Jet Geared Head Engine Lathe

Model 1440-3gph

Serial 9803gc200

3 phase 240v

Comes with tool post holders

Chucks

 Accessories included. Dial indicators, 4 jaw chuck, steady rest, gearing.  Note:  5th in line for removal Wednesday.  Call for details.

Voest Engine Lathe

3 phase 240v

Accessories included: 3 jaw chuck, 4 jaw chuck, 15in faceplate, quick change tooling, steady rests

Logan Turret Lathe 1957-1
3 phase 240v
Accessories included. Turret attachment, steady rest, face plate, stop, belts.  6th in place for removal.  Should be Thursday - Friday.  Call for details. 

Bridgeport 2J Mill with DRO.
Kool Mist sprayer, Tibon ways
DRO Y axis is non functional.  3rd for removal. 
Tuesday-Wednesday.
 

36in table.  Lot 5 should be the 2nd removal.  Monday - Tuesday.  Call for additional information.  If not picked up iin time a domino will occur and we wont be able to do the removal on time.  Rental on Forklift is 5 days only.

Magnetic 6x18 chuck, coolant reservoir. Comes with spare grinding wheels.

Walker Turner Drill Press. Model 01100, Serial 011242

Pittsburgh 1 Ton Engine Hoist. 3 ton bottle jack. Complete including pump handle and strap.

Lassy Tapper 10-ER. Includes taps with collets and light.

Craftsman model 150

Measures 30x70x26

Amrox LDC814 horizontal band saw.

Capacity: 13? W x 8-1/2? High

Speed Range: 55/108/153 FPM

Blade Size: 1? x .032? x 120?

Motor HP: 1

Electrical: 115V/1PH

Wilton Geared Head Drill Press. Type 24500
Wilton Type: 24500 gear headed drill press 12 1-2 in throat 8 speed: 85-1460 rpm 220V HP: 1.3 60 Hz Amp: 5.6 20x16 T-Slotted Table Jacobs Ball Bearing Chuck

Oliver Of Adrian drill grinder with GE motor. Accessories included.

Fowler Precise End Mill Grinder with Dayton Motor

K. O. Lee Tool Universal Tool and Cutter Grinder BA960.
Table Working Surface:27-1/4? x 5-1/4?
Table Traverse:14?
Vertical Movement of Column:7?
Grinder Electrical:230V/3PH

Bridgeport 12 inch rotary table and accessories. Serial 1496
Bridgeport 12? Horizontal Rotary Table.  118 Pounds

Walker Turner Drill Press. Model 1316, Serial 000007. Baldor motor. Small vice included.
15", 1/2hp, 6+ " quill travel

Small 1inch wide belt grinder

Brunner 80 Gallon air compressor. On steel casters

Craftsman bench grinder 397.19451 with wire wheel and stand

Speed D Burr Rock tumbler. Media included.

Home made cut off wheel table.

Custom 12in chop saw setup. Baldor motor. Rolling metal stand and cut-off wheels

Crown electric pallet jack. 1500lb capacity. Fully operational, charger built in.

OCC 1 ton chain block hoist. Chain hoist only

Tubing bender with dies. Head has been cut off to mount on a shop table.

GR-B201 Bench Grinder. 1/2hp. Flap disc and Sand-O-Flex installed

B-309 Bench Grinder with grinding wheel installed

Very heavy duty steel table on large steel casters. Modern Caster 38 Series. 40" top, 36" tall.

Davis and Wells 12in table saw. 240v 3 phase.

Small steam engine with belt driven ram system for replicating the gold ore refining process.

E.D. Bullard Company San Francisco Canister. Measures 9 in long.

It was back in 1898 when Edward Dickinson Bullard furnished San Francisco gold and copper miners with mining equipment. When his son E.W. Bullard returned from World War I, E.W. and his father worked together to pioneer equipment to keep miners safe in the hazardous mines.

General Electric 5k184jl1763 motor. 7 1/2 hp. 230/460 volts, 3 phase. 3495 RPM.
New in box

Various mill tooling with storage container

Multiple helicoil kits, tools and coils

Riv-Nut tool and supplies with box.

Large collection of standard sized taps from small to large.

2 Metal cases of reamers and one stand of various sizes.

3 Drill blank/drill rod sets

7 Drill chucks and keys. Jacob's and Supreme

Center drills, Drill bit organizers, case and loose bits.

Standard size Allen Wrenches with organizer bin

Multiple oring kits, snap rings, grommets , zerk fittings and cotter pins

Kurt D675-7468 Machine Vice. Two handles and t mounts included. Soft and hard jaws included.

Kurt D675-43985 Machine Vice. Two handles and t mounts included. Soft and hard jaws included.

25 5C Collets. New in boxes, various sizes from 1/16 to 31/32

22 5C Collets with stand. Hardinge, Fowler, Grand

26 5C Collets with stand. Hardinge, Kent, Neal Skokie

32 5C Collets with stand. Hardinge, Fowler, Neal Skokie

Collets, collet stops and accessories

Tapmatic tapping attachment with accessories

Fowler 52-030-006, Mitutoyo 505-611, Tesa

GouGen 150mm, Pittsburgh 60248 6" long reach

18 Inch Vernier Calipers. Dial gauge. Wooden box.

Rulers, calipers, straight edge, angle finders

16 Inch Height gauge. CSE, made in Germany.

Brown and Sharpe Micrometer set. Missing smallest Micrometer. One piece is Craftsman. One original Brown and Sharpe box.

