serial number DEW1838, fork length 60", 98 inch carriage width, quick coupler flanges.

Fork attachment

Lot #113 (Sale Order 119 of 492)

JRB fork attachment, Model Q 48 fork, serial number J000019976?3, design to fit on a John Deere wheel loader, 48 inch forks, 64 inch carriage width, good appearance.

Fork attachment

Lot #114 (Sale Order 120 of 492)

Caterpillar fork attachment for a wheel loader, 8 foot carriage width, 60 inch length, quick coupler flanges. The flanges have been modified from the original manufacture. Designed to fit on a John Deere wheel loader.

Loader bucket

Lot #115 (Sale Order 121 of 492)

JRB wheel loader bucket, 88 inch width, bolt on bucket teeth, quick coupler flanges, does not have a manufacturer ID, has been modified.

Side boom

Lot #116 (Sale Order 122 of 492)

Midwestern side boom attachment, model M16R, serial number 050061154 designed to work on a John Deere 544H wheel loader, hydraulic drive winch, counterweights.

Snow blade

Lot #117 (Sale Order 123 of 492)

Craig snow blade, model 6963H, serial number 87455, has been modified with a quick coupler to be used on a loader, hydraulic angles, used predominantly for snow removal.

Bucket

Lot #118 (Sale Order 124 of 492)

MDS manufacturing rock bucket, part number 12220, uses JRB 500 quick attach couplers, 95 inches width, 3 of the separation bars are missing the teeth, has good appearance.

Bucket

Lot #119 (Sale Order 125 of 492)

John Deere wheel loader bucket, model AT149750, 2.5 yd. capacity, fits a John Deere 544G, quick coupler flanges, bolt on bucket teeth. 100 inches in width,

Attachment

Lot #120 (Sale Order 126 of 492)

Log grapple attachment for a wheel loader, designed to fit a John Deere 544 with quick coupler, left hydraulic cylinder seep fluid, the left hydraulic cylinder is bent, right hydraulic cylinder recently replaced, has fair appearance.

Bucket

Lot #121 (Sale Order 127 of 492)

Balderson loader bucket with a quick coupler, 100 inches width, left side dump bucket, serial number 145210, model B86?2 YO.

Compactor

Lot #122 (Sale Order 128 of 492)

2007 Dynapac CA 150, s/n 7332US5313, vibratory roll compactor, pad foot with a front leveling blade, 66" drum, open operator's platform, Cummins diesel power, rear tire size 14.9-24, original paint and decal, 900 hours on the meter.

Compactor

Lot #123 (Sale Order 129 of 492)

1986 Bomag compactor, model BW172PDB-2, s/n 109520510186T, 66 inch pad drum, open operators platform with canopy, leveling blade, rear tire size 14.9?24, original paint and decal, the paint is faded, new seat, 3984 hours on the meter. Rebuilt center knuckle 5 years ago.

Compactor

Lot #124 (Sale Order 130 of 492)

1998 Bomag self-propelled pad foot compact, model BW142 PDW 2, serial number 109510510271V, 56 inch pad drum, hydraulic front leveling blade, the rubber boots are torn and should be replaced, tire size 12.4-24, open operators platform with canopy

Compactor

Lot #125 (Sale Order 131 of 492)

2011 Stone model P054, serial number 062011388, 54 inch pad drum, does not have a leveling blade, rear tires 9.5?16, open operators platform with canopy, John Deere diesel engine, original paint decal, 1059 hours on the meter. new starter, new alternator in 2017.

Compactor

Lot #126 (Sale Order 132 of 492)

2007 Rammax/Multiquip, model AR23, s/n 20567, smooth drum roll compactor, 39" drum width with water attachment, roll bar, open operator's platform, Yanmar 3-cylinder diesel power engine, 862 hours on the meter, hydrostat control, articulated frame, original paint and decal.

UTV

Lot #127 (Sale Order 133 of 492)

1993 Kawasaki Mule 500 ORV, SN JK1ABFF10PB502293, electric dump box, tire size 22 x 9.00-10, gas power,

UTV

Lot #128 (Sale Order 134 of 492)

2018 Kawasaki model KHF400HJF, SN JK1AFEH13JB504393, 4x4, canopy, windshield, tire size 25x11.00-12NHS, 3529 hours on meter, gas power, purchased new, one owner.

Empty

Lot #129 (Sale Order 135 of 492)

Empty

Motor Grader

Lot #130 (Sale Order 136 of 492)

1984 Fiat-Allis FG75 motor grader, glass is cracked, tire size 14.00R 24, most of the side windows have cracks, 12' moldboard, front mounted scarifier, hydraulic shift and tip, front left steer cylinder is seeping fluid, ball joint cup is cracked, Fiat diesel engine, 2081 hours on the meter which is not actual, brakes are not functioning.

Pull Scraper

Lot #131 (Sale Order 137 of 492)

Allis Chalmers 260 pull scraper has been converted from cable to hydraulic, has (2) new hydraulic cylinder, the tires are in good condition, the bowl is in good condition, 20 yard capacity, the gooseneck has not been damaged, the lift cylinders have been replaced as new, hoses have been replaced as new.

Utility Tractor

Lot #132 (Sale Order 138 of 492)

1976 Ford 1600 A1012T utility tractor , SN U103821, 1144 hours on meter, manual gear box, 2-cylinder diesel power engine, open operator's platform, drawbar, 540 PTO, 3-pt. hitch, single hydraulic circuit, original blue color, rear tire size 11.2-24, good appearance.

Cultivator

Lot #133 (Sale Order 139 of 492)

Spring tooth cultivator, three-point hitch, 72 inches left to right, 15 shank , basic unit

Box blade

Lot #134 (Sale Order 140 of 492)

Tif Way box blade, 72 inches left to right, with front mounted scarf ripper requires a three-point hitch, back blade,

Rear blade

Lot #135 (Sale Order 141 of 492)

Ford blade, model 782A, requires a three point hitch, 84 inches left to right

Air Compressor

Lot #136 (Sale Order 142 of 492)

Sullair 185JD portable air compressor, s/n 200608020017, 185 cfm, John Deere diesel power, 464 hours on the meter, The hour meter is not functioning, original paint and decal, has good appearance.

Air Compressor

Lot #137 (Sale Order 143 of 492)

1994 Atlas Copco portable air compressor, model XAS85 DD, SN ARP923246, 185 CFM, Deutz diesel power engine, 3,386 hours, tire size P215/70 R 14.

Welder

Lot #138 (Sale Order 144 of 492)

2006 Miller portable welder, Bobcat 250, serial number LG100309, 250 amp, 10,500 watt generator, electric start, 365 hours on the meter, welding leads, original paint and decal, also includes bottle rack, includes Acetylene oxygen torch, mounted on on a single axle trailer, pintle hitch, five lug rim, tire size P235/75R 15, good appearance.

Excavator

Lot #139 (Sale Order 145 of 492)

2008 John Deere 270DLC Long Reach excavator, s/n FF270DX703617, 2775 hours on the meter, Tag 60 inch finishing bucket 1.250 cu yd capacity, does not have a quick coupler, does not have auxiliary hydraulic, John Deere diesel power engine, 31 1/2" grousers, eight roller frame, 20' 10 1/2" stick, has a total of 47'4"' maximum depth, sheet metal is straight, air conditioning and heat, radio, original paint and decal. Very good appearance. Sells with owners confirmation.

Excavator

Lot #140 (Sale Order 146 of 492)

2014 Case CX 350C excavator, s/n DAC350K6NFSP1345, long chassis, Standard boom, 13'3" arm, 33.5" steel shoes, control pattern selector, free swing, side view camera, quick coupler with hydraulic pin, 2500 hours on meter, 12'6" arm with mechanical thumb flanges, standard boom, 33-1/2" grouser width, enclosed cab, 9-roller frame, the bottom of the house on the left rear corner is dented, original paint and decal, backup inside view camera, Isuzu engine. No bucket. Good appearance. Reconditioned radiator in 2022. Includes assorted filters. Purchased new, one owner. Sells with owners confirmation.

Bucket

Lot #141 (Sale Order 147 of 492)

Excavator bucket, 60 inches wide, 2.42 cu. yd., Fits the case CX 350C excavator, bucket teeth, has good appearance, minor dent on the bottom of the bucket, overall has good appearance.

Bucket

Lot #142 (Sale Order 148 of 492)

Excavator bucket, 47 inch sand, Fits the Case CX 350 C excavator, the pins are welded into the flanges, set up to be used with a quick coupler.

Bucket

Lot #143 (Sale Order 149 of 492)

Excavator bucket, American Fabricators, 69 inch width, no bucket teeth, has been hardwired on the bottom and sides, fits a case CX 350 C excavator.

Bucket

Lot #144 (Sale Order 150 of 492)

SEC excavator finishing bucket, 88 inch width, the bucket pins are welded into the flanges, heavy duty bucket. Fits a Case CX 350 C excavator.

Excavator

Lot #145 (Sale Order 151 of 492)

2010 John Deere 270D excavator, s/n 1FF270DXAA0703999, 13'6" arm, auxiliary hydraulics, hydraulic quick coupler with pin lock, standard boom, 12' 4" stick, 31-1/2" grouser width, 9-roller frame, radio,4,637 hours on the meter, air conditioning and heater, radio, original paint and decal, sheet metal is straight, standard machine, good appearance, it does have the mechanical thumb flanges on the stick. No bucket.

Bucket

Lot #146 (Sale Order 152 of 492)

Excavator bucket, 48" width, replaceable bucket teeth, set up to be used with a John Deere 270 D excavator.

Bucket

Lot #147 (Sale Order 153 of 492)

Excavator bucket, 72 inch width, Fits a John Deere 270 D.

Grapple

Lot #148 (Sale Order 154 of 492)

CF mechanical type grapple, 60" width, certain grapple tongs are bent, fits and John Deere 270 D excavator.

Bucket

Lot #149 (Sale Order 155 of 492)

Excavator bucket, sand can 42" width, pins are welded into the flanges, fits a John Deere 270 D. Set up to be used with a quick coupler.

Excavator

Lot #150 (Sale Order 156 of 492)

2017 Kobelco SK210LC-9 excavator, s/n Y013-2615, 9'6" stick, auxiliary hydraulics, mechanical thumb flange, ESCO hydraulic quick coupler with pin lock, standard boom, 31" width of the grousers, 94" gauge, enclosed cab, hours on the meter, air conditioning and heat, original paint and decal, sheet metal is straight, no dents, Hino engine, Interim tier 4 DPF (No DEF), has good appearance. No bucket, One owner purchased new.

Bucket

Lot #151 (Sale Order 157 of 492)

Badger excavator bucket, sand can, 36" width, good appearance, the bucket pins are free, being used with a quick coupler. fits a Kobelco 210 excavator.

Bucket

Lot #152 (Sale Order 158 of 492)

Badger excavator bucket, 72” width, reinforced supports inside the bucket, bolt on cutting edge, the bucket pins are not welded into place, currently being used with a quick coupler. Fits a Kobelco SX 210LC excavator.

Bucket

Lot #153 (Sale Order 159 of 492)

Hensley excavator bucket, 1.27 yd., serial number 17 ?P9, 48" wide, the bucket pins are welded into the flanges, the bottom of the bucket is starting to show dents, currently is being used on a Kobelco SX 210 LC excavator.

Bucket

Lot #154 (Sale Order 160 of 492)

Excavator bucket, 13 inch width, custom modified flanges with bucket pins welded into place, currently being used with a quick coupler, currently being used on a Kobelco SK210LC excavator., also sets a 130 size excavator.

Compactor

Lot #155 (Sale Order 161 of 492)

Hydraulic plate compactor, unable to ID name, the pins and bushings have been modified, currently being used on Kobelco SK210LC excavator, 36" x 30" plate, the rubber boots are in good condition.

Excavator

Lot #156 (Sale Order 162 of 492)

2021 Link Belt 130X4LC excavator, s/n LBX13007NKHEX1218, Purchased New, 78" gauge, 28" pad width, 7-roller frame, enclosed cab, air conditioning, heat, AM/FM radio, information display, 1684 hours on the meter, 1684 hours on the meter, backup camera, ESCO hydraulic quick coupler with pin lock, 10' arm, auxiliary hydraulics, standard boom, Isuzu diesel power engine. Very good appearance, Purchased new, One owner. No bucket. Sells with Owners Confirmation.

Excavator

Lot #157 (Sale Order 163 of 492)

2007 Link-Belt, LB 130LX excavator, s/n K1J7-2822, manufacturer's #13003-1498, 10' arm, hydraulic quick coupler, auxiliary hydraulics, standard boom, 27-1/2" pad width, 79" gauge, original paint and decal, radio, 6448 hours on the meter, has harnessing for an impact breaker or plate compactor, Isuzu engine. No bucket. New rails and front idles in 2020. 1 of the planetaries has had repair, Purchased new, One owner.

Excavator

Lot #158 (Sale Order 164 of 492)

2012 Case CX130B excavator, s/n DAC130K5NCSAD1724, 10' arm, standard boom, auxiliary hydraulics, ESCO quick coupler with hydraulic pin, 28" grouser width, 78-1/2" gauge, new rails and idlers in 2023, new cylinder on bucket repaired in January of 2024, 7-roller frame, enclosed cab, 3,748 hours on the meter, radio, air conditioning and heat, original paint and decal, sheet metal is straight, minor dent on the right compartment door, Isuzu diesel power engine, includes a mechanical thumb. No bucket. Purchased New with 10 hours on meter, one owner.

Compactor

Lot #159 (Sale Order 165 of 492)

Allied Plate compactor, 28" x 32" plate, rubber boots are in good condition, custom modified coupler appears to be in good condition. Currently configured to be used with a quick coupler, will fit a 130 size excavator.

Bucket

Lot #160 (Sale Order 166 of 492)

Backhoe bucket, which has been converted, will fit 130 or 210 size excavator, 12" width, currently set up to be used on a quick coupler.

Bucket

Lot #161 (Sale Order 167 of 492)

Excavator bucket, 36" width, welded bucket teeth, no side cutters, boom pins are welded into the flanges, fits a 130 size excavator, designed to work with a quick coupler. Has side cutters.

Bucket

Lot #162 (Sale Order 168 of 492)

EBI excavator bucket sand can, 32" width, modified flanges, boom pins or welded into the flanges, set up to use with a quick coupler, was used on a John Deere 490E excavator and the case or a 130 size excavator.

Bucket

Lot #163 (Sale Order 169 of 492)

Ditching excavator bucket, 60 inches width, fits the Case CX 130 B and the Link Belt 130 size excavators.

Compactor

Lot #165 (Sale Order 170 of 492)

GePac compactor, hydraulic plate compactor, fits on a 130 excavator, 24" x 30" plate size, new motor new eccentric installed March 11, 2024 4000.00 COST OF REPAIR, bucket pins have been welded into place, has good appearance.

Bucket

Lot #166 (Sale Order 171 of 492)

Geith excavator bucket, serial number 987005 manufactured date March 12, 2019, heavy duty type, 36" width, bucket teeth, the bucket has good appearance, has side cutters. fits a 130 size excavator.

Bucket

Lot #167 (Sale Order 172 of 492)

2023 Empire Spoon excavator bucket, serial number E9 919?1, 36" width, this will fit a 130 size excavator, limited usage, in near new condition. Paid 10,100 as a new price.

Bucket

Lot #168 (Sale Order 173 of 492)

2023 Esco ditching bucket, serial number RH134290, .95 yd. 60" width, will fit a Komatsu PC 170 or a 130 size excavator, the pins are welded into the flanges, bolt on cutting edge. Purchased new.

Plate compactor

Lot #169 (Sale Order 174 of 492)

HED plate compactor, Rubber boots are in good condition, 24" x 30" plate size, The coupler pins are welded into the side flanges. Currently set up to be used with a quick coupler, will work on a 130 size excavator.

Bucket

Lot #170 (Sale Order 175 of 492)

Excavator bucket, 12 inch width, flanges have been welded into place, currently set up to be used with a quick coupler. fits a 130 size excavator

Bucket

Lot #171 (Sale Order 176 of 492)

Esco excavator bucket, 24" width, side cutters, bucket teeth, flanges have been welded into place, currently set up to be used with a quick coupler. Fits a 130 size excavator.

Bucket

Lot #172 (Sale Order 177 of 492)

Excavator bucket, 30" width, flanges have been welded into place, currently set up to be used with a quick coupler, fits a 130 size excavator. rebuilt in 2023.

Bucket

Lot #173 (Sale Order 178 of 492)

Excavator ditching bucket, 42" width, flanges have been welded into place, currently set up to be used with a quick coupler. Fits a 130 size excavator. rebuilt in 2022.

Excavator

Lot #174 (Sale Order 179 of 492)

2007 John Deere mini Excavator model 35D, serial number FF035DX237133, 69 inch arm, standard boom, hydraulic thumb, mechanical, quick coupler, auxiliary hydraulic on the arm, no bucket, front leveling blade, 12 inch track width,enclosed cab, conditioning and heater, radio, 2925 hours on the meter, original paint and decal. No bucket.

Bucket

Lot #175 (Sale Order 180 of 492)

Mechanical quick coupler attachment, shop built. fits a 35D John Deere excavator

Compactor

Lot #176 (Sale Order 181 of 492)

FRD Hydraulic plate compactor 20" x 12" width, flanges have been welded into place, currently set up to be used with a quick coupler, fits the John Deere 35D excavator.

Bucket

Lot #177 (Sale Order 182 of 492)

Excavator bucket, 12" width, flanges have been welded into place, currently set up to be used with a quick coupler. Fits a John Deere 35D bucket.

Bucket

Lot #178 (Sale Order 183 of 492)

Tag excavator bucket, 16" width, flanges have been welded into place, currently set up to be used with a quick coupler. Fits a John Deere 35D excavator.

Bucket

Lot #179 (Sale Order 184 of 492)

CP excavator bucket 19 inch, mechanical quick attach flanges, will fit on a John Deere 35D excavator

Bucket

Lot #180 (Sale Order 185 of 492)

Excavator finishing bucket, 33 inch width, no bucket teeth, set up with quick coupler flanges, will fit a John Deere 35D excavator.

Impact Breaker

Lot #181 (Sale Order 186 of 492)

Rock ram impact hammer model 775, s/n 571155. Has a shop built quick coupler flanges, has been used with a Kobelco SK210LC-9 excavator. Includes an extra breaker point. can fit a 130 size excavator

Impact Breaker

Lot #182 (Sale Order 187 of 492)

Rock ram impact breaker, model 777, cylinder 235056, custom-made excavator arm coupler. Has been functioning with a Kobelco SK210LC-9 excavator, designed for a quick coupler.

Bucket

Lot #183 (Sale Order 188 of 492)

2022 Trojan skeleton bucket, 60 inch width, bolt on cutting edge, was purchased new, has new appearance. Fits 12 T 65, Pin diameter 65 mm, pin centers 15.75 inches, ear width 10.24 inches, bucket weighs 983 pounds.

Grapple

Lot #184 (Sale Order 189 of 492)

Bodine Grapple, mechanical type, 36" width, has been used on a Kobelco SK 210LC 9 excavator. we'll fit a 130 size excavator.

Bucket

Lot #185 (Sale Order 190 of 492)

Excavator bucket, sand can, 53" width, boom pins are welded in place, open top design, the chrome pins would need to be resurfaced. Will function with a Case CX 130 B excavator.

Bucket

Lot #186 (Sale Order 191 of 492)

EBI Excavator bucket, sand can, serial number E5023?.75, boom pins are are not welded, 28" width, 3/4 cu yd capacity. Has been used on the Case CX 130BLC excavator.

Bucket

Lot #187 (Sale Order 192 of 492)

Excavator ditching bucket, welded bucket teeth, 16 inches in width, boom pins are welded into place, fits a John Deere 490D excavator or Case CX 130B, it appears the bucket has been tore and repaired, fair condition.

Bucket

Lot #188 (Sale Order 193 of 492)

Excavator bucket, 17 inches width 45 inches height, modify flanges, pin booms are welded in place, older bucket, fair appearance. will fit a 130 size excavator

Grapple

Lot #189 (Sale Order 194 of 492)

Mann Grapple mechanical type, 43" width and 30 inches width has good appearance, used on a Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #190 (Sale Order 195 of 492)

SEC Excavator bucket, 42 inch width, the bucket pins are capable of being removed. Fits a Kobelco SK210 LC ? 9 excavator.

Frost tooth

Lot #191 (Sale Order 196 of 492)

Frost tooth, boom pins have been welded into place, has been used on a Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #192 (Sale Order 197 of 492)

Excavator sand can bucket, boom flanges have been modified, pins are welded into the flanges, 36" width, sides are dented, Has been used on a Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #193 (Sale Order 198 of 492)

Destec excavator bucket, 24" width, welded on bucket teeth, 60" height, bucket pins are welded into the flanges. will fit Kobelco 210 excavator

Bucket

Lot #194 (Sale Order 199 of 492)

Esco excavator bucket, heavy duty extreme design, 2.53 yd.? capacity, serial number RH84002, boom pins are not welded in place, bucket teeth, side cutters, the bottom of the bucket does have minor dents. will fit Case 350 excavator.

Grapple

Lot #195 (Sale Order 200 of 492)

SEC grapple, mechanical type, 50" width and 30 inches width complete unit, good appearance, used on a Kobelco SK 210LC 9. will fit Case 350 excavator.

Bucket

Lot #196 (Sale Order 201 of 492)

Excavator bucket, SEC brand name, , boom pins are welded into place, 32" width, welded on bucket teeth, has been used on a Case CX 350C excavator, fits Caterpillar 330BL excavator.

Bucket

Lot #197 (Sale Order 202 of 492)

EBI e excavator sand can bucket, serial number E5270, 1.75 yd.?, Bucket pins are welded to the flanges, 48" height, 40" width, Was used on the Case CX 350 C excavator.

Bucket

Lot #198 (Sale Order 203 of 492)

Excavator sand can bucket, modified flanges, boom pins are welded to the flanges, 38" width. Used on a Case CX 350C excavator.

Bucket

Lot #199 (Sale Order 204 of 492)

Excavator bucket, AUI model BU 22, Extreme service frost bucket with two levels of approach, 22 inch lower level, 45 inch upper level designed to dig two different depths simultaneously, bucket pins or welded into the flanges, good appearance appears to be in good condition. will fit a case 350 excavator.

Bucket

Lot #200 (Sale Order 205 of 492)

Destec excavator bucket 66" width, bolt on cutting edge, flanges have been custom modified, boom pins have been welded in place, has been used on a Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #201 (Sale Order 206 of 492)

Excavator bucket, 54" width , has a welded on cutting edge, the cutting edge is nearly consumed, boom pins are welded into the flanges. Was used on a Cabelo SK 210LC ? 9 excavator.

Compactor

Lot #202 (Sale Order 207 of 492)

Plate compactor, NPK C6 serial number 0003, rubber boots are in good condition, 27" x 30" plate size, modified flanges, boom pins or welded into the flanges. Was used on a Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #203 (Sale Order 208 of 492)

Excavator bucket, 52" width, welded on bucket teeth, boom pins are welded into the flanges. Has been used on the Kobelco SK 210LC ? 9 excavator.

Bucket

Lot #204 (Sale Order 209 of 492)

Excavator bucket, 72" width, welded on bucket teeth, modified boom flanges, boom pins are welded into place, the bucket has been modified. Has worked with the Kobelco SK 210LC ? 9 excavator. Would also fit a Link Belt 2800 excavator.

Bucket

Lot #205 (Sale Order 210 of 492)

Excavator sand can bucket, 24" width, custom modified boom flanges with the boom pins welded in place, was used on a Case CX130BLC excavator.

Bucket

Lot #206 (Sale Order 211 of 492)

Adco frost bucket, 22" width, the flanges have been modified, boom pins are welded into the flanges, the bucket appears to be in good condition, will fit a 130 size excavator.

Bucket

Lot #207 (Sale Order 212 of 492)

Geith excavator bucket, 24" width, boom pins have not been welded in place, bucket teeth, has been used with the link belt 130 LX excavator.

Bucket

Lot #208 (Sale Order 213 of 492)

Excavator ditching bucket, 66" width, boom pins are welded into the flanges, weld on cutting edge, center support frame, has been used on a case CX 130BLC excavator.

Frost tooth

Lot #209 (Sale Order 214 of 492)

Frost tooth, custom modified adapter plate, boom pins are welded into place, was used on a case CX130BLC excavator.

Headache ball

Lot #210 (Sale Order 215 of 492)

Headache ball, approximately 3000 pound, has good appearance.

Bucket

Lot #211 (Sale Order 216 of 492)

Excavator sand can bucket, 36" width, the flanges are designed for a quick coupler. Was used on a Link Belt 2800 excavator.

Compactor

Lot #212 (Sale Order 217 of 492)

Genpac hydraulic plate compactor, 24" x 30" plate size, rubber boots appear to be in good condition, has a modified quick coupler flanges, was used on a John Deere 490 excavator.

Bucket

Lot #213 (Sale Order 218 of 492)

Esco excavator bucket designed to fit a Link Belt LS 3400, serial number RH48136, standard duty, boom pins have not been welded in place.

Bucket

Lot #214 (Sale Order 219 of 492)

Backhoe bucket, 12" width, ID number X7588, no pins, older bucket, fair condition.

Bucket

Lot #215 (Sale Order 220 of 492)

Concrete bucket, 1/2 yard capacity, appears to be in good condition.

Bucket

Lot #216 (Sale Order 221 of 492)

Concrete bucket, approximately 2 yard capacity, has good appearance has not been used for sometime.

Empty

Lot #218 (Sale Order 222 of 492)

Empty

Fork extensions

Lot #219 (Sale Order 223 of 492)

Fork extensions, 8' length.

Truck tractor

Lot #220 (Sale Order 224 of 492)

2001 Mack CL733, VIN 1M1AD64Y02M001222, 62,000 lb. GVWR, 18,000 lb. front set-back axle, front tires 385/65R22.5 aluminum rims, 44,000 lb. rear axle capacity 11R22.5 on aluminum rims, 20,000 lb. pusher axle air lift and non-steerable, camel back rear suspension, Cummins 600 hp engine red block, has a wet kit, twin stacks, Maxi torque extended range 18-speed transmission, the odometer reads 27000 miles and 15,500 hours on the meter, the mileage is not correct it has a replaced odometer, speed control, power windows, engine brake, power divider lockout, sliding 5th wheel, double frame, aluminum headache rack with strobe lights, polished aluminum fuel tanks, polished aluminum steps, polished stainless steel bumper, white in color, includes assorted filters. Previous owner stated the truck had 418000 miles when the truck was sold.

Trailer

Lot #221 (Sale Order 225 of 492)

2012 Pitts RGN lowboy trailer model LB52-24D, VIN 5JYLB5238CP120637,122,600 lb. GVWR, non ground bearing, 52 ton capacity, 18600 weight, narrow neck, approximately 96" from kingpin to neck, 8'6" width, 24' length in the well, outriggers, D-rings, 27" from deck to ground at the center of the camber, excavator well, triple axle, 6-bag air ride suspension, tires 255/70R22.5, 54" axle spacing, does not have the attachment for a fourth flip axle, overall length of approximately 50', black in color. Purchased new, one owner.

Truck

Lot #222 (Sale Order 226 of 492)

2001 Kenworth T800 truck tractor, VIN 1XKDD09X31J877460, chassis #877460, Cummins ISM 330 ESP engine, RTX13709H transmission 8 speed, ratio 3.90, 48,000 GVWR, chassis weight 14,360 lb., day cab, 566532 miles on the odometer, 4-bag air ride suspension, dump valve, interaxle differential lock, traction control, speed control, heated mirrors, AM/FM radio, air brakes, AC, front tires 295/75R22.5 on aluminum rims, rear tires 275/80R22.5, 80 gallon aluminum fuel tanks, single stack, sliding 5th wheel, 12,000 lb. front axle, 22,000 lb. rear axle capacity, the cab is yellow in color, tapered frame, currently set up to pull a lowboy trailer, New alternator in the fall of 2023, inner cooler in May 2021, 5th wheel was replaced. Includes assorted filters.

Trailer

Lot #223 (Sale Order 227 of 492)

2012 Pitts fixed neck lowboy trailer model LB35-33, VIN 5JYLB3526CP120630, single drop, 86,200 lb. GVWR, 35 ton capacity, 16200 lbs. weight, tandem axle, approximately 35' length deck, 3' beavertail, hydraulic fold up ramps, tandem axle, tires 235/75R17.5, spring suspension, 46" deck to ground with outriggers supports and D-rings, 8'6" width, the upper deck is 84" length, blue in color, anti-lock brake system, has very good appearance, Purchased new, one owner.

Truck tractor

Lot #224 (Sale Order 228 of 492)

1995 Peterbilt 357 truck tractor day cab, VIN 1XPAD60X0SD367824, GVWR is 26,340 kg the front axle is 6380 kg tandem axle 19,980 kg, pusher axle airlift and non-steerable, front tire size 11R24.5 on aluminum rims, the rear tire size 11R 24.5 on aluminum rims, the pusher axle has 11R 22.5 on aluminum rims, 4 bag air ride suspension, wet kit, sliding fifth wheel, 100 gallon aluminum fuel tank, Eaton Fuller 18 speed transmission, Cummins diesel power engine N14E, air ride dump valve, inner axle differential lock, full locking rear differential's, engine brake, 1,117,211 miles on the odometer, 9 hours on the meter, has a aluminum headache rack, two fuel tanks, the front bumper is bent, used to pull a side dump trailer. Engine and clutch were rebuilt in 2016, limited usage since.

Side Dump Trailer

Lot #225 (Sale Order 229 of 492)

2013 Smithco side dump trailer, model SX3-42-34, VIN 1S9SS4237DL476615, GVWR 87520, Ridewell suspensions, tandem axle with air lift tag axle, 6 bag air ride suspension, 11R 22.5 tires on steel rims, 34' tub, 41'5" frame length, 102" width, 8'3" height at tub side. electric tarp, has not been upset, red in color, very good appearance.

Truck tractor

Lot #226 (Sale Order 230 of 492)

2005 Sterling truck tractor day cab, model AT 9513, VIN 2FWJAZCV15AU73432, 476,475 miles on odometer, 12,000 pound front axle capacity, 40,000 pound rear axle capacity, front tire size 11R 24.5 on aluminum rims, rear tire size 11R 24.5 on aluminum rims, 4 bag air ride suspension, sliding fifth wheel, twin stacks, wet kit, Eaton Fuller 18 speed transmission, inner axle differential lock, wheel lock, engine brake, built-in trailer brake, twin stacks, Mercedes Benz diesel engine, red in color cab. New transmission in 2019, repaired the 5th wheel in 2021, overhauled engine at 441,500 miles, new PTO,

Dump truck

Lot #227 (Sale Order 231 of 492)

2005 Kenworth T800 dump truck, VIN 1NKDXU0X15J101128, Caterpillar C13 Acert, Eaton Fuller transmission RTO16908LL 8-speed with low low, scale weight 26720 GVWR 68,000 lbs., rear axle axle ratio 4.11, miles on the odometer, hours on the meter, wheel differential lock, full locking rear differentials, speed control, power mirrors, engine brake, (2) seats in the cab, front tire size 425/65R22.5 on aluminum rims, 20,000 lb. front axle, 40,000 lb. walking beam rear suspension capacity, single pusher axle, airlift and steerable, pusher tire size 295/75R22.5 on aluminum rims, tandem axle tires 11R22.5 on aluminum rims, equipped with an 18' steel box with electric tarp. Transmission worked completed in 2023. New telescoping lift cylinder in May 2023, replaced power divider. Assorted filters are included.

Dump truck

Lot #228 (Sale Order 232 of 492)

2003 Volvo Dump truck, VIN 4V5KC9GG63N341238, 460824 miles on odometer, Detroit diesel model VED 12 385 hp, Eaton Fuller RTO-14908LL 10 speed transmission, The transmission was replaced as new in 2020, 20,000 pound front axle capacity, 40,000 pound rear axle capacity, 13,000 pound pusher axle which is air lift and steerable, rear tire size 11R 22.5 on aluminum rims, front tire size 385/65R 22.5 with aluminum rims, aluminum fuel tank, inter axle differential lock, full locking rear differentials, engine brake, two seats, includes Everlite aluminum dump box new in 2003, 18' foot length, rounded bottom, Tapered gate, is set up to pull a trailer, the box shows dents, The rear suspension components were replaced as new in 2020, the front king pins were replaced as new in 2020, the pusher axle was installed as a new in 2019. Engine service completed in 2022. Review service records for details.

Dump truck

Lot #229 (Sale Order 233 of 492)

1998 Ford LT9511 dump truck, VIN 1FDZZ96T6WVA40335, GVWR 58,000 pounds, 18,000 pound front axle, 40,000 pound rear tandem axle capacity, front tire size 385/65R 22.5 on aluminum rims, rear tire size 11 R 22.5, walking beam suspension, Eaton Fuller Road Ranger RTO 8LL transmission, 227359 miles on the odometer, 13,677 hours on the meter, built-in trailer brake, air conditioning, air brakes, AM/FM radio, manual windows, 15 foot steel dump box with straight gate, electric tarp, Caterpillar 3126 diesel power engine, blue in color, Engine was over hauled, New box lift cylinder in 2024 has not been used. New radiator spring of 2023.

Dump truck

Lot #230 (Sale Order 234 of 492)

2004 Sterling dump truck model LT8500, VIN 2FZHAWAKX4M24088, 58,000 pound GVWR, 18,000 pound front axle, front tire size 385/65R 22.5 on steel rims, 40,000 pound rear axle capacity mounted on steel rims, walking beam spring rear suspension, rear tire size 11R 22.5, front tire size 385/65R 22.5 steel rims, Eaton Fuller 13 speed transmission, 188,349 miles on the odometer 8366 hours on the meter, axle lock, wheel lock, air conditioning, heater, AMFM radio, manual windows, manual locks, the tractor ABS warning light is activated, Caterpillar 3126 diesel engine, front mounted live hydraulic PTO, twin hydraulic box cylinders both cylinders have been rebuilt in 2024, Henderson dump box 15 foot length 36 inch sides, the floor has new plate, 15 foot box length, air gate, this originally was a county truck.

Dump truck

Lot #231 (Sale Order 235 of 492)

2001 Freightliner CST120 dump truck, VIN 1FUY0SZB41LG93864, 10-speed Eaton Fuller transmission, this was a truck tractor that has been converted to a dump truck, inter axle differential lock, Freightliner software information, 342458 miles on the odometer, the windshield is cracked, Detroit 60 Series engine, front tire size 385/65R22.5, 12,000 lb. front axle, rear tandem axle, 4-bag air ride suspension, approximately 38,000 lb. rear capacity, 16' steel dump box, 48" side height, no tarp, straight gate. New seat, new hood.

Dump truck

Lot #232 (Sale Order 236 of 492)

1988 Kenworth T 800 single dump truck, VIN 1XKAAB8X3JS509816, GVWR 34,042 pounds, 12,000 pound front axle, 20,000 pound rear, tire size 11R24.5 tires on steel rims, Eaton Fuller 8 speed transmission with low low, 29,998 miles on a replaced odometer, exhaust brake, air brakes, Caterpillar 3406B diesel power , 10' steel box, 34 inch side height, straight gate, cab guard, aluminum fuel tank, single stack.

Dump truck

Lot #233 (Sale Order 237 of 492)

1999 GMC C6500 dump truck, day cab, VIN 1GDJ6H1B7XJ514848, GVWR 23,900 pounds, automatic transmission, 120,682 miles on the odometer, 5679 hours on the Hobbs meter, AM/FM radio, the interior is in good condition, gasoline powered engine, tire size 245/70 R 19.5, includes a Ruby manufacturing contractors dump body with fold down sides 12' length, 17" side height, electric over hydraulic power raise and lower, cab guard, the floor has minor dents and waves, black in color. Left outside tire has a sidewall gouge, and a damaged rim. New hydraulic reservoir tank in 2022.

Cargo truck

Lot #234 (Sale Order 238 of 492)

1995 Isuzu (GMC) box truck, VIN 4KLB4B1A3SJ002953, five speed automatic transmission, 128,665 miles on the odometer, passenger seat, AM/FM radio, manual windows, tire size LT 215/85R 16 tires, Diesel power, Supreme Corporation 18' aluminum cargo box with side door and rear fold up door opaque roof. New alternator fall of 2023.

Service body truck

Lot #235 (Sale Order 239 of 492)

1991 GMC Top Kick SLE truck cab and chassis with infield service body, model C7H042, VIN 1 GDM7H1J9MJ521412, Automatic transmission, 101,854 miles on the odometer, air brakes, differential lock, AM/FM radio, Hobbs meter 4197, manual windows, manual locks, (2) seats, PTO meter reading 824, Caterpillar 3116 diesel power engine, 160 hp, front tire size 295/75R 22.5 on steel rims, rear tire size 295/75R 22.5 on steel rims, includes a steel constructed mechanics body 13'6" length, walk in design, 10 compartment, certain compartments have severe rusting on the bottom of the compartment. New batteries in June of 2023.

Pickup Truck

Lot #236 (Sale Order 240 of 492)

2020 GMC Sierra SLTX 31 off Road pickup truck, VIN 3GTU9DEL0LG156363, 185000 miles on the odometer, 7100 pounds GVWR, four-door crew cab, power windows, power locks, power mirrors, memory seats, built-in electric electric trailer break with trailer tow haul, electronic four-wheel drive, in steering wheel controls, sweet heated steering wheel, heated and cooled captains seating, center counsel, leather interior, does not have a sunroof, OnStar, information display, satellite radio, traction control, impact sensors, side sensors, gasoline power 6.2 L, tire size 275/60 R 20 with 50% tread remaining, maroon in color, running boards, 6 foot box, power tailgate, rear sliding window, spray on bedliner, adaptive cruise control, Purchased new one owner, sells with owners confirmation.

Pickup Truck

Lot #237 (Sale Order 241 of 492)

2015 Chevy 2500 HD pickup truck, VIN 1GC1KUEG7FF158952, GVWR 9900 pounds, four-door crew cab, power windows, power locks, power mirrors, automatic transmission, 40/20/40 front seats, four-wheel-drive shift on the floor, built-in electric trailer brake, trailer tow package, does not have OnStar, traction control, AM/FM radio, 159000 miles on the odometer, rear bench seat, gas power, tire size LT 265/70 R 17, 8 foot box, white in color, chrome steps, no apparent body damage, has heavy cigarette aroma in the cab.

Pickup Truck

Lot #238 (Sale Order 242 of 492)

2015 Chevrolet model 2500 HD pickup truck, VIN 1GC1KUEG1FF148885, GVWR is 9900 pounds, four-door crew cab, power windows power locks power mirrors, automatic transmission, four-wheel-drive shift on the floor, 183000 miles on the odometer, Traction control, does not have OnStar, AM/FM radio, air conditioning, cloth interior, 40/20/40 seats, rear bench seat, 8 foot box, tire size is an LT 245/75R 17, was used during the month of April finishing projects.

Pickup Truck

Lot #239 (Sale Order 243 of 492)

2009 GMC 3500 HD Sierra SLE cab option, VIN 1GTJK83K99F104880, GVWR 11,400 pounds, four-door crew cab, power windows power locks power mirrors, cloth interior, 40/20/40 front seats, 80/20 rear bench seat, built-in electric trailer brake, Trailer tow package, automatic transmission, adjustable brake pedal, electronic four-wheel-drive, AM/FM cassette, 162000 miles on the odometer, gasoline power, 8 foot box, rear single axle dual tires, tires size LT 245/70 R 17 , spray on bedliner, equipped with fifth wheel ball hitch, chrome steps, white in color.

Pickup Truck

Lot #240 (Sale Order 244 of 492)

2013 Chevy model 2500 HD pickup truck, VIN 1GC1KV CG8DF161574, four-door crew cab, power windows, power locks power mirrors, automatic transmission, four-wheel-drive shift on the floor, AM/FM radio with cd, traction control, 167324 miles on the odometer, cloth interior, 40/20/40 front seats, rear bench seats, tire size LT 265/70 R 18, gas power engine, Z 71 off-road package with 8 foot box, white in color, LS cab option.

Pickup Truck

Lot #241 (Sale Order 245 of 492)

2005 Chevy pick up truck model 2500 HD LS cab option, VIN 1GCHK23U15F801919, GVWR is 9200 pounds, four-door crew cab, 242921 Miles on the odometer, power windows, power locks, power mirrors, 40/20/40 front seats, automatic transmission, electronic four-wheel-drive, AM/FM radio cd and cassette player, seat covers, cloth interior, gas powered, red in color, 6 foot box, spray on bedliner, tire size LT 265/75R15, dented on the left side of the box, trailer tow package, chrome steps. Needs new transfer case, issues with low range on 4WD.

Truck

Lot #242 (Sale Order 246 of 492)

1997 Chevrolet 3500 cab and chassis truck, VIN 1GBJC34R9VF020391, GVWR 11,000 pounds, bench seat, cloth interior, five speed manual transmission, 2 wheel drive, manual windows and locks, 166178 miles on the odometer, air conditioning and heat, AM/FM radio with cassette, the interior is reasonably clean for its age, gas power, tire size LT 225/15 or 16 80% tread, 9 foot flatbed with cab guard, has a rotary molded plastic tank with 350 gallon capacity, rusting on the bottom of the cab and on the front right corner panel. Fuel gauge broken, rear fuel tank has a hole in the tank, not usable

Trailer

Lot #243 (Sale Order 247 of 492)

2012 Eager Beaver tag trailer, model 20XPT, VIN 112HHV346CL077310, GVWR 48,818 pounds, single landing jack, pintle hitch, air brakes, 20 foot deck with 5 foot Beavertail, fold up ramps, antilock brake system, D rings, 8'6" width, tandem axle dual tires, tires size 215/75R 17.5 36 inch deck to ground heights, black in color.

Trailer

Lot #244 (Sale Order 248 of 492)

2010 Kaufman fifth wheel trailer, VIN 5SHFH2424AB000717, 8'5" width, 20 foot deck 4 foot beavertail with fold up ramps, side pockets, wood deck is in good condition, tandem axle with dual tires tire size 7.50R16 LT , double landing jack, good appearance.

Trailer

Lot #245 (Sale Order 249 of 492)

2002 H&H Speed Loader MX trailer, VIN 4J6MX20222B039551, 12,000 pound GVWR, 20 foot length 6'10" between the fenders, tandem axle, eight lug rim, tire size LT 235/85R 16, Electric over hydraulic raise, electric landing jack and manual landing jack, electric brakes, adjustable coupler with pintel hitch, side pockets, wood deck is in good condition, black in color.

Trailer

Lot #246 (Sale Order 250 of 492)

2011 Dreesen Custom trailers, VIN4GBBF1823B1022416, 15'7" wood deck with a 28 inch beaver tail, pull out ramps, 83 inches between the fenders, ball hitch, electric brakes, single landing jack, tandem axle, eight lug rim, tire size ST235/80 R 16 with 50% tread, wood deck is in good condition, has good appearance.

Trailer

Lot #247 (Sale Order 251 of 492)

2010 B&B trailer 2010 VIN 4L5SC2521AF018991, adjustable coupler, pintle hitch, manual landing jack, tandem axle, tire size LT 235/85R 16, eight lug rim rims are rusty, fold up ramps, side pockets and D rings, wood deck is in good condition, surface rusting throughout the entire trailer, 18 foot deck, 24" beavertail, 84 inches between the fenders, the paint is faded, used on a routine basis.

Trailer

Lot #248 (Sale Order 252 of 492)

1997 Bobt Bobcat utility trailer, VIN 970603057BCT1612E, six lug rim, tire size ST225/75R 15 tread, wood deck shows wear, fold up ramps, adjustable coupler with pintle hitch, single landing jack, 16 foot length, 79 inches between the fenders, the fenders are dented, blue in color, good appearance.

Trailer

Lot #249 (Sale Order 253 of 492)

2010 B&B Manufacturing utility trailer, Vin 4L5SC2523AF018992, adjustable coupler with pintle hitch, single landing jack, 14,000 pound GVWR, 20 foot deck with 2 foot Beavertail and fold up ramps, 83" between fenders, eight lug rim, tire size ST235/85R 16, D rings and side pockets, blue in color, the right fender has a severe rust spot, paint scratched off in most areas.

Trailer

Lot #250 (Sale Order 254 of 492)

2002 PJ manufacturing trailer PH 222, VIN 4 P5PH222121041998, 18'9" deck over with 3' Beavertail with fold up ramps, 91" deck width, adjustable coupler, pintle hitch, single landing gear, electric brakes, the wood deck is in fair condition, tandem axle, eight lug rim, tire size ST235/80 R 16.

Trailer

Lot #251 (Sale Order 255 of 492)

2008 Dovetail utility trailer, VIN 430FD20248M023958, 19' 8" deck length with a 2 foot Beavertail and fold up ramps, 83" between the fenders, triple axle, eight lug rim, tire size LT 245/75R 16 with 80% tread, wood deck in good condition, tandem landing jacks, adjustable pintle hitch, electric brakes, yellow color frame, GVW 21000 lbs.

Trailer

Lot #252 (Sale Order 256 of 492)

2003 PJ manufacturing utility trailer, VIN 4P5PD242231047996, adjustable coupler with pintle hitch, electric brakes, single landing jack, deck over design, eight lug rim, tire size ST235/80 R 16, 18 foot deck with 3 foot beavertail and fold up ramps, it's good appearance.

Trailer

Lot #253 (Sale Order 257 of 492)

2004 RCM utility trailer, Pintel hitch, adjustable coupler, electric brakes, triple axle, eight lug rim, tire size ST 235/85R 16, 50% tread, diamond plate steel deck, fold up ramps, red in color, heavy duty frame 20 foot overall, 83 inches between the fenders, good appearance good condition.

Trailer

Lot #254 (Sale Order 258 of 492)

2016 Stealth Enterprises enclosed cargo trailer model STSE612SA, VIN 52LBE1214GE043351, 6' x 12', single axle, GVWR 2990 pounds, non-riveted sides, V nose, rear swinging doors, side door, tire size SG205/75R 15, Black in color.

Trailer

Lot #255 (Sale Order 259 of 492)

1995 H &H enclosed cargo trailer, VIN 4J6SC10118B101451, unable to read the mylar tag, 6' x 12', single axle, rear fold down door, side door, paneling interior has good appearance, non-riveted sides, six lug rim, rim, white in color, good appearance.

Trailer

Lot #256 (Sale Order 260 of 492)

Trailer, Triple axle tires are flat and not roadworthy, pintle hitch, 22 foot cargo box with side door and rear door, 8 foot width, rear, swinging doors, metal racking on the inside, no title, sells the bill of sale only

Trailer

Lot #257 (Sale Order 261 of 492)

1994 Corn Huskers pup trailer, VIN 1T91C1935R0007063, triple axle, 17' tongue, triple axle, spring suspension, tire size 11R22.5 on (12) aluminum rims, Ravens 14' aluminum box, manual tarp, frame type, air ride suspensions, brake drums, straight gate, 65 1/2 inch side height.

Trailer

Lot #258 (Sale Order 262 of 492)

1998 Pup trailer, VIN 1B9PC2624WG426002, tandem axle, 15' tubular tongue, 12' box, 385/65R 22.5 tires with aluminum rims, Heil steel box, 84 inch axle spacing, spring suspension, 50 inch box height. Hoist cylinder is seeping fluid.

Dump box

Lot #259 (Sale Order 263 of 492)

Brady dump box, 15'8" in length, tapered frame, 40 inch sides with 12 inch, the floor has a poly liner, includes the hydraulic reservoir tank, does telescoping hydraulic ram. This is a takeoff box, white in color, appears to be in good condition.

Snow plow

Lot #260 (Sale Order 264 of 492)

Snowplow blade, which was taken off a state DOT truck, Henderson model 11 x 42 by one S serial number RSP ? 01686, includes framework and mounting bracket. Will fit a Sterling dump truck.

Running gear

Lot #261 (Sale Order 265 of 492)

Running gear, John Deere, tire size 11 L ? 15, designed to transport pipe on a job site.

Tank

Lot #262 (Sale Order 266 of 492)

Tank, 500 gallon fuel tank, mounted on a running gear, equipped with FilRight heavy duty electric pump, single wall tank, painted red in color.

Trench box

Lot #263 (Sale Order 267 of 492)

Trench box, Kundel model 5L, SN4823, 6x24, no certification papers, includes spreader bars, no apparent tears or dents, good appearance.

Trench box

Lot #264 (Sale Order 268 of 492)

Trench box, 8x16, no certification papers, spreader bars, apparent dents, fair appearance.

Trench box

Lot #265 (Sale Order 269 of 492)

Trench box, 8x20, no certification papers, includes spreader bars, no apparent tears or dents, includes (8) 62 inch spreader bars 8 1/2 inch outside diameter.

Trench box

Lot #266 (Sale Order 270 of 492)

Trench box 48" x 16' length, 8 inches thick, spreader bars, Minor tears, minor dents, appears this has not been used for sometime, no certification paper.

Trench box

Lot #267 (Sale Order 271 of 492)

Trench box, 70" x 16', spreader bars, serial number 11400, no tares, minor dents, no certification papers.

Trench box

Lot #268 (Sale Order 272 of 492)

Trench box, 24' x 4', serial number 11401, spreader bars, no certification papers, no apparent tears , minor dents.

Trench box

Lot #269 (Sale Order 273 of 492)

Trench box, constructed of aluminum, 61 inches in height, 20 feet in length, 10 inches thick, offset spreader panels, does not have smooth surface interior.

Trench Box

Lot #269A (Sale Order 274 of 492)

Trench Box 50"x195", 4 spread bars, no certification papers.

Trench box

Lot #269B (Sale Order 275 of 492)

Trench Box, welded box, no adjustment, 12'x2', no certification papers.

Trench Box

Lot #269C (Sale Order 276 of 492)

Trench Box, 123"x51" no spreader bars, 123"x51" no spreader bars, no certification papers.

Shoring

Lot #270 (Sale Order 277 of 492)

Shoring, aluminum trench shoring, approximately 14 pieces with manual hydraulic pumps, some of the shoring plates are bent.

Rock box

Lot #271 (Sale Order 278 of 492)

Rock box, approximately 4-6 yard capacity, overall appears to be in fair to good condition.

Rock box

Lot #272 (Sale Order 279 of 492)

Rock box, has a good appearance, does not show signs of dents or tears, approximately 12 to 16 yard capacity, faded yellow in color, good appearance good condition.

Rock box

Lot #272a (Sale Order 280 of 492)

Rock box, 10 foot length 48 inches width 31 inches height older unit appears to be in fair condition.

Rock box

Lot #273 (Sale Order 281 of 492)

Rock box, heavy duty design, proximately 6 to 8 yard capacity, appears be in good condition.

Rock box

Lot #274 (Sale Order 282 of 492)

Rock box, Contractor Solution, red in color, approximately 2 yard capacity, B86, good appearance, good condition

Rock box

Lot #275 (Sale Order 283 of 492)

Rock box, Contractor Solution, 2 yard capacity, B76, red in color, appears to be in good condition.

Shoring

Lot #276 (Sale Order 284 of 492)

Shoring, Speed Shore model MG ? 08.5X4, serial number 06039, rated shield capacity 1900 psi, a quantity of two which stacked on top of each other, good condition.

Shop

Lot #277 (Sale Order 285 of 492)

Automotive 4 post automobile and light truck hoist, 10 foot width, 20 foot length, 25,000 pound max capacity, electric over hydraulic.

Dragline

Lot #278 (Sale Order 286 of 492)

Dragline, Koehring model 205, serial number 623 8 60 foot lattice cord boom with a drag bucket. Has been used as a yard ornament, buyer removes at buyers expense. Engine is seized. Can only be removed during dry conditions.

Empty

Lot #279 (Sale Order 287 of 492)

Empty

Bucket

Lot #280 (Sale Order 288 of 492)

Hendrix drag bucket Perforated, serial number 28565, bare bucket.

Barriers

Lot #281 (Sale Order 289 of 492)

ROO guards, Inc. molded plastic barrier delineators, 3'36" height 67 inch width, modular, uses water as a ballast.

$80.00 x 10 = $800.00 Total