Westover RHB-18 Handheld Refractometer with case and instructions

Titan Tool Supply Centering Microscope with case and instructions

News Yuasa Indexing Head for 5c collets

Finn Spindex Indexing Head for 5c Collets

Whistler IC-3409PX 9mm Wireless inspection camera

Accu-Finish Series II with stand
Accu-Finish is designed to provide accurate angles and superior finishes on virtually all tool materials. As the name implies, Accu-Finish is not for rough shaping where large amounts of tool material must be removed.

This is best done on a high speed bench grinder or similar machine. Tool finishing or resharpening dull tools is the strength of Accu-Finish. Since proper tool finishing is by far the most critical job, the Accu-Finish works where the machinist needs the most help.

Assortment of cutting and boring tools with metal rack

3 Large die wrenches and metal box of dies

Standard size tap and die set with wooden case. Two extra die handles included.

Metric tap and die set. Missing die handle.

GT&D CORP'N No8 large tap handle

Large selection of tooling inserts, mostly carbide.

6 metal cases of drill bits. One metal stand with bits.

Imperial Brass Tubing bending tools with case. 260-F 360-F

Screw drivers, Wrenches, pliers

About 27 various sized c clamps

Machinist parallel clamps. 14 total.

12 welding clamps, 5 different sizes. One quick clamp

Step block clamp fixturing set. Comes with wall mount organizer

Sargon 721 DRO - single axis  only -  used for Lathe or Mill digital read outs

Penske ignition analyzer 21019 in box.
Diagnostic tester.

Lathe knurling tool with 3 sets of inserts.

5c collet holder. Mounts vertically or horizontally

Many different sizes and styles.  Approximately 60 to 80 each.

Spindle l o (type of nose)

9/16 to 1 inch. 8 each..

6 pry bars. 2 rolling head pry bars

Milwaukee Jig Saw 6256 with blades

Stanley laminate trimmer 262 with case and accessories

3 glue guns and 2 bags of glue sticks
Black and Decker cordless glue gun

Moto-tool, Drexel style tool. Etch-o-matic chemical Etcher and ideal Electrical etcher

General Radio Company Type 1565-A Sound Level Meter and Vibration Pickup.  Model number 1560-P52

Simpson 388 Therm-o-meter with extra probe 0187

Mhc precision parallel set 637-7030. 1/8" 10 pairs

4 different size and style pullers

Hi-Tech model 1265-K

Bridgeport right angle head attachment

3 Horizontal milling saw cutters with a large assortment of blades.  
approximately 50 each

Approximately 35 each. Various sizes.

Model RCH-31365-B, used.

Used for 6 inch angle lock vice and Bridgeport.

6 Inch Bridgeport Vice. T Mounts included. No handle included

Modified tool holders, taper adapters, boring bar, R8 adapters (modified), tapered manderls, large tool holder.

ENCO NT-50-1 SPAIN

PETERSON FLUSH ARBOR 50 1

Vice marking 26/177, measures 2.5x4.5

Precision ground plate, measures 3x4.5

Used for Graziano lathes. Morris taper with adapters.

Criterion DBL-103 boring head and inserts. Grand Teterboro B0 2-8. Small collection of boring tools and accessories

Yuasa News Indexer. 8 inch chuck

13 Countersink end mills. 39 Corner Rounding end mills. Wooden organizers included.

Some are interchangeable piloted counterbores and some are solid.

T Mount tool stops

Hole saws from 1in to 3.5in

Diamond tipped hole saw drill bits.

5 Fly Cutting Heads

Horizontal Vertical Rotary Table. 8in table.

110v electric demagnetizer
 

Yuasa News 599-301 Tilting Adjustable Tailstock Footstock: 9-12" Swing, +/- 30 Deg, TS-2 casting. Point adjusts down to a minimum 4-1/2" from the table and as high as 6-3/8" at level with a +/- adjustment of 30 degrees each way.

To include taps, misc. ball end mills, carbide. Various model numbers. Storage container measures 34x39.

Adjustable angle plate.  Measures 6x8

Measures 5.5 x 7

Measures 12 x 9

Measures 9x7

Measures 4x5x6 and 5.5x5x4

Measures 7x6x4

Measures 5.5x7 and 3x3

Bin measures 12x21x5

Milwaukee Corded Sawzall 6511 with metal case and blades

12 each.

Carbide and high speed

3 to the lot

1 1-4

2 kg

2 etc

1 marked but not Brubaker

1 13-16

Various sizes

12 each

Mixed sizes, 19 plus.

Mallets, sledge, 8 each.

Various sizes. Approximately 20 plus.

Shars.Share. box measures 9x5x3

Approximately 25 each.

Doall SFP Bandsaw. Blade welding attachment and accessories included.

Carolina Tool and Equipment 30 ton/60,000lbs Hydraulic press. On casters